SAMSUNG Galaxy S23 Ultra Screen Armour Protector Instructions
- October 30, 2023
- Samsung
Table of Contents
SAMSUNG Galaxy S23 Ultra Screen Armour Protector
INSTALLATION INSTRUCTIONS
-
Thoroughly clean your device’s screen with cleaning accessories.
-
Place the applicator frame down evenly onto the front of the phone.
-
Remove the bottom protective film from the Screen Armour, being careful not to make contact with the adhesive surface.
-
Place the Screen Armour onto the screen within the applicator frame by first lowering the top and then the bottom end and being careful not to make contact with the adhesive surface.
-
Secure the Screen Armour by placing gentle pressure with a fingertip in the center of the screen
-
Once the Screen Armour is secured, remove the applicator frame.
-
Press down gently along the sides of the device screen to ensure the Screen Armour has adhered securely to the edges.
-
Use the sharp corner of the squeege to swipe over the fingerprint sensor slowly from one side, until the circle adhesive area in the middle turns dark.
-
Use the microfibre cloth to remove any bubbles by wiping from the center of the Screen Armour outwards.
IMPORTANT NOTICE
For best results the device screen must be completely free of all dirt, marks
and particles prior to the application of the Screen Armour.
Failure to do this may prevent the Screen Armour from adhering properly,
resulting in a poor fit.
The cleaning wipe provided is highly flammable. Keep away from open flames and
wash hands thoroughly after use.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>