S P SP-006-02-A5 EV Charger User Guide
- June 10, 2024
- S P
Table of Contents
S P SP-006-02-A5 EV Charger User Guide
-
Status LED
The light communicates the status of the chargepoint. Refer to the LED chart to understand the different light signals. -
Override Button
The override button can be used to override any smart charge schedules that you have set. You can use it to initiate an immediate vehicle charge or to clear an RCM fault. -
Charge Socket Door
The spring-loaded charge socket door prevents water and dirt from entering the socket. -
Courtesy Lights
The courtesy lights will turn on automatically when the charge socket door is opened. The lights will turn off after 25 seconds. -
Charger Socket
The Charger Socket is a universal type 2 socket and can be used with all kinds of electric vehicle. During a charge, the charging cable will lock onto the charger socket. To lock the charging cable permanently into the charger socket, simply open the app and select “tethered mode”. -
Setup Button
The set-up button is used to configure the charger. This must be done by a certified electrician.
Quick start guide
START CHARGING
To start charging, connect your charging cable to the vehicle and then plug
the charging cable into the charger. The charge will begin automatically and
you will see the status light change to green. During a vehicle charge, the
charging cable will lock itself into the charger socket.
STOP CHARGING
To stop charging, first unlock the vehicle and disconnect the charging cable.
You can then remove the cable from the charger socket. N.B. The charging cable
will remain locked into the charger until the charge is complete or has been
stopped by the car.
SMART CHARGING
Our app allows you to control smart charging features like a scheduler and
solar panels.
CLEANING
Your charger will arrive ready to go, so you don’t need to clean it before
usage. To keep your charger looking brand new, give the unit an occasional
clean with a damp cloth and an all-purpose household cleaner. Avoid using
strong chemicals containing oil or alcohol as these could discolour paint and
wood. Never use a high-pressure water jet to clean your charger.
STATUS LIGHTS
CHARGER IN STANDBY
CAR CONNECTED
CHARGING IN PROGRESS
CHARGER LOCKED
SMART SCHEDULE ACTIVE
FIRMWARE UPDATE (FLASHING)
IDENTIFY CHARGER (FLASHING)
FAULT DETECTED (FLASHING)
EMAIL: support@simpson-partners.com
WEB: simpson-partners.com/support
TEL: 01793315197
References
- partners.com - partners Resources and Information.
- Simpson & Partners EV Charger
- Support - Premium Home EV Charger
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>