Sunnydaze Decor HB-726 Mini Greenhouse Instruction Manual

October 30, 2023
Sunnydaze DECOR

Sunnydaze Decor HB-726 Mini Greenhouse

Product Information: Mini Greenhouse

The Mini Greenhouse is a compact and easy-to-assemble structure designed to provide an ideal growing environment for your plants. It comes with all the necessary parts and connectors, including vertical tubes, horizontal tubes, roof tubes, base side tubes, and a cover. The frame is made of durable materials and can be easily assembled on a clean surface. The greenhouse cover is packaged inside out for easy installation and comes with ties that allow you to secure it to the frame. The product also includes helpful hints and assembly drawings to guide you through the process of putting it together.

Product Usage Instructions

Frame Assembly

  1. Identify and separate all frame tubes and connectors.
  2. Insert the narrow end of Horizontal Tube w/ Torsion Spring (4) with Horizontal Tube (2) as indicated in the drawing. Repeat this step with the four remaining sets of tubes.
  3. Connect four 3-Way Elbow Fittings (A) to two Base Side Tubes (5) and two sets of Horizontal Tube (2+4) as indicated in the diagram.
  4. Insert four Vertical Tubes (1) into the tops of the elbow fittings. Connect four Tee Fittings (E) to two sets of Horizontal Tubes (2+4). Align the tee fittings with the tops of the vertical tubes as indicated in the diagram.
  5. Connect two Elbow Fittings (A) to the last set of Horizontal Tubes (2+4). Then, insert the straight side of four Roof Tubes (3) into the elbow fittings. Insert the curved ends of the roof tubes into the tee fittings.
  6. Tap all connectors with a rubber mallet to ensure components are tightly fitted.

Cover Installation

  1. Unfold Cover (6) on a clean, soft surface that is away from any sharp objects or debris.
  2. Locate the ties on the peak of the cover and tie them to the top of the roof.
  3. Carefully unfold the cover over the frame, taking care not to pull too hard as doing so may rip the cover.
  4. Secure all remaining ties to the frame.

General Use & Care

Place your greenhouse on raised, level ground to ensure good drainage. Select a location that will receive maximum sun exposure and protect it from prevailing winds by placing it next to a structure such as a house or garage. Use sound judgment when using your new greenhouse as information provided is a basic guide and may not be suited for your particular needs.

Contact Information

If you have any questions, comments, or concerns, feel free to contact us by phone at 833-982-1977, by email at customerservice@sunnydazedecor.com, or via our contact us page at https://tiny.cc/SunnydazeContact.

Purchase Date: / /
Order/Customer Reference Number:
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email: customerservice@sunnydazedecor.com, or via our contact us page at https://tiny.cc/SunnydazeContact

MINI GREENHOUSE
HB-535 • HB-726
Review assembly drawings carefully and follow the care instructions. Save this document for future reference. Assemble components on a soft, clean surface to avoid scratching or damaging any surfaces.
Inspect packaging to ensure all  parts are accounted for before disposing of packing materials.

FRAME ASSEMBLY

HELPFUL HINTS
Identify and separate all frame tubes and connectors, so they are easy to identify during assembly.
Ensure all tubes get fully inserted into the connectors. A tighter and smaller frame enables the greenhouse cover to slide on easily

TIP : To avoid pinching your fingers, angle the tube with the torsion spring so the spring is on the inside the other tube, then align the tubes so they are straight and push them together.
Firmly insert the narrow end of Horizontal Tube w/ Torsion Spring (4) with Horizontal Tube (2) as indicated in the drawing. Repeat this step with the four remaining sets of tubes.Sunnydaze-Decor-HB-726-Mini-Greenhouse-
fig-3Sunnydaze-Decor-HB-726-Mini-Greenhouse-
fig-4 NOTE : The cover is packaged inside out for easier installation.

COVER INSTALLATION

(not shown)
Unfold Cover (6) on a clean, soft surface that is away from any sharp objects or debris. Locate the ties on the peak of the cover and tie them to the top of the roof. Carefully unfold the cover over the frame, taking care not to pull too hard as doing so may rip the cover. Then, secure all remaining ties to the frame.

General Use & Care

We cannot foresee every possible scenario or climate in which this greenhouse could be used. Information provided is a basic guide and may not be suited for your particular needs. Use sound judgment when using your new greenhouse.

CHOOSING A LOCATION
Place your greenhouse on raised, level ground to ensure good drainage. Select a location that will receive maximum sun exposure. Help protect your greenhouse from prevailing winds by placing it next to a structure such as a house or garage.

WATERING
Use mist or the lowest setting on a hose sprayer. Avoid super-cold water as it could shock your plants. The best time to water plants is in the cooler hours of the morning. Avoid watering plants too late in the evening, as excess moisture promotes plant disease and fungal infections. Frequently check soil moisture throughout the day; this is especially important in warm weather. If soil becomes too dry, water the soil only. Applying water directly to plants during peak sunlight hours can damage plants.

IDEAL GREENHOUSE TEMPERATURE
The ideal temperatures to maintain inside your greenhouse will depend on the plants you have inside. Always remember that all plants and seeds have preferred growing and germination requirements─research ideal growing conditions for your plants or contact an expert at your local garden center.

COOLING
To lower the temperature inside your greenhouse, open the zippered door(s). You may also consider using a shade cloth (not included).

VENTILATION
It is essential to ensure good air circulation and ventilation year-round. Stagnant air and/or excessive humidity levels may result in fungus and disease, which can damage your plants.

MAINTENANCE AND STORAGE

Hose down your greenhouse using a low-pressure garden hose with a sprayer. Mild dish soap and a soft cloth may be used to help remove stubborn dirt and pollen build-up. Do not use harsh chemical cleaners. In climates where snow and ice accumulate, disassemble and store in a cool, dry location. Ensure that the greenhouse is clean and COMPLETELY DRY before storing. Mold and mildew can grow if it is stored wet or even slightly damp. Use extreme care when disassembling and storing this greenhouse. Carefully remove the cover and fold it. Carefully pull frame tubes out of the connectors. Place all components into the original box or a plastic tote. Use caution when storing the cover; avoid placing it on or near the sharp edges of the frame components.

REPAIRING RIPS AND TEARS
The greenhouse cover is relatively durable, but it is still possible to puncture holes in the material if care is not taken when setting up, taking down, and storing the greenhouse. A poly patching tape or film (not included) may be used for repairing punctures and tears in the cover. Before purchasing any repair tape or kit, ensure it is suited to the material of your greenhouse cover. Apply as directed by the manufacturer.
WARNING: THE ONE-YEAR WARRANTY DOES NOT COVER DAMAGES OR DEFECTS CAUSED BY USER ERROR, IMPROPER CARE, THE APPLICATION OF CHEMICAL CLEANERS OR REPAIR KITS.

The following situations are not caused by faulty materials or workmanship and are not covered by warranty:

  • If cover tears due to incorrect frame assembly or being forced onto the frame.
  • If the cover tears due to water accumulating on the roof. Water accumulation can cause the cover to stretch and possibly collapse the greenhouse completely.
  • If the greenhouse poles or fittings are broken due to high winds or incorrect assembly.
  • The cover rips or tears from sharp objects, including but not limited to garden tools and anchoring mechanisms.
    Most cover tears on greenhouses are due to excessive force, environmental conditions, or mechanical damage to the zipper and as such are not covered by warranty.

SAFETY STATEMENTS & WARNINGS

  • Anchor the greenhouse to prevent tipping and potential damage from prevailing winds.
  • Keep this greenhouse a safe distance from heat sources such as fire pits, patio heaters, and grills.
  • Do not use harsh chemicals or abrasive materials to clean.

Any modification to the product or failure to follow recommended care will void the product warranty.

If you experience issues with assembly or the product was damaged during shipping, please contact our customer service team through one of the methods mentioned at the top Please have the item number and order information ready to expedite response time

WARNING!
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use, inadequate maintenance, or neglect of this product.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Sunnydaze DECOR User Manuals

Related Manuals