beko BDFT710442WB Washer Dryer User Manual

beko BDFT710442WB Washer Dryer

Product Information: Washer-Dryer

The BDFT710442WB Washer-Dryer comes with a user manual in EN language and has a table of contents that includes safety instructions, important instructions for the environment, technical specifications, installation instructions, preliminary preparation, operating instructions, and more.

Safety Instructions
The safety instructions cover various aspects of using the washer-dryer, including intended use, safety of children and vulnerable persons, electrical safety, handling safety, installation safety, operational safety, drying safety, and maintenance and cleaning safety.

Important Instructions for Environment
The important instructions for the environment include compliance with the WEEE directive and package information.

Technical Specifications
The technical specifications provide information on the product’s dimensions, weight, capacity, power supply, water supply, and more.

Installation Instructions

The installation instructions cover appropriate installation location, assembly of bottom panel covers, removing transportation safety bolts, connecting to water supply, connecting the drain hose to the drain, adjusting the stands, electrical connection, and handling the product.

Preliminary Preparation

The preliminary preparation section includes sorting the laundry, preparing laundry for washing, tips for energy and water saving, start-up instructions, loading the laundry, correct load capacity, using detergent and softener, tips for efficient washing and drying, and displayed program duration.

Operating Instructions

The operating instructions cover various aspects of using the washer-dryer, including control panel instructions, symbols on the display, preparing the machine, selection of washing programs, washing programs, temperature selection, spin speed selection, drying programs, washing and drying programs, program and consumption table, auxiliary function selection, drying steps, end time, starting the program, loading door lock, changing the selections after the program has started, cancelling the program, end of program, and standby mode.

Product Usage Instructions: BDFT710442WB Washer-Dryer

1. Read and follow all safety instructions and important instructions for the environment provided in the user manual.
2. Follow the installation instructions to properly install the washer-dryer in an appropriate location.
3. Sort the laundry and prepare it for washing by following the instructions provided in the preliminary preparation section.
4. Load the laundry into the washer-dryer according to the correct load capacity and use the recommended amount of detergent and softener.
5. Select the appropriate washing program, temperature, and spin speed according to your laundry’s needs.
6. If using the dryer function, select the appropriate drying program and follow the tips for efficient drying provided in the preliminary preparation section.
7. Select any auxiliary functions as needed and adjust the end time if desired.
8. Start the program and wait for it to complete. The washer-dryer will automatically enter standby mode when finished.
9. If necessary, change selections or cancel the program by following the instructions provided in the operating instructions section.
10. After use, follow the maintenance and cleaning safety instructions provided in the user manual to properly care for your washer-dryer.

Washer-Dryer
BDFT710442WB
2820530055/ EN/ / 02/08/2022 09:57

Please read this user manual first!
Dear Customer, Thank you for choosing Beko product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product. Follow all warnings and information in the user manual. Thus, you protect yourself and your product against possible dangers. Keep the user manual. If you hand over the product to someone else, provide the user manual as well. Warranty terms, usage and troubleshooting methods of your product are in user guide. Symbols and Definitions The following symbols are used in the user guide:
Danger that could result in death or injury. Important information or useful hints about usage. Read the user manual. Recyclable materials.
Hot surface warning. WARNING Danger that may result in property damage to the product or its environment.
EN / 3

Safety Instructions

This section includes the safety instructions necessary to prevent the risk of personal injury or material damage. Our company shall not be held responsible for damages that may occur if these instructions are not observed. · Installation and repair opera-
tions shall always be performed by Authorised Service. · Use original spare parts and accessories only. · Do not repair or replace any component of the product unless it is clearly specified in the operation manual. · Do not modify the product.
1.1 Intended Use
· The service life of your product is 10 years. During this period, original spare parts will be available to operate the appliance properly.
· This product has been designed for domestic use. It is not for commercial purposes or it should not be used out of its intended use.
· Use only for washing and drying textile products that are marked accordingly.
· The manufacturer assumes no responsibility for any damage due to misuse or mishandling.

· This appliance is intended to be used in household and similar applications. For example;
­ Personnel kitchens of stores, offices and other work environments;
­ Ranches,
­ By customers of hotels, motels and other accommodation facilities
­ Bed and breakfasts, hostellike environments
­ Common areas of apartment blocks or laundries.
1.2 Safety of Children, Vulnerable Persons and Pets
· This product may be used by children aged 8 years and older and persons with underdeveloped physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a the product safe way and the hazards involved.
· Children under the age of 3 should be kept away unless continuously supervised.
· Electrical products are dangerous for children and pets. Children or pets should not play

EN / 4

with, climb on top or inside the product. Check inside the product before use. · Use child lock to prevent children from intervening with the product. · Do not forget to close the loading door when leaving the room where the product is located. Children and pets may get locked inside and drown. · Children should not perform cleaning and user maintenance works without an adult’s supervision. · Keep the packaging materials away from children. Risk of injury and suffocation. · Keep all detergents and additives used for the product away from children’s reach. · Cut the power cable and break and deactivate the locking mechanism of the loading door before disposing of the product for children’s safety.
1.3 Electrical Safety
· Product should be unplugged during installation, maintenance, cleaning and repair procedures.
· Damaged power cables should be replaced by the authorised service in order to prevent possible danger.

· The product should not be fed via an external switching device such as a timer or connected to a circuit that is regularly switched on and off by a device.
· Do not tuck the power cord under the product or to the rear of the product. Do not put heavy items on the power cord. Do not over bend, crush and touch the power cable to sources of heat.
· Do not use an extension cord, multi-plug or adaptor to operate your product.
· The plug shall be easily accessible. If this is not possible, a mechanism that meets the electrical legislation and that disconnects all terminals from the mains (fuse, switch, main switch, etc.) shall be available on the electrical installation.
· Do not touch the plug with wet hands.
· When unplugging the appliance, don’t hold the power cord, but the plug.
· Make sure the plug is not wet, dirty or dusty.
1.4 Handling Safety
· Unplug the product before moving, remove the water outlet and water main connections. Drain any water left inside the product.

EN / 5

· This product is heavy, do not handle it by yourself. Do not hold extruding parts such as the laundry loading door to lift and move the product. The upper tray should be tightly fixed for moving.
· Your product is heavy; it should be carried carefully by two people if a staircase is involved. It may cause injuries if your product falls on you. Do not hit and drop the product while carrying.
· Carry the product in an upright position.
· Make sure that the hoses as well as the power cable are not folded, pinched or crushed after the product is fitted into its place after installation or cleaning procedures.
1.5 Installation Safety
· Check the information on the manual and installation instructions to prepare the product for installation and make sure the electrical mains, clean water mains and water outlet are suitable. If not, call a qualified electrician and plumber to have them make the necessary arrangements. These operations are the responsibility of the customer.

· Check for any damage on the product before installing it. Do not have the product installed if it is damaged.
· Injuries may occur if hands are put into uncovered slots. Close the holes of the transportation safety bolts with plastic plugs.
· Do not install or leave the product at locations where it may be exposed to external environment conditions.
· Do not install the product at locations where the temperature drops below 0 ºC.
· Do not place the product on a carpet or similar surface. It would create fire hazard since it cannot receive air from underneath.
· Place the product on a level and hard surface and balance with the adjustable legs.
· Connect the product to a grounding plug protected by a fuse suitable to the current values on the type label. Make sure the grounding is carried out by an expert electrician. Do not use the product without suitable grounding to local/national regulations.
· Plug the product in a socket with voltage and frequency values suitable to those indicated on the type label.

EN / 6

· Do not plug the product to

· There is a risk of contact with

loose, broken, dirty, greasy

electrical pieces when the up-

sockets or sockets that has

per trays is removed. Do not

come out their seats or sock-

dismantle the upper tray of the

ets with a risk of water contact. product.

· Use the new hose set provided · Place the product at least 1 cm

with the product. Do not re-use away from the edges of fur-

old hose sets. Do not make

niture.

additions to the hoses.

· Make sure the room in which

· Connect the water inlet hose

the installation performed is

directly to the water tap. The

adequately ventilated, as there

pressure from the tap should

may be a risk of undesirable

be minimum 0.1 MPa (1 bar)

gases coming out of the device

and maximum 1MPa (10 bars). igniting other fuels in the room

10 to 80 litres of water should

or interacting with an open

be running from the tap in a

flame.

minute in order for the product to function properly. If the wa-

1.6 Operational Safety

ter pressure is above 1 MPa

· When you are using the appli-

(10 Bars), a pressure-reducing ances, use only detergents,

valve should be fitted. The

softeners and supplements

maximum allowed temperature suitable for washing machines.

is 25°C.

· Do not use chemical solvents

· Fit the end of the water dis-

on the product. These materi-

charge hose to the dirty water

als contain an explosion risk.

discharge drain, the sink or the · Do not operate defective or

bathtub.

damaged products. Unplug the

· Place the power cable and

product (or turn off the fuse it

houses in locations without risk is connected to), turn off the

of tripping.

water tap and call an author-

· Do not install the product be-

ised service.

hind a door, a sliding door or at · Do not place sources of igni-

another location that will pre-

tion (burning candle, cigar-

vent the door from opening

ettes, etc.) or sources of heat

completely.

(irons, furnaces, ovens, etc.)

· If a drier is to be placed on the on top of or near the product.

product, fix with a suitable con- Do not put inflammable/explos-

nection apparatus obtained

ive materials near the product.

from the authorised service.

EN / 7

· Do not get on the product. · Unplug the product and turn off
the tap if you will not be using the product for long periods. · Detergent/maintenance materials may splash out of the detergent drawer if it is opened while the machine is working Contact of the detergent with your skin and eyes is dangerous. · Make sure pets do not climb inside the product. Check inside the product before use. · Do not force open the locked loading door. The door will open once the washing is completed. If the door does not open, use the solutions for “loading door does not open” error in the Troubleshooting section. · Do not wash elements contaminated with gasoline, kerosene, benzene, reducers, alcohol or other inflammable or explosive materials and industrial chemicals. · Do not directly use dry cleaning detergent and do not wash, rinse, spin or dry laundry contaminated with dry cleaning detergent. · Do not place your hands into the rotating drum. Wait until the drum no longer rotates.

· Do not place your hand or a metal object under the washing machine.
· If washing laundry at high temperatures, the discharged washing water would burn your skin if in contact with your skin, for ex. when the draining hose is connected to the tap. Do not touch the discharge water.
· Take the following precautions to prevent formation of biofilm and malodours:
­ Make sure the room where the washing machine is placed is well ventilated.
­ Wipe the door gasket and loading door glass with a dry and clean cloth at the end of the programme.
· The glass of the loading door will heat up when washing or drying at high temperatures. Therefore, do not allow especially children to touch the loading door glass while washing or drying.
1.7 Drying Safety
· Laundry that has been previously washed, cleaned, contaminated or stained with gasoline/gas, dry cleaning solvents or other inflammable/ explosive materials should not be dried in the machine be-

EN / 8

cause they give off inflam-

the device completely. Do not

mable or explosive vapours.

touch the metal door located

Otherwise, fire hazard arises.

inside of the door glass. There

· Laundry contaminated with

is a risk of burns due to high

materials such as vegetable or temperatures.

mineral oil, acetone, alcohol, · During Drying programmes, a

gasoline, gas oil, stain re-

cooling step is performed as

movers, naphtha, turpentine,

the last step to ensure that the

paraffin or paraffin removers

laundry remains at a temperat-

should be washed separately

ure where it will not be dam-

in hot water by adding extra

aged. You may be exposed to

detergent before being dried in hot steam if you open the

the washing machine with

cover without completing the

dryer. Otherwise, fire hazard

cooling step. Risk of seething.

arises.

· If the drying programmes are

· Do not dry textile products that interrupted (as a result of pro-

contain predominantly foam,

gramme cancellation or power

rubber or rubber-like parts

failure), the laundry in the ma-

(e.g. shower caps, waterproof

chine may be hot. Be careful.

textile products, rubber

· Do not stop the machine be-

products and clothes) or the

fore the drying programme is

ones that are filled and dam-

completed. If you have to stop

aged (e.g. Pillows or coats).

the machine, take out all the

There is a risk of burns.

laundry inside of it and place

· If you use a laundry ball, deter- them in a suitable place and

gent scale, laundry cage or

wait for them to cool.

ball in your machine, these

· Your product is suitable to op-

products may melt during dry- erate between the temperat-

ing. If you are going to choose ures of 0°C and +35°C.

the drying feature, do not use · Ambient temperatures

these products. Otherwise, fire between 15°C and +25°C are

hazard arises.

ideal for your product.

· If you use industrial chemicals · Do not overload the machine

for cleaning, do not use the

for drying. Observe the spe-

drying function. Otherwise, fire cified maximum load levels for

hazard arises.

drying.

· The door becomes very hot

after drying process. After dry-

ing is over, open the door of

EN / 9

· If the laundry has been washed with a stain remover, run an additional rinsing speed before starting the drying speed.
· Do not dry leather laundry and laundry containing leather (such as leather tags on jeans) in the machine. The colour left by the leather parts may smear on other textiles.
· If there is a problem that you cannot solve using the information given in the safety instructions section, turn off and unplug the machine and call an Authorized Service.
· In your washer-dryer, you can only wash laundry, only dry laundry or do both of these processes. The machine should not be used for a long period of time only for drying wet laundry. While the machine is only used for drying, it should be run empty in a short washing programme every 15 starts.
· Before putting laundry in the machine, check all of them and make sure that there is no object such as lighter, coin, metal object and pin, etc. in their pockets or inside of them.
· Lingerie that has metal parts should not be dried in the machine. Metal parts may come

off during drying and cause damage to the machine. Put them in a bag or pillow case. · Do not dry large laundry such as tulle curtains, curtains, sheets/beddings, blankets, rugs in the machine. Laundry may get damaged. · Do not dry unwashed laundry in the machine. · Do not use softener or antistatic agent unless recommended by the manufacturer. · Products such as softener should be used in accordance with the manufacturer’s instructions. · Do not dry silk, wool and similar delicate clothes in the machine. Otherwise, wool clothes can shrink and damage may be caused in other delicate clothes. · Check the symbols on laundry label before washing and drying processes. · The machine automatically cleans the lint itself that comes out of the laundry during drying. The machine performs automatic water intakes for cleaning. For this reason, the water tap of the machine should also be open during drying programmes. · Prevent the lint from accumulating around the product.

EN / 10

1.8 Maintenance and Cleaning Safety
· Do not wash the product with pressure washers, by spraying vapour, water or pouring water.
· Do not use sharp or abrasive tools to clean the product. Do not use household cleaners, soap, detergent, gas, gasoline, thinner, alcohol, varnish, etc. while cleaning.
· Cleaning agents containing solvents might reek poisonous fumes( for ex. cleaning solvent. Do not use cleaning products containing solvents.

· There may be detergent residues in the detergent drawer when you open it for cleaning.
· Do not dismantle the filter of the discharge pump while the product is running.
· The temperature in the machine may rise up to 90ºC. Clean the filter after the water in the machine cools down in order to avoid risk of getting burnt.

Important Instructions for Environment

Compliance with WEEE Directive
electrical and electronic equipment. Please consult your local authorities to learn about these collection centers.

This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE). This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling. Do not dispose of the waste product with normal domestic and other wastes at the end of its service life. Take it to the collection center for the recycling of

Compliance with RoHS Directive:
The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive.
2.2 Package Information
Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.

EN / 11

Technical Specifications

Supplier’s name or commercial brand
Model name
Washing capacity (cotton) (kg) Drying capacity (cotton) (kg) Maximum spin speed (cycle/min) Built-In Height (cm) Width (cm) Depth (cm) Single Water inlet / Double Water inlet Electrical connection (V/Hz) Total current (A) Total power (W) Main model code

Beko BDFT710442WB
7178546700 10 6
1400 No 84 60 60 +/230 V / 50Hz 10 2200 1421
The model information as stored in the product database can be reached by entering following website and searching for your model identifier (*) found on energy label. https://eprel.ec.europa.eu/

The consumption values apply when wireless network connection is turned off.

EN / 12

Installation

Please read the “Safety Instructions” section first!
Your washing machine automatically detects the amount of laundry placed inside when selecting a program. While installing the product, before the first use, calibration should be done to ensure that the laundry amount is detected in the most accurate way. To do this, select the Drum Cleaning program and cancel the spin function. Start the program without laundry. Wait for the program to finish, which will take about 15 minutes. The program name may vary depending on the model. For the appropriate program selection, review the program descriptions section.
· Please contact the nearest Authorised Service for the installation of the appliance.
· Make sure that the installation and electrical connections of the product are performed by authorised service agent. Manufacturer shall not be held responsible for damages caused by operations performed by unauthorised persons.
· Preparation of the location and electrical, tap water and waste water installations at the place of installation is under customer’s responsibility.
· Make sure that the water inlet and discharge hoses as well as the power cable are not folded, pinched or crushed while pushing the product into its place after installation or cleaning procedures.
· Prior to installation, visually check if the product has any defects on it. Do not have the product installed if it is damaged. Damaged products cause risks for your safety.

4.1 Appropriate Installation Location
· Place the product on a hard and level floor. Do not place it onto a carpet with high pile or other similar surfaces. Placing on an improper floor shall cause noise and vibration problems.
· Do not place the product on the power cable.
· Do not install the product at places where temperature may fall below 0 ºC. Freezing might damage your product.
· Leave a minimum space of 1 cm between the product and the furniture.
· If you will install the product on a surface with steps, never place it close to the edge.
· Do not place the product on any platform. · There shall not be any locked, sliding or
hinged doors that may prevent the loading door from opening completely in the installation location of this product. · Do not place heat sources such as cooker, irons, ovens, heater etc. on the appliance and do not use them on the product.
4.2 Assembly of Bottom Panel Covers
· In order to increase the sound comfort of the product, attach cover A after removing the package foam.
Cover A
Tilt the machine back slightly. Rest the tabs of Cover A against the lower panel. Complete the assembly by rotating the cover. · Cover B and the Cap are optional. If
available, attach cover B and the Cap.

EN / 13

Cover B
Rest the tabs of Cover B against the lower panel. Complete the assembly by rotating the cover. Cap
Insert the cap by pushing it with your finger. 4.3 Removing Transportation
Safety Bolts a. Loosen all transportation safety bolts
with an appropriate wrench until they turn freely. b. Bend the inner part by pressing it at the grip areas and pull the part out. c. Attach the plastic covers supplied in the User Manual bag into the holes on the rear panel.
WARNING Remove the transportation safety bolts before operating the product. Otherwise, the product will get damaged.

WARNING Keep the transportation safety bolts in a safe place to reuse when the product needs to be moved again in the future. Install the transportation safety bolts in reverse order of the disassembly procedure. Never move the product without the transportation safety bolts properly fixed in place.
4.4 Connecting to Water Supply
WARNING The water pressure required for the operation of the product is between 1-10 bars (0.1-1 MPa). To ensure a smooth operation of the machine, 10 – 80 liters of water shall be supplied in a minute from a fully opened tap. If the water pressure is higher, install a pressure reducing valve.
WARNING Models with a single water inlet shall not be connected to the hot water tap. In such a case the laundry will get damaged or the product will switch to protection mode and will not operate. Do not use old or used water inlet hoses on a new product. It may cause water leakage from your machine and stain your laundry.
a. Connect the special hose supplied with the product to the water inlet on the product.
WARNING Make sure that the cold water connection is performed correctly during the installation of the product. Otherwise, your laundry may come out as hot at the end of the washing cycle and thus they may be worn.

EN / 14

b. Tighten all hose nuts by hand. Never use a tool when tightening the nuts.
c. Open the taps completely after making the hose connection to check for water leaks at the connection points. If any leak occurs, turn off the tap and remove the nut. Check the gasket and tighten the nut carefully again. In order to prevent the water leaks and resultant damages, keep the taps closed when you do not use the product.
4.5 Connecting the Drain Hose to the Drain
a. Attach the end of the drain hose directly to waste water drain, washbasin or bathtub. Your house will be flooded if the water draining hose is dislocated during water draining. There is also a risk of burning due to the high washing temperatures. In order to prevent such situations and make sure that the product performs water intake and drain processes without any problem, fix the drain hose securely.
b. Connect the hose to a minimum height of 40 cm and a maximum height of 90 cm.

c. If the hose is placed on the floor (or at a maximum height of 40 cm from the floor) and then its height is increased, discharging of water becomes difficult, and laundry may come out very wet from the machine. Thus, follow the heights provided in the figure.
d. To prevent the waste water to go back into the product again and to ensure easy drainage, do not immerse the end of the hose into the waste water or do not insert it into the drain for more than 15 cm. If it is too long, cut it short.
e. The end of the hose should not be bent, it should not be stepped on and the hose must not be pinched between the drain and the product. Otherwise, water discharge issues may emerge.
f. If the length of the hose is too short, use it by adding an original extension hose. The overall length of the hose shall not be longer than 3.2 m. To prevent water leaks, always secure the connection between the extension hose and the draining hose of the product with a suitable clamp so that it does not come off and cause leaks.
4.6 Adjusting the Stands
WARNING In order to ensure that the product operates more silently and vibration-free, it must stand level and balanced on its feet. Ensure that the product is balanced by adjusting the feet. Otherwise, the product may move from its place and cause crushing, noise and vibration problems.
a. Loosen the nuts on the feet in the direction of the arrow with the tool in the user manual bag.
b. Adjust the feet until the product stands level and balanced. You can move the feet up by turning them counter-clockwise and down by turning them clockwise.

EN / 15

c. Re-tighten all lock nuts with the tool in the direction of the arrow. You can move the nuts down by turning them counter-clockwise and up by turning them clockwise.
4.7 Electrical Connection
Connect the product to a grounded outlet protected by a 16 A fuse. Our company shall not be responsible for the damages that shall be incurred due to using the product without grounding according to local regulations. · Connection must comply with national
regulations. · The electrical connection cable infra-
structure of the product must be adequate and suitable for product requirements. It is recommended to use a Ground Fault Circuit Breaker (GFCI). · Power cable plug must be within easy reach after installation. · If the current supply to the fuse or breaker in the house is less than 16 Amps, have a qualified electrician install a 16 amp supply. · The voltage specified in the “Technical specifications” section must be equal to your mains voltage.
5 Preliminary Preparation
Please read the “Safety Instructions” section first
5.1 Sorting the Laundry
· Sort laundry according to type of fabric, colour, and degree of soiling and allowable water temperature.
· Always observe the instructions given on the garment care labels.

· Do not make connections via extension cables or multi-plugs. Overheating and burning may occur due to the connecting cable.
Damaged power cables should be replaced by the authorised service in order to prevent possible danger.
4.8 Handling the Product
a. Unplug the product before handling it.
b. Disconnect the water outlet and water main connections. 3 Drain all the water that remains in the product. See Draining Remaining Water and Cleaning the Pump Filter
c. Install the shipping bolts in reverse order of the disassembly procedure. See Removing the Shipping Bolts
Never carry the product without the shipping bolts properly attached! Your product is so heavy that it shall not be carried by one person. Your product shall be carried by two people and more care shall be taken on the stairs as it is a heavy product. If the product falls on you, it may cause injury. The packaging materials are dangerous for children. Keep packaging materials at a safe place away from the reach of children.
5.2 Preparing Laundry for Washing
· Laundry items with metal attachments such as, underwiring, belt buckles or metal buttons will damage the product. Remove the metal pieces or wash such clothes by putting them in a laundry bag or pillow case.
· Take out all substances in the pockets such as coins, pens and paper clips, and turn pockets inside out and brush. Such objects may damage the product or cause noise problem.

EN / 16

· Put small size clothes such as infant’s socks and nylon stockings in a laundry bag or pillow case.
· Place curtains in without compressing them. Remove curtain attachment items. Curtain attachment items may cause pulling and tearing on the curtain.
· Fasten zippers, sew loose buttons and mend rips and tears.
· Wash “Machine washable” or “Hand washable” labelled products only with an appropriate programme. Dry these types of clothes by hanging them or laying them flat. Do not dry them in the machine.
· Do not wash colours and whites together. New, dark coloured cottons release a lot of dye. Wash them separately.
· Only use paints / colour changing agents and descalers suitable for use in machines. Always observe the instructions on the packaging
· Tough stains must be treated properly before washing. If you are not sure, check with a dry cleaner.
· Wash trousers and delicate laundry turned inside out.
· Laundry that are subjected to materials such as flour, lime dust, milk powder, etc. intensely must be shaken off before placing into the product. Such dusts and powders on the laundry may build up on the inner parts of the product in time and can cause damage.
· Before washing laundry made of angora wool, keep them in the freezer section of the refrigerator for few hours. This will reduce pilling
5.3 Tips for Energy and Water Saving
Following information will help you use the product in an ecological and energy/waterefficient manner. · Operate the product in the highest load
capacity allowed for the programme you have selected, but do not overload. See “Programme and consumption table” · Observe the temperature instructions on the detergent packaging.

· Wash slightly soiled laundry at low temperatures.
· Use faster programmes for small quantities of lightly soiled laundry.
· Do not use prewash and high temperatures for laundry that is not heavily soiled or stained.
· If you plan to dry your laundry in a dryer, select the highest spin speed recommended during washing process.
· Do not use more detergent than the recommended on the detergent packaging.
5.4 Start Up Before starting to use the product make sure that the preparations described in section “Environmental Instructions” and “Installation”. To prepare the product for washing laundry, perform first operation in Drum Cleaning programme. If this programme is not available in your product, apply the method which is described in section “Cleaning the loading door and the drum”.
Use an anti-limescale product suitable for the washing machines Some water has remained in the product due to the quality control processes in the production. It is not harmful for the product.
5.5 Loading the Laundry
a. Open the loading door.
b. Put the laundry items into the product in a loose manner.
c. Push the loading door to close until you hear a locking sound. Ensure that no items are caught in the door. The loading door is locked while a programme is running. The door lock will open a few minutes after the washing programme has ended. Then you can open the

EN / 17

loading door. If the door does not open, apply the solutions provided for “Loading door cannot be opened” error in the Troubleshooting section.
5.6 Correct Load Capacity
The maximum load capacity depends on the type of laundry, the degree of soiling and the desired washing programme. The product automatically adjusts the water amount according to the weight of the laundry put inside it.
Follow the instructions in “Programme and consumption table”. When the appliances is overloaded product’s washing performance will drop. Moreover, noise and vibration problems may occur. For a successful drying performance, do not put more laundry in the machine than specified.
Bathrobe: 1200 g Bedding: 700 g Sheet: 500 g Pillow Case: 200 g Table Cloth: 250 g Negligee/Pyjamas: 200 g Lingerie: 100 g Shirts: 200 g Blouse: 100 g Towel: 200 g
The loading door is locked while a programme is running. The door lock will open once the programme is completed. If the inner part of the machine is very hot at the end of the program, the loading door will not open until the temperature drops. If the door does not open, apply the solutions provided for “Loading Door Cannot Be Opened” error in the Troubleshooting section.

WARNING If the laundry is placed incorrectly, noise and vibration problems may occur in the machine.
5.7 Using Detergent and Softener
WARNING Read the manufacturer instructions on the package while using detergents, softeners, starch, bleach and decolourants, anti-limescale and follow the dosage information provided. Use a measuring cup, if any.
The detergent drawer comprises of three compartments: (1) for prewash, (2) for main washing, (3) for softener, ( ) a syphon piece in the softener compartment, ( ) there is a liquid detergent apparatus for liquid detergent use in the main washing compartment. Detergent, Softener and Other Cleaning Agents · Add detergent and softener before start-
ing the washing programme. · Do not leave the detergent drawer open
when the washing programme is on. · If you are using a programme without
pre-washing, do not put detergent in the pre-wash compartment (compartment no. “1”).

EN / 18

· If you are using a program with prewash, start the machine after adding powder detergent to the prewash and main wash compartments (compartments 1 and 2).
· Do not select a programme with prewashing if you are using a detergent pod or dispensing ball. Place the detergent pod or the dispensing ball directly among the laundry in the product.
· If you are using a liquid detergent, follow the directions under “Liquid detergent use” and do not forget to bring the liquid detergent apparatus to the correct position.
· Do not add washing chemicals (Liquid detergent, Softener, etc.) while the machine is during Drying step.
Choosing the Detergent type
Detergent type to be used depends on the washing programme, fabric type and colour. · Use different detergents for coloured and
white laundry. · Wash your delicate clothes only with spe-
cial detergents (liquid detergent, wool shampoo, etc.) intended solely for delicate clothes and at suggested programmes. · When washing dark coloured clothes and quilts, it is recommended to use liquid detergent. · Wash woollens at suggested programme with special detergent made specifically for woollens. · Please review the programme descriptions part for suggested programme for different textiles. · All recommendations about detergents are valid for selectable temperature range of programmes.

· Do not exceed the recommended dosage values on the detergent packaging in order to eliminate excessive foam and poor rinsing problems, to save money and protect the environment.
· Use less amounts of detergent for fewer or less soiled laundry.
Using Softeners
Put the softener in the softener compartment of the detergent drawer. · Do not exceed the (>max<) level sign in
the softener compartment. · If the softener is not fluid, dilute with wa-
ter before placing in the softener compartment.
WARNING
Do not use liquid detergents or other materials with cleaning properties unless they are intended for use in washing machines for softening the laundry.
Using Liquid Detergents
If the Product Has a Liquid Detergent Apparatus
· Press and rotate the apparatus at where it is shown when you want to use liquid detergents. The part falling below will serve as a barrier for liquid detergent.
· Clean with water at its place or by removing from its place when it is necessary. Do not forget to place the apparatus in the main washing compartment (compartment no. “2”) after cleaning.
· The apparatus should be up if you will use a powder detergent. The fan that you would see in this position will mix the powder detergent and help it to dissolve.

Only detergents, softeners and additives suitable for washing machines should be used. Do not use soap powder.
Adjusting the Detergent Amount
The amount of detergent depends on the amount of laundry, how soiled they are and the water hardness.

EN / 19

Use of Gel and Tablet Detergents

If the detergent is fluid and there is no liquid detergent compartment in your product, place the gel detergent in the main washing detergent compartment in first water intake. If your product has a liquid detergent compartment, fill the compartment with detergent before starting the programme.
· If the gel detergent is not fluid or is in a capsule liquid tablet, place directly inside the drum before washing.
· Put the tablet detergent in the main washing compartment (compartment no. “2”) or directly inside the drum before washing.
· Tablet detergents may leave residue in the detergent compartment. If you face such residues, place the tablet detergent among the laundry in the next washes in a way that it will be at the bottom side of the drum.
· Use tablet or gel detergent without selecting the pre-wash function.
· Do not forget to remove elements such as plastic detergent compartment from the drum before drying.
Using Starch
· Put in the liquid starch, powder starch or fabric dye in the softener compartment.
· Do not use softener and starch in the same washing programme simultaneously.
· Wipe the inside of the product with a damp and clean cloth after using starch.

Using Anti-Limescale
· When necessary, only use anti-limescale produced for washing machines.
Using Bleach and Decolourants
· Select a programme with pre-washing and add bleach at the start of pre- washing. Do not put detergent in the pre-wash compartment. As an alternative application, select a programme with additional rinsing and add the bleach while the product is receiving water to the detergent compartment in the first rinsing step.
· Do not mix and use bleach and detergent together.
· As bleach may cause skin irritation use only small amounts (1/2 tea cups – approximately 50 ml and rinse the laundry well.
· Do not pour bleach directly onto the laundry.
· Do not use bleach for coloured clothes. · Select a programme with low temperat-
ure washing while using oxygen-based decolourants. · Oxygen-based decolourants can be used together with detergents. However, if it does not have the same viscosity as the detergent, first place the detergent in compartment no. “2” in the detergent drawer and wait for the product to rinse away the detergent during water intake. Add the decolourant to the same compartment while the machine continues taking in water.

Tips for Efficient Washing

Clothes

Light Colours and Whites

Colours

Black/Dark Col- Delicates/ Wool-

ours

lens/Silks

(Recommended temperat- (Recommended temper-

ure range based on soil ature range based on

level: 40-90 °C)

soil level: cool -40 °C)

(Recommended temperature range based on soil level: cool -40 °C)

(Recommended temperature range based on soil level: cool -30 °C)

EN / 20

Soiling Level

It may be necessary to Powder and liquid deter-

pre-treat the stains or per- gents recommended for

form prewash.

colours can be used at

Powder and liquid deter-

gents recommended for Heavily Soiled whites can be used at

(difficult stains such as grass, coffee, fruits and blood.)

dosages recommended for heavily soiled clothes. It is recommended to use powder detergents to clean clay and soil stains

dosages recommended for heavily soiled clothes. It is recommended to use powder detergents to clean clay and soil stains and the stains that are sensitive to bleaches. Detergents

Liquid detergents suitable for colours and black/dark colours can be used at doses recommended for heavily soiled clothes.

Prefer liquid detergents produced for delicate clothes. Woollen and silk clothes must be washed with special woollen detergents.

which do not contain de-

and the stains that are colourant should be

sensitive to bleaches.

used.

Normally Soiled

Powder and liquid detergents recommended for

(For example, whites can be used at stains caused dosages recommended by body on col- for normally soiled lars and cuffs) clothes.

Powder and liquid detergents recommended for colours can be used at dosages recommended for normally soiled clothes. Detergents which do not contain decolourant should be used.

Liquid detergents suitable for colours and black/dark colours can be used at doses recommended for moderately soiled clothes.

Prefer liquid detergents produced for delicate clothes. Woollen and silk clothes must be washed with special woollen detergents.

Lightly Soiled

Powder and liquid detergents recommended for

(No visible stains exist.)

whites can be used at dosages recommended for lightly soiled clothes.

Powder and liquid detergents recommended for colours can be used at dosages recommended for lightly soiled clothes. Detergents which do not contain decolourant should be used.

Liquid detergents suitable for colours and black/dark colours can be used at doses recommended for lightly soiled clothes.

Prefer liquid detergents produced for delicate clothes. Woollen and silk clothes must be washed with special woollen detergents.

EN / 21

5.9 Tips for Efficient Drying

Types of Clothing

Programmes

Cotton Dry

Synthetic Dry

Babyprotect+

Washing and Drying

Wash & Wear

Durable Clothes Containing Cotton

Sheets, beddings, baby clothes, tshirts, sweatshirts, durable Not Recomknitted clothes, mended! jeans, canvas pants, shirts, cotton socks etc.

It washes and It washes and Clothes such

dries consecut- dries consecut- as shirts, t-

ively! Sheets, ively! Sheets, shirts, sweat-

beddings, baby beddings, baby shirts etc. that

clothes, t-

clothes, t-

have been

shirts, sweat- shirts, sweat- worn for a

shirts, durable shirts, durable short time and

knitted clothes, knitted clothes, are unstained

jeans, canvas jeans, canvas A very small

pants, shirts, pants, shirts, amount of

cotton socks cotton socks laundry should

etc.

etc.

be loaded.

Synthetic Clothes (Polyester, nylon etc.)

Not Recommended!

It is recommended for clothes containing polyester, nylon, polyacetate, acrylic. Drying is not recommended for clothes containing viscose. Attention should be paid to the drying instructions on the maintenance label.

It is recommended for clothes containing polyester, nylon, polyacetate and acrylic at low temperatures, taking into account the washing and drying warnings indicated on the maintenance label.

It is recommended for clothes containing polyester, nylon, polyacetate and acrylic at low temperatures, taking into account the washing and drying warnings indicated on the maintenance label.

Lightly soiled and unstained shirts, t-shirts and synthetic laundry. A very small amount of laundry should be loaded.

Delicate (Con-

taining Silk,

Woolen,

Not Recom-

Cashmere, An- mended!

gora wool etc.)

Laundry

Not Recommended!

Not Recommended!

Not Recommended!

Not Recommended!

Bulky laundry such as blankets, coats, curtains etc.

Not Recommended! It is not suitable to dry bulky laundry in the washing machine. Dry these laundry by hanging them or laying them flat.

Not Recommended! It is not suitable to dry bulky laundry in the washing machine. Dry these laundry by hanging them or laying them flat.

Not Recommended! It is not suitable to dry bulky laundry in the washing machine. Dry these laundry by hanging them or laying them flat.

Not Recommended! It is not suitable to dry bulky laundry in the washing machine. Dry these laundry by hanging them or laying them flat.

Not Recommended! It is not suitable to dry bulky laundry in the washing machine. Dry these laundry by hanging them or laying them flat.

5.10 Displayed Programme Duration
You can view the programme duration on the display of your machine while selecting a programme. Depending on the amount of laundry you have loaded into your machine, foaming, unbalanced load conditions, fluctuations in power supply, water pressure

and programme settings, the programme duration is automatically adjusted while the programme is running.
SPECIAL CASE: At programme start of Cottons and Cotton Eco programmes, display shows the duration of half load. It is the most common use case. After programme starts, in 20-25 minutes actual

EN / 22

load is detected by the machine. And if the detected load is higher than half load; washing programme will be adjusted ac-
6 Operating the Product
Please read the “Safety Instructions” section first!
6.1 Control Panel

cordingly and programme duration increased automatically. You can follow this change on the display.

23

4

1

12 11 10 9 8 7 6 5

1 Programme Selection Button 3 Spin Level Indicator Lights 5 Start/Pause Button 7 End Time Setting Button 9 Auxiliary Function Button 2 11 Spin Speed Adjustment Button

2 Temperature Level Lights 4 Display 6 Remote Control Button 8 Drying Level Adjustment Button 10 Auxiliary Function Button 1 12 Temperature Setting Button

EN / 23

6.2 Symbols on the Display

1

2

3

4

5

6 7
8

17 16 15 14 13 12 11 10 9

1 Temperature Indicator 3 Duration information 5 Programme follow-up indicator 7 Add Garment Indicator 9 Remote Control Indicator 11 Drying Level Indicator 13 Auxiliary Function Indicators 2 15 No spin indicator 17 Cold Water indicator
The visuals used for machine description in this section are schematic and may not match exactly with the features of your machine.

2 Spin Speed Indicator 4 Door lock is engaged symbol 6 No Water indicator 8 Bluetooth Connection Indicator 10 Delayed Start Enabled Indicator 12 Child Lock Enabled symbol 14 Auxiliary Function Indicators 1 16 Rinse Hold Indicator
6.3 Preparing the Machine a. Check if the hoses are connected
tightly. b. Plug in your machine. c. Turn on the tap completely. d. Place the laundry inside the machine. e. Put detergent and softener.

EN / 24

Selection of Washing Program
a. Determine the programme suitable for the type, quantity and soiling level of the laundry in accordance with “Programme and consumption table”.
Programmes are limited to the highest spin speed appropriate for that particular type of fabric. When selecting a programme, always consider the type of fabric, colour, soiling level and permissible water temperature.
b. Select the desired programme with the Programme Selection knob.

Symbols shown on the display are schematic and may not match with the product one-to-one. If you do not want to perform drying process after the programme you have selected, press and hold the Drying auxiliary function button until the Drying light turns off. When washing and drying using the Drying function of your machine, load a maximum of 6 kilograms of laundry into the machine. If you load more laundry than the capacity of the machine, your laundry will not dry and the machine will run longer and consume more energy.

Washing Programmes
Use the following main programmes depending on the type of fabric.
After selecting the appropriate washing program, by pressing the Drying button before starting the program, you can set your machine to switch to the drying step (automatically or timedly) at the end of the washing program, without any pauses/interruptions. Each time you press the button, the step in which the drying process will take place is shown in the row of information and the related symbol lights up. You can see when the programme will finish on the display of the machine, according to the drying selections you will add to the washing programmes. If you want, by keeping pressing the button you can dry for the maximum time allowed.
You can take a glance at the programmes for which you can select the drying function in the Programme and Consumption tables.

WARNING
The drying function cannot be selected for the washing programme for woollen clothes.
· Eco 40-60
In the Eco 40-60 programme, you may wash normally soiled cotton laundry that are specified to be washed together at 40°C or 60°C. This programme is the standard test programme according to the EU environmentally friendly design and energy labelling regulations.
Although this programme washes longer than other washing programmes, it is more efficient in terms of energy and water consumption. Actual water temperature may be different from the stated wash temperature. When you load the machine with less laundry (e.g. ½ capacity or less), periods in programme stages may automatically get shorter. In this way, energy and water consumption would be much less.
In order to evaluate compliance with EU environmentally friendly design and energy labelling regulations, the washing and drying cycle should be run by selecting the cupboard dry function of eco 40-60 programme. The washing and drying cycle can clean normally soiled laundry declared to be washable at 40 °C or 60 °C in a single cycle and dries them so that they can be put in a cupboard immediately.

EN / 25

· Cottons
You can wash your durable cotton laundry (sheets, bedlinen, towels, bathrobes, underwear etc.) in this programme. When the quick wash function button is pressed, programme duration becomes notably shorter but effective washing performance is ensured with intense washing movements. If the quick wash function is not selected, effective washing and rinsing performance is ensured for your heavily soiled laundry.
· Synthetics
You can wash your laundry (such as shirts, blouses, synthetic/cotton blended fabrics etc.) in this programme. When the quick wash function button is pressed, the programme duration will be shortened significantly and effective washing performance is provided for your laundry that is not very dirty. If the quick wash function is not selected, effective washing and rinsing performance is ensured for your heavily soiled laundry.
· Woollens / Hand Wash
Use to wash your woollen/delicate laundry. Select the appropriate temperature complying with the tag of your clothes. Your laundry will be washed with a very gentle washing action in order not to damage the clothes.
· Down Wear
Use this programme to wash your coats, vest, jackets etc. containing feathers with a “machine-washable” label on them. Thanks to special spinning profiles, it is ensured that the water reaches the air gaps amongst the feathers.
· Spin+Drain
You can use this program to remove the water on the garment/inside the machine.
· Rinse
Use when you want to rinse or starch separately.
· Shirts
This programme is used to wash the shirts made from cotton, synthetic and synthetic blended fabrics altogether. It reduces

wrinkles. Steam is applied at the end of the programme to help the wrinkle reducing function. The special spin profile and steam applied at the end of the programme reduce the wrinkles on your shirts. When the quick wash function is selected, the Pretreatment algorithm is executed. · Apply the pre-treatment chemical on your
garments directly or add it together with the detergent in the powder detergent compartment. Thus, you can obtain the same performance as you obtain with normal washing in a much shorter period of time. Usage life of your shirts increases. Do not use pre-wash detergent if you are planning to use delay function of your machine. Prewash detergent may pour out on your clothes and cause stains.
** It is recommended to operate the cycle with no more than 6 shirts to minimize wrinkles in your shirts using this cycle. When washing more than 6 shirts, there may be differences on the wrinkle levels and humidity on shirts at the end of cycle.
· Xpress / Super Xpress
Use this programme to wash your lightly soiled or unspotted cotton clothes in a short time but not for towels or heavy cottons. The programme duration can be reduced down to 14 minutes when the quick wash function is selected. When the quick wash function is selected, maximum 2 (two) kg of laundry must be washed.
· Dark Care / Jeans
Use this programme to protect the colour of your dark-coloured garments or jeans. It performs high performance washing with special drum movement even if the temperature is low. It is recommended to use liquid detergent or woollen shampoo for dark coloured laundry. Do not wash your delicate clothes containing wool or etc.
· Mix
Use to wash your cotton and synthetic clothes together without sorting them.

EN / 26

· Lingerie You can use this programme to wash delicate garments that are suitable for hand wash and delicate women’s underwear. Small amount of garments must be washed in a washing net. Hooks, buttons etc. must be done up and zips must be zipped up. · Sports You can use this programme to wash sports and outdoors garments that contain cotton/synthetics mix and water repellent covers such as gore-tex etc. It makes sure your garments are washed gently thanks to special rotating movements. · Downloaded Program This is a special programme that allows you to download different programmes when you want to. At the start, there is a programme you can see with the HomeWhiz application as default. However, you can use the HomeWhiz application to select a programme from the predetermined programme set, and then change and use it.
If you want to use HomeWhiz feature and Remote Control function, you must select Downloaded Programme. Detailed information can be found in HomeWhiz Feature and Remote Control Function.
6.6 Temperature Selection
Whenever a new programme is selected, the recommended temperature for the programme appears on the temperature indicator. It is possible that the recommended temperature value is not the maximum temperature that can be selected for the current programme.

Press the Temperature Adjustment button to change the temperature. Temperature decreases gradually.
Temperature Adjustment button only works backwards. For example, if you want to select 60°C while 40°C is written on the display, you need to press the button several times until you reach 60°C, going backwards from 40°C. If you go to Cold Wash option and press Temperature Adjustment button again, the recommended maximum temperature for the selected programme will be displayed. Press the Temperature Adjustment button again to decrease the temperature.
Finally, the Cold light that indicates cold washing illuminates on the display. You can also change the temperature after the washing starts. You can also change the desired temperature after the washing programme starts. However, you need to do this before the heating phase starts.
6.7 Spin Speed Selection
Whenever a new programme is selected, the recommended spin speed of the selected programme is displayed on the Spin Speed indicator. It is possible that the recommended spin speed value is not the maximum spin speed that can be selected for the current programme. Press the Spin Speed Adjustment button to change the spin speed. Spin speed decreases gradually. Then, depending on the model of the
product, “Rinse Hold ” and “No Spin
” options appear on the display.

EN / 27

Spin Speed Adjustment button only works backwards. For example, if you want to select 1000 rpm while 800 rpm (cycle/min) is written on the display, you need to press the button several times until you reach 1000 rpm, going backwards from 800 rpm.
If you are not going to unload your laundry immediately after the programme completes, you can use Rinse Hold function in order to prevent them from getting wrinkled when there is no water in the machine.
This function holds the laundry in the final rinsing water. If you want to spin your laundry after the Rinse Hold function:
a. Adjust the Spin Speed.
b. Press Start / Pause. The programme will resume. Machine drains the water and spins the laundry.
If you want to drain the water at the end of the programme without spinning, use No Spin function.
No change can be made in programmes where spin speed adjustment is not allowed.
You can change the spin speed after the washing starts if the washing steps allow it. Changes cannot be made if the steps do not allow it.
Auxiliary function selection for drying:

In programmes that do not allow the drying setting, when the Drying auxiliary function button is pressed, the drying light will not change and a warning noise will be heard. For only drying programmes, set the appropriate drying option by pressing the Auxiliary Function Selection button.
6.8 Drying Programmes
WARNING The machine automatically cleans the lint that from the laundry during drying programme. The machine uses water during drying. For this reason, the water tap of the machine should also be open during drying programmes. When you select a new washing program, press the Auxiliary Function Selection button to set the drying option suitable for this program.
In drying programmes, there is a spinning step. Your machine performs this process in order to shorten the drying duration. When the drying programme is selected, the spin speed setting is in the range of Maximum spin speed. In programmes that do not allow the drying setting, when the Drying auxiliary function button is pressed, the drying light will not change and a warning noise will be heard. For only drying programmes, set the appropriate drying option by pressing the Auxiliary Function Selection button.

In case of water outage, washing and drying cannot be performed.

When you select a new washing program, press the Auxiliary Function Selection button to set the drying option suitable for this program.

· Synthetic Dry Use this programme to dry synthetic laundry with a dry weight of up to 4 kilograms. You can only dry in this programme.
For the dry weight of the laundry, see Correct Load Capacity

EN / 28

· Cotton Dry Use this programme to dry cotton laundry with a dry weight of up to 6 kilograms. You can only dry in this programme.
When you will dry laundry consisting of towels and bathrobes only, load a maximum of 4,5 kilograms of laundry. For the dry weight of the laundry, see Correct Load Capacity
6.9 Washing and Drying Programmes
· 6 Kg Wash & Dry Use this programme to dry up to 6 kg of cotton laundry right after the washing programme, without making any other selections.
External Drying auxiliary function cannot be selected while this programme is selected.
In the 6 kg Washing and 6 kg Drying programme, it is recommended to fill the machine to the level shown in the figure above for ideal drying conditions (you can see the level arrow when you open the loading door). · Wash & Wear Use this programme to wash 0.5 kg of laundry (2 shirts) in 40 minutes or to wash 1 kg of laundry (5 shirts) in 60 minutes.

Clean and Wear programme is designed to quickly wash and dry daily clothes that have been worn for a short time and are not heavily contaminated. This programme is suitable for fine-textured and quickdrying laundry (shirts, t-shirts). For thick textured laundry that takes longer to dry, other drying options or programmes should be used.
· Hygiene+ Wash & Dry A steam step applied at the beginning of the program helps to soften the dirt. Use this programme to wash and quickly dry laundry weighing up to 2 kilograms, requiring anti-allergic and hygienic washing (cotton laundry such as baby clothes, sheets, lingerie).
The Baby+ programme has been tested and approved by the “British Allergy Foundation” (Allergy UK) located in the United Kingdom.
· HygieneTherapy Hygienic washing with hot air (programme duration 58 min.)
The hygienic ventilation programme ensures that the temperature of the laundry is kept at relatively high temperatures with a precise heating method and hygienic cleaning is performed via air. Use this programme for fast hygienic cleaning of your cotton or synthetic dry clothes with hot air.
Hygienic Ventilation programme does not use water. Use this programme for clothes you want to clean by ventilation. WARNING: Do not put chemicals such as detergents, bleach, stain remover, etc. in the detergent drawer in the hygienic ventilation programme. No pre-treatment to laundry is required before turning on the programme.

EN / 29

Refreshing with hot air (48 min. and 38 min.)

The default duration is 58 minutes if you select the “Hygienic Ventilation” programme. With “Quick+” auxiliary function you can select different programme durations such as 48 minutes and 38 minutes.

6.10 Programme and Consumption Table

For washing:

Auxiliary Functions

Temperature °C
Max. Load (kg)
Water Consumption (l) Energy Consumption
(kWh) Max. Speed Steam Fast+ Prewash Anti-Crease+ Drying

Programme

Temperature °C

90 10 98 2,75 1400 · · · · ·

Cold – 90

Cottons

60 10 98 2,00 1400 · · · · ·

Cold – 90

40 10 95 1,10 1400 · · · · ·

Cold – 90

40 ***

10

65 0,990 1400

·

40-60

Eco 40-60

40 ***

5

44 0,800 1400

·

40-60

40 ***

2,5

36

0,400 1400

·

40-60

Eco 40-60 + Cupboard Dry

40 ***

6

60 3,695 1400

40 ***

3

43 2,095 1400

·

40-60

·

40-60

Synthetics

60 4 76 1,60 1200 · · · · · 40 4 74 1,10 1200 · · · · ·

Cold – 60 Cold – 60

90 10 75 2,30 1400 · ·

··

Cold – 90

Xpress / Super Xpress

60 10 75 1,30 1400 · ·

··

Cold – 90

30 10 75 0,25 1400 · ·

··

Cold – 90

Xpress / Super Xpress + Fast+ 30 2 45 0,15 1400 · ·

··

Cold – 90

Woollens / Hand Wash

40 2 60 0,60 1200

Cold – 40

Shirts

60 4 70 1,40 800 * · · · ·

Cold – 60

Drum Cleaning+

90 – 80 2,60 600 *

90

Downloaded Program

Mix

40 4 83 1,10 800 · · · · ·

Cold – 40

Sports

40 5 60 0,65 1200

·

·

Cold – 40

Dark Care / Jeans

40 5 86 1,05 1200 · · · · ·

Cold – 40

Down Wear

60 – 100 1,60 800 ·

Cold – 60

Lingerie

30 1 78 0,30 600

Cold – 30

· : Selectable.

• : Automatically selected, cannot be cancelled.

*** : Eco 40-60 programme is a test programme according to 40 ° C temperature selection, EU regulation EU / 2019/2014 and EN 60456: 2016 / A11: 2020 standard.

EN / 30

Selection of 40 °C temperature and cupboard dry in the Eco 40-60 programme is a washing and drying cycle test programme as per EU/2019/2014 EU regulation and EN 62512.
***** : These programmes can be used with the HomeWhiz application. Energy consumption may increase due to connection.
– : See the programme description for maximum load.
Please read Installation section of the manual before first use. The auxiliary functions in the table may vary according to the model of your machine. Water and energy consumption may vary subject to the changes in water pressure, water hardness and temperature, ambient temperature, type and amount of laundry, selection of auxiliary functions and spin speed, and changes in electric voltage. Selection patterns for auxiliary functions can be changed by the manufacturer company. New selection patterns can be added or removed. The spin speed of your machine may vary according to the programme; this spin speed cannot exceed the max. spin speed of your machine. The amount of noise and humidity varies according to the spin speed; when the higher spin speed is selected during the spinning phase, the laundry contains less moisture but higher noise occurs at the end of the programme.

You can see the washing duration on the display of your machine while selecting a programme. Depending on the amount of laundry you have loaded into your machine, there may be a difference of 1-1.5 hours between the duration shown on the display and the actual duration of the wash cycle. Duration will be automatically updated soon after the washing starts. Always select the lowest appropriate temperature. The most efficient programmes in terms of energy consumption are generally those that wash at low temperatures for a long time.

EN / 31

For drying:

Auxiliary Functions

Drying Level

Max. Load (kg) Water Consumption (l) Energy Consumption (kWh) Max. Speed Steam Prewash Fast+ Anti-Crease+ Drying Extra Dry Cupboard Dry Iron Dry Time Based Drying – minute

Programme

Temperature Selection °C

Cotton Dry Synthetic Dry Hygiene+ Wash & Dry 6 Kg Wash & Dry Wash & Wear Wash & Wear HygieneTherapy

–

6

50 3,90 1400

–

4

35 2,50 –

60

2 120 3,80 1400 *

60

6 115 6,00 1400

30 0,5 35 0,60 1200

30

1

44 1,00 1200

–

2

1 0,50 –

·*····

–

·*

···

–

· * · · · · 90-30

· * · · · · 60-Cold

· ·

· 30-Cold · 30-Cold

··*

–

Consumption Values (EN)

Temperature Selection °C

Spin Speed Capacity (cycle/min) (kg)

Programme Duration (h:min)

Energy Consumption (kWh/ cycle)

Water Con- Laundry sumption Temperat(liter/cycle) ure (°C)

Residual Moisture Percent (%)

40

1400

10

03:58

0,990

65

Eco 40-60

40

1400

5

02:59

0,800

44

36

53,9

39

53,9

40

1400

2,5

02:59

0,400

36

Cottons

20

1400

10

04:00

0,750

95

Cottons

60

1400

10

04:00

2,000

98

Synthetics

40

1200

4

02:35

1,100

74

Xpress / Super Xpress

30

1400

10

00:28

0,250

75

24

53,9

20

53,9

60

53,9

40

40

23

62

Eco 40-60

40

1400

6

09:30

3,695

60

+ Cupboard

Dry

40

1400

3

06:50

2,095

43

24

53,9

23

53,9

The consumption values given for programmes other than the Eco 40-60 programme for washing and drying online are only indicative.

6.11 Auxiliary Function Selection

Select the desired auxiliary functions before starting the programme. Whenever a programme is selected, icons of the auxiliary function symbol that is selected together with it illuminates.

EN / 32

When an auxiliary function button that cannot be selected with the current programme is pressed, the washing machine will make a warning sound. Some functions cannot be selected together. If a second auxiliary function conflicting with the first one is selected before starting the machine, the function selected first will be cancelled and the second auxiliary function selection will remain active. For example, if you want to select Quick Wash after you have selected the Additional Water, Additional Water will be cancelled and Quick Wash will remain active. An auxiliary function that is not compatible with the programme cannot be selected. (See “Programme and consumption table”) Some programmes have auxiliary functions that must be operated simultaneously. Those functions cannot be cancelled. The frame of the auxiliary function will not be illuminated, only inner area will be illuminated.
If the selected wetness level (Iron Dry, Cupboard Dry, Cupboard Extra Dry) cannot be reached at the end of the drying programme, your machine automatically extends the programme duration. The programme takes longer. If Timed Drying is selected, the programme finishes at the end of the drying duration even if the laundry has not dried. During the drying programme, if the selected wetness level (Iron Dry, Cupboard Dry, Cupboard Extra Dry) is reached or extra dryness is detected in the timed drying options, the programme will take a shorter time. The time shortening is shown on the display.

6.11.1 Auxiliary Functions
· Prewash
A Prewash is only worthwhile for heavily soiled laundry. Not using the Prewash will save energy, water, detergent and time.
· Fast+
After selecting a programme, you can press the Quick Wash setting button to shorten the programme duration. For some programmes, the duration can shorten by over 50%. Despite this, a good washing performance is achieved thanks to the changed algorithm. While it differs with each programme, when you press the Quick Wash button once, the programme duration will drop to a certain level. If you press the same button for the second time, it will drop to the minimum duration. Do not use Quick Wash adjustment button when washing heavily soiled laundry for a better washing performance. Use the Quick Wash button for Mildly and Lightly soiled laundry and shorten the programme duration.
· Remote Control You can use this auxiliary function button to connect your product to smart devices. For detailed information, see HomeWhiz Feature and Remote Control Function.
· Customized Programme
This auxiliary function can only be used for Cotton and Synthetic programmes together with the HomeWhiz application. When this auxiliary function is activated, you can add up to 5 auxiliary rinsing steps to the programme. You can select and use some auxiliary functions even though they are not found on your product. You can increase and decrease the time of the Cotton and Synthetic programmes within a safe range.
When the Specialised Programme auxiliary function is selected, the washing performance and energy consumption will be different than the declared value.

EN / 33

· Drying This function allows the laundry to dry after washing. Check in the programme table with which programmes this auxiliary function can be selected.
6.11.2 Functions/Programmes Selected by Pressing the Function Keys for 3 Seconds
· Drum Cleaning+ Press and hold the related auxiliary function button for 3 seconds to select the programme. Regularly clean (once every 1 to 2 months) the drum for ensuring the required hygiene. Steam is applied before the programme to soften the residues in the drum. Turn on the programme when the machine is completely empty. For more effective results, place powder anti- limescale (drum cleaning materials) suitable for washing machines inside the detergent compartment “2”. There is a drying step after drum cleaning in this programme for the inside of the drum to dry.
This is not a washing programme. This is a maintenance programme. Do not turn this programme on when there is something inside the machine. When you attempt to operate, the machine automatically senses that there is load inside, and may quit or resume the programme as per the model of your machine. An effective cleaning is not achieved if the programme is resumed.
· Anti-Crease+ This function is selected when the relevant Auxiliary function button is pressed and held for 3 seconds and the programme follow-up light for the relevant step turns on. When selected, it aerates the laundry for up to 8 hours at the end of the programme to prevent creasing. You can cancel the programme and take your laundry out at any time during the 8-hour duration. Press the function selection key or the machine on/off

key to cancel the function. The programme follow-up light will remain on until the function is cancelled or the step is complete. If the function is not cancelled, it will be active in the subsequent washing cycles as well.
· Steam This function can be selected by pressing and holding the related auxiliary function button for 3 seconds. This function helps to reduce the creases of your cotton, synthetic and mixed clothes, shorten the ironing time and remove the dirt by softening. *Your laundry may be hotter at the end of the washing cycle when the steam function is applied at the end of the programme. This is an expected condition within the operating conditions of the programme.
· Child Lock Use Child Lock function to prevent children from tampering with the machine. Thus you can avoid any changes in a running programme.
You can switch on and off the machine with On / Off button when the Child Lock is active. When you switch on the machine again, programme will resume from where it has stopped. When the Child Lock is enabled, an audio warning will be given if the buttons are pressed. Audio warning will be cancelled if the buttons are pressed five times consecutively.
To activate the child lock:
Press and hold Drying Level Adjustment button for 3 seconds. After the countdown as “CL 3-2-1” on the display is over, “CL On” (Child Lock On) symbol appears on the display. You may release the Drying Level Adjustment button when this symbol is displayed.

EN / 34

To deactivate the child lock:
Press and hold Drying Level Adjustment button for 3 seconds. After the countdown “CL 3-2-1” on the display is over, “CL Off” (Child Lock Off) symbol appears on the display.
· Bluetooth You can use the bluetooth connection function to pair your machine with your smart device. This way, you can use your smart device to get information about your machine and control it. To activate bluetooth connection:
Press and hold Remote Control function button for 3 seconds. Countdown “3-2-1” will be displayed, and then Bluetooth icon will appear on the display. Release Remote Control function button. The bluetooth icon will flash while the product is pairing with smart device. If connection is successful, icon will remain on.
To deactivate bluetooth connection: Press and hold Remote Control function button for 3 seconds. Countdown “3-2-1” will be displayed, and then Bluetooth icon will disappears on the display.
First setup of the HomeWhiz application must be complete for the bluetooth connection to be activated. After setup, pressing the remote control function button while the knob is at Download Programme/Remote Control position will automatically activate the bluetooth connection.
6.12 Drying Steps

Iron Dry Drying is performed until the Iron Dry step is reached at the drying level.
Cupboard Dry Drying is performed until the Cupboard Dry step is reached at the drying level.
Extra Dry Drying is performed until the Cupboard Extra Dry step is reached at the drying level.
The dryness level may vary depending on the laundry mixing and material type as well as amount and wetness level. Clothes containing lace, tulle, stone, beads, sequins, wires etc. and laundry with high silk content should not be dried in the machine.
Time Based Drying ­ minute To achieve the desired dryness level at a low temperature, you can choose from drying durations of 30, 90 and 150 minutes. When drying a small amount of laundry (maximum 2 items), the timed drying steps in Cotton or Synthetic drying programmes should be selected. If the laundry is not at the desired dryness level at the end of the drying programme, timed drying can be selected to finish the process. When this function is selected, the machine performs drying for the set time regardless of the drying level.

End Time

Time display
When the end time function is selected, the remaining time until the programme starts is shown in hours such as 1h, 2h, and the remaining time to complete the programme after your programme starts is shown in hours and minutes as in the 01:30 example.

EN / 35

Programme duration may differ from the values in section “Programme and consumption table” depending on the water pressure, water hardness and temperature, ambient temperature, amount and the type of laundry, auxiliary functions selected and the changes at the mains voltage. With the End Time function, the end time of the programme may be set up to 24 hours. After pressing End Time button, the programme’s estimated ending time is displayed. If the End Time is set, End Time indicator is illuminated.
In order for the End Time function is activated and the programme is completed at the end of the specified time, you must press Start/Pause button after adjusting the time.

c. Set the End Time of your choice by pressing the End Time button. End Time indicator lights.
d. Press Start / Pause. Time countdown starts.
Additional laundry can be added into the machine during the End Time countdown. At the end of the countdown, End Time indicator turns off, washing cycle starts and the time of the selected programme appears on the display. The door remains locked during the End Time countdown. To unlock the door, you need to put the machine in pause mode by pressing the programme start/pause button. At the end of the countdown, End Time indicator turns off, washing cycle starts and the duration of the selected programme appears on the display. When the End Time selection is completed, the time appearing on the display consists of end time plus the duration of the selected programme.

Starting the Programme

If you want to cancel End Time function, press On/Off button to turn off and on the machine.
When you have activated the End Time function, do not add liquid detergent in the powder detergent compartment no 2. There is the risk of staining of the clothes
a. Open the loading door, place the laundry and put detergent, etc.
b. Select the washing programme, temperature, spin speed and, if required, the auxiliary functions.

a. Start the programme by pressing the Start/Pause button.
b. The flashing light of Start/Pause button starts to illuminate steadily, indicating that the programme has started.
c. Loading door is locked. “Locking Door” expression appears on the display while the door is being locked.

EN / 36

Loading Door Lock
There is a locking system on the loading door of the machine that prevents opening of the loading door in cases when the water level is unsuitable. “Door Locked” symbol appears on the display when the loading door is locked.

If the Remote Control Function is selected, the door will be locked. In order to open the door you must deactivate Remote Start Function by either pressing the Remote Start button or changing the programme position.
Opening the loading door in case of power failure:
In case of a power failure, you can use the loading door emergency handle under the pump filter lid to manually open the loading door.
Before opening the loading door, make sure that there is no water in the machine to avoid flooding.
a. Turn off and unplug the appliance.
b. Open the pump filter lid.

6.16 Changing the Selections After Programme has Started
Adding Laundry after the Programme has Started : If the water level in the machine is suitable when you press Start/Pause button, the door lock will be deactivated and the door will open, allowing you to add garments. The door lock icon on the display goes off when the door lock is deactivated. After adding garments, close the door and press Start/Pause button once again to resume the washing cycle.
If the water level in the machine is not suitable when you press Start/Pause button, the door lock cannot be deactivated and the door lock icon on the display remains on.

c. Pull down the loading door emergency handle with a tool and release. Then open the loading door.
d. If the loading door does not open then repeat the previous step.
EN / 37

If the temperature of the water inside the machine is above 50°C, you cannot deactivate the door lock for safety reasons, even if the water level is suitable.

Switching the machine to pause mode: Press the Start/Pause button to switch the machine to pause mode. Pause symbol will flash on the display.
Changing the programme selection after programme has started: The programme change is allowed when the current programme is running unless the Child Lock is enabled. This action will cancel the current programme.
The selected programme starts anew.
Changing the auxiliary function, speed and temperature: Depending on the step the programme has reached, you can cancel or activate the auxiliary functions. See “Auxiliary function selection” You can also change the speed and temperature settings. See `’Spin speed selection” and “Temperature selection”.
The loading door will not open if the water temperature in the machine is high or the water level is above the loading door baseline.
6.17 Cancelling the Programme The programme is cancelled when programme selection knob is turned to a different programme or machine is turned off and on again using the programme selection knob.

If you turn the programme selection knob when the Child Lock is enabled, the programme will not be cancelled. You should cancel the Child Lock first. If you want to open the loading door after you have cancelled the programme but it is not possible to open the loading door since the water level in the machine is above the loading door baseline, then turn the Programme Selection knob to Pump+Spin programme and drain the water in the machine.
6.18 End of Programme
End symbol appears on the display when the programme is completed. If you do not press any button for 10 minutes, the machine will switch to OFF mode. Display and all indicators are turned off. Completed programme steps will be displayed if you press any button.
6.19 Standby Mode
Your machine has the “Standby Mode” feature. After turning the machine on with the On/ Off button, if no programme is started or no other action is taken during the selection phase, or if nothing is performed within approximately 2 minutes after the selected programme is over, the machine automatically switches to energy saving mode. Furthermore, if your product has a display that shows the programme time, this display is completely turned off. If you turn the programme selection button or touch any button, the lights are illuminated and the screen will turn on again. The choices you make when exiting the energy saving state may change. Check your selections’ accuracy before starting the programme. Adjust your settings again if necessary. This is not an error.

EN / 38

HomeWhiz Feature and Remote Control Function
HomeWhiz allows you to use your smart device to check your washing machine and get information about its status. With HomeWhiz application you can use your smart device to perform various procedures that can also be performed on the machine. Plus, you can use some features only with the HomeWhiz function.
You must download the HomeWhiz application from the app store of your smart device to use the bluetooth feature of your machine.
Make sure that your smart device is connected to internet to install the app.
If you are using the app for the first time, please follow the on-screen instructions to complete your user account registration. Once the registration procedure is complete, you can use all products with the HomeWhiz feature in your house on this account.
You can touch the “Appliances” tab in the HomeWhiz application to view appliances paired with your account. Following the installation of the application, HomeWhiz function enables the washing machine to send you instant notifications via your smart appliance.

In order to use the HomeWhiz function, the application must be installed on your smart appliance, and your washing machine must be paired with your smart appliance via Bluetooth. If your washing machine is not paired with your smart appliance, it will work like an appliance without HomeWhiz feature. Your product will work when it is paired with your smart appliance via Bluetooth. Controls that have been made through the application will be activated with this pairing. Therefore, the strength of the Bluetooth signal between the product and the smart appliance should be sufficient. Please visit www.homewhiz.com link to learn which Android and IOS versions are supported by HomeWhiz application.
All safety measures described in the “GENERAL SAFETY INSTRUCTIONS” titled section of the user manual are also valid for remote operation with HomeWhiz function
6.20.1 HomeWhiz Setup
In order for the application to run, a connection between your appliance and the HomeWhiz Application must be established. For this connection to be established you must follow the steps below for setup procedure on both the appliance and the HomeWhiz Application.
a. If you are adding a device for the first time, touch “Appliances” tab on the HomeWhiz Application. Select “ADD APPLIANCE” (touch here for setting up a new appliance) button in the upper right corner. Perform the setup by following both the steps below and the steps in the HomeWhiz Application.
b. To start the setup, make sure that your machine is turned off. Press and hold the Temperature button and the Remote

EN / 39

Control Function button simultaneously for 3 seconds to switch your machine to HomeWhiz setup mode.
c. When the appliance is in HomeWhiz setup mode, you will see an animation on the display and the bluetooth icon will flash until your machine gets paired with smart device. Only programme knob will be active in this mode. Other buttons will be inactive.
d. Follow the instructions in display of HomeWhiz application.
e. Wait until the installation is complete. When setup is complete, give your washing machine a name. Now, you can tap and see the product you have added in the HomeWhiz Aplication.

Your washing machine will automatically turn off if you cannot realize the setup successfully within 5 minutes. In this case, you have to start the setup process all over again. If the problem continues, please contact the Authorised Service. You can use your washing machine with more than one smart device. To do this, download the HomeWhiz app on the other smart device as well. When you launch the app, you will need to log in with the account you previously created and paired your washing machine. Otherwise, please read “Setting up a washing machine that is connected to someone else’s account”.
You need internet connection on your smart device to proceed with HomeWhiz setup. Otherwise, the HomeWhiz application will not let you finish the setup procedure successfully. Please contact your internet service provider if you are having problems with your internet connection.

HomeWhiz Application may require you to type the product number shown on the product label. You can find the product label inside of the appliance door. The product number is located on this label.

EN / 40

6.20.2 Setting up a Washing Machine Connected to Someone Else’s Account
If the washing machine that you want to use has been previously registered to the system with someone else’s account, you need to establish a new connection between your HomeWhiz App and the appliance.
a. Download HomeWhiz Application on the new smart device you want to use.
b. Create a new account and log in to this account on the HomeWhiz app.
c. Follow the steps described in HomeWhiz Setup (HomeWhiz Setup) and proceed with the setup procedure.
Since the HomeWhiz Feature and Remote Control function on your appliance is operated via pairing using Bluetooth technology only one Homewhiz application can operate it at a time.
6.20.3 Remote Control Function and Using It
After HomeWhiz setup, bluetooth will automatically turn on. To activate or deactivate the Bluetooth connection, please see “Bluetooth 3”. If you turn off and on your machine while bluetooth is active, it will automatically reconnect. In cases such as paired device going off the range, bluetooth will automatically turn off. For this reason, you will need to turn on the bluetooth again if you want to use the Remote Control function. You can check the bluetooth symbol on the display to track your connection status. If the symbol is continuously on, you have bluetooth connection. If the symbol is flashing, the product is trying to connect. If the symbol is off, you have no connection.

WARNING If the Bluetooth connection is turned on in your product, then the Remote Control function can be selected. If the Remote Control function cannot be selected, check the connection status. If the connection cannot be established, repeat the initial setup steps over the product. For safety reasons, the product door will be locked and remain locked regardless of the operating mode of the product when the Remote Control function is activated. If you want to open the door of the product, you will need to turn the programme selection knob or press the remote control key to deactivate the remote control function.
When you want to control your washing machine remotely, after the front lid is closed, you need to activate the Remote Control function by pressing the Remote Control button while the programme knob is in the Download Programme/Remote Control position button on the control panel of your washing machine. Once access is established to the product, you will see a screen similar to the one below.
When the Remote Control is enabled, you can only manage the machine, turn it off and follow the status through your washing machine. And all functions except child lock can be managed through the application. You can follow whether the Remote Control function is On or Off through the function indicator on the button. If the Remote Control function is Off, all the operations are handled on the washing machine and only status follow-up is allowed on the application. In the event that Remote Start function cannot be turned on, appliance will make a warning sound when you press the button.

EN / 41

This might happen in cases such as when the appliance is turned on and there is no paired smart device via bluetooth. Bluetooth settings being Off or the washing machine’s door being open are examples for such cases. Once you activate this function on the washing machine, it will remain enabled apart from certain conditions and allow you to control your washing machine remotely via bluetooth. In certain cases, it deactivates itself for safety reasons: · When your washing machine undergoes
a power interruption. · When programme knob is turned and a
different programme selected or appliance is turned off.
7 Maintenance and Cleaning

Troubleshooting

Do the following if you have a problem with controlling or connection. Observe whether the problem persists or not after the action you have performed.
a. Check whether your smart device is connected to the relevant home network.
b. Restart the product application.
c. Turn bluetooth off and then on via user control panel.
d. If the connection cannot be established with the above processes, repeat the initial set-up settings on the washing machine.
If the problem persists, consult an Authorised Service Agent.

Please read the “Safety Instructions” section first!
Service life of your product extends and frequently experienced problems will be reduced if it is cleaned at regular intervals.
7.1 Cleaning the Detergent Drawer
Clean the detergent drawer at regular intervals (once every 4 to 5 wash) as mentioned below to prevent accumulation of powder detergent. Clean the syphon if excess amounts of water and fabric softener mixture remains in the softener compartment.

b. Lift and remove the syphon from behind as shown.
c. Rinse drawer and syphon in the sink with plenty of warm water. Use gloves or suitable brush to prevent contact of residues in the drawer with your skin.
d. Firmly fit the syphon and the drawer back after cleaning.
7.2 Cleaning the Loading Door and the Drum
For products with drum cleaning programme, please see the Operating the product section.
Repeat Drum Cleaning process in every 2 months. NOTICE: Use an anti-limescale suitable for the washing machines.

a. Press the marked part of the syphon within the softener compartment and then pull the drawer towards yourself to take it out.
EN / 42

filters prevent foreign substances and dirt in the water to enter the product. Filters should be cleaned if they are dirty.

After every washing make sure that no foreign substance is left in the product. If the holes on the door gasket shown in the figure is blocked, open the holes using a toothpick. Foreign metal substances will cause rust stains in the drum. Clean the stains on the drum surface by using cleaning agents for stainless steel. Never use steel wool or wire wool. These will damage the painted, chrome coated and plastic surfaces. We recommend you to wipe the door gasket with a dry and clean cloth at the end of the programme. This will remove residues on the door gasket in your machine and prevent formation of malodours.
7.3 Cleaning the Body and Control Panel
Wipe the body of the product with soapy water or non-corrosive mild gel detergents as necessary, and dry with a soft cloth. Use only a soft and damp cloth to clean the control panel. Do not use cleaning products that contain bleach
7.4 Cleaning the Water Intake Filters
There is a filter at the end of each water intake valve at the rear of the product and also at the end of each water intake hose where they are connected to the tap. These

a. Close the taps.
b. Remove the nuts of the water intake hoses to access the filters on the water intake valves and clean them with an appropriate brush. If the filters are too dirty, remove them from their places with a pliers and clean in this way.
c. Take out the filters on the flat ends of the water intake hoses together with the gaskets and clean thoroughly under running water.
d. Replace the gaskets and filters carefully and tighten their nuts by hand.
7.5 Draining Remaining Water and Cleaning the Pump Filter
The filter system in your product prevents solid items such as buttons, coins and fabric fibres clogging the pump impeller during draining of washing water. Thus, the water will be drained without any problem and the service life of the pump will extend. If the product fails to drain water inside it, the pump filter is clogged. Filter must be cleaned whenever it is clogged or in every 3 months. Water must be drained off first to clean the pump filter. In addition, prior to transporting the product (e.g., when moving to another house) water should be drained completely.

EN / 43

NOTICE: Foreign substances left in the pump filter may damage your product or may cause noise problem. In regions where freezing is possible, the tap must be closed, system hose must be removed and the water inside the product must be drained when the product is not in use. After each use, turn off the tap to which the mains hose is connected.
In order to clean the dirty filter and drain the water:
a. Unplug the product to cut off the supply power.
Temperature of the water inside the product may rise up to 90 ºC. To avoid the risk of scalding, clean the filter after the water inside the product is cooled down.
b. Open the filter cover.

c. Follow the below procedures in order to drain water.
If the product does not have an emergency water draining hose, in order to drain the water:
· Place a large container at the end of the hose to collect the water from the filter.
· When the pump filter starts leaking water loosen it by turning (opposite clockwise). Fill the running water to the container you placed in front of the filter. Keep a cloth ready to clean the water that may spill.
· Completely turn and remove the pump filter when the water in the product leaks out.
a. Clean any residues inside the filter as well as fibres, if any, around the pump impeller region.
b. Replace the filter.
c. If the filter cap is composed of two pieces, close the filter cap by pressing on the tab. If it is one piece, seat the tabs in the lower part into their places first, and then press the upper part to close.

8 Troubleshooting
Please read the “Safety Instructions” section first!
Programmes do not start after the loading door is closed. · Start / Pause / Cancel button is not
pressed. >>> Press Start / Pause / Cancel button. · It may be difficult to close the loading door in case of excessive loading. >>> Reduce the amount of laundry and make sure that the loading door is closed properly.

Programme cannot be started or selected.
· The product has switched to self-protection mode due to a supply problem (line voltage, water pressure, etc.). >>> Depending on the product model, select another program by turning the Program Selection button or pressing and holding the On/Off button for 3 seconds to cancel the program. Previous programme will be cancelled. See Cancelling the Programme [} 38]

EN / 44

Water inside the product.
· Some water has remained in the product due to the quality control processes in the production. >>> This is not a failure; water is not harmful to the product.
The product does not take water in.
· Tap is turned off. >>> Turn on the taps. · Water inlet hose is bent. >>> Flatten the
hose. · Water inlet filter is clogged. >>> Clean
the filter. · Loading door is not closed. >>> Close
the door.
The product does not drain water.
· Water drain hose is clogged or twisted. >>> Clean or flatten the hose.
· Pump filter is clogged. >>> Clean the pump filter.
Product vibrates or makes noise.
· Product is standing unbalanced. >>> Adjust the stands to balance the product.
· A hard substance has entered into the pump filter. >>> Clean the pump filter.
· Transportation safety bolts are not removed. >>> Remove the transportation safety bolts.
· Laundry quantity in the product is too little. >>> Add more laundry to the product.
· Excessive laundry is loaded in the product. >>> Take out some of the laundry from the product or distribute the load by hand to balance it homogeneously in the product.
· Product is leaning on a rigid item. >>> Make sure that the product is not leaning on anything.
There is water leaking from the bottom of the product.
· Water drain hose is clogged or twisted. >>> Clean or flatten the hose.
· Pump filter is clogged. >>> Clean the pump filter.
Product stopped shortly after the programme started.
· Machine has stopped temporarily due to low voltage. >>> Product will resume running when the voltage restores to the normal level.

Product directly drains the water it takes in.
· Draining hose is not at adequate height. >>> Connect the water draining hose as described in the user manual.
No water can be seen in the product during washing.
· Water is inside the invisible part of the product. >>> This is not a failure.
Loading door cannot be opened.
· Loading door lock is activated because of the water level in the product.

Drain the water by running the Pump or Spin programme.
· Product is heating up the water or it is at the spinning cycle. >>> Wait until the programme completes.
· Loading door may be stuck because of the pressure it is subjected to. >>> Grab the handle and push and pull the loading door to release and open it.
· If there is no power, loading door of the product will not open. >>> To open the loading door, open the pump filter cap and pull down the emergency handle positioned at the rear side of the said cap. See Loading Door Lock [} 37] Washing takes longer than specified in the user manual. (*)
· Water pressure is low. >>> Product waits until taking in adequate amount of water to prevent poor washing quality due to the decreased amount of water. Therefore, the washing time extends.
· Voltage is low. >>> Washing time is prolonged to avoid poor washing results when the supply voltage is low.
· Input temperature of water is low. >>> Required time to heat up the water extends in cold seasons. Also, washing time can be lengthened to avoid poor washing results.
· Number of rinses and/or amount of rinsing water have increased. >>> Product increases the amount of rinsing water when good rinsing is needed and adds an extra rinsing step if necessary.

EN / 45

· Excessive foam has occurred and automatic foam absorption system has been activated due to too much detergent usage. >>> Use recommended amount of detergent.
Programme duration does not countdown. (On models with display) ()
· Timer may stop during water intake. >>> Timer indicator will not countdown until the product takes in adequate amount of water. The product will wait until there is sufficient amount of water to avoid poor washing results due to lack of water. Timer indicator will resume countdown after this.
· Timer may stop during heating step. >>> Timer indicator will not countdown until the product reaches the selected temperature.
· Timer may stop during spinning step. >>> Automatic unbalanced load detection system is activated due to the unbalanced distribution of the laundry in the product.
Programme duration does not countdown. ()
· There is unbalanced load in the product. >>> Automatic unbalanced load detection system is activated due to the unbalanced distribution of the laundry in the product.
Product does not switch to spinning step. (*)
· There is unbalanced load in the product. >>> Automatic unbalanced load detection system is activated due to the unbalanced distribution of the laundry in the product.
· The product will not spin if water is not drained completely. >>> Check the filter and the draining hose.
· Excessive foam has occurred and automatic foam absorption system has been activated due to too much detergent usage. >>> Use recommended amount of detergent.

Washing performance is poor: Laundry turns gray. (**)
· Insufficient amount of detergent has been used over a long period of time.

Use the recommended amount of detergent appropriate for water hardness and the laundry.
· Washing has been made at low temperatures for a long time. >>> Select the proper temperature for the laundry to be washed.
· Insufficient amount of detergent is used with hard water. >>> Using insufficient amount of detergent with hard water causes the soil to stick on the cloth and this turns the cloth into gray in time. It is difficult to eliminate graying once it happens. Use the recommended amount of detergent appropriate for water hardness and the laundry.
· Excessive amount of detergent is used. >>> Use the recommended amount of detergent appropriate for water hardness and the laundry.
Washing performance is poor: Stains persist or the laundry is not whitened. (**)
· Insufficient amount of detergent is used. >>> Use the recommended amount of detergent appropriate for water hardness and the laundry.
· Excessive laundry is loaded in. >>> Do not load the product in excess. Load with amounts recommended in the “Programme and consumption table”.
· Wrong programme and temperature were selected. >>> Select the proper programme and temperature for the laundry to be washed.
· Wrong type of detergent is used. >>> Use original detergent appropriate for the product.
· Detergent was put in the wrong compartment. >>> Put the detergent in the correct compartment. Do not mix the bleaching agent and the detergent with each other.

EN / 46

Washing performance is poor: Oily stains appeared on the laundry. (**)

the laundry to become stiff in time. Use appropriate amount of detergent accord-

· Regular drum cleaning is not applied. >>> Clean the drum regularly. For this procedure, see — MISSING LINK —
Washing performance is poor: Clothes smell unpleasantly. ()
· Odours and bacteria layers are formed on the drum as a result of continuous washing at lower temperatures and/or in short programmes. >>> Leave the detergent drawer as well as the loading door of the product ajar after each washing. Thus, a humid environment favourable for bacteria cannot occur in the machine
Colour of the clothes faded. ()
· Excessive laundry was loaded in. >>> Do not load the product in excess.
· Detergent in use is damp. >>> Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures.
· A higher temperature was selected. >>> Select the proper programme and temperature according to the type and soiling degree of the laundry.
Washing machine does not rinse well.

ing to the water hardness. · Detergent was put in the wrong compart-
ment. >>> If detergent is put in the prewash compartment although prewash cycle is not selected, the product can take this detergent during rinsing or softener step. Put the detergent in the correct compartment. · Detergent was mixed with the softener. >>> Do not mix the softener with detergent. Wash and clean the drawer with hot water.
Laundry does not smell like the softener. (**)
· Detergent was put in the wrong compartment. >>> If detergent is put in the prewash compartment although prewash cycle is not selected product, the can take this detergent during rinsing or softener step. Wash and clean the drawer with hot water. Put the detergent in the correct compartment.
· Detergent was mixed with the softener. >>> Do not mix the softener with detergent. Wash and clean the drawer with hot water.

· The amount, brand and storage conditions of the detergent used are inappropriate. >>> Use a detergent appropriate for the washing machine and your laundry. Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures.
· Detergent was put in the wrong compartment. >>> If detergent is put in the prewash compartment although prewash cycle is not selected, the product can take this detergent during rinsing or softener step. Put the detergent in the correct compartment.
· Pump filter is clogged. >>> Check the filter.
· Draining hose is folded. >>> Check the drain hose.
Laundry became stiff after washing. (**)

Detergent residue in the detergent drawer. (**)
· Detergent was put in wet drawer. >>> Dry the detergent drawer before putting in detergent.
· Detergent has gotten damp. >>> Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures.
· Water pressure is low. >>> Check the water pressure.
· The detergent in the main wash compartment got wet while taking in the prewash water. Holes of the detergent compartment are blocked. >>> Check the holes and clean if they are clogged.
· There is a problem with the detergent drawer valves. >>> Call the Authorised Service Agent.

· Insufficient amount of detergent is used. >>> Using insufficient amount of detergent for the water hardness can cause

· Detergent was mixed with the softener. >>> Do not mix the softener with detergent. Wash and clean the drawer with hot water.

EN / 47

Detergent residue on the clothes.
· The machine might have been overloaded. >>> Do not overload the machine.
· Wrong programme and temperature were selected. >>> Select the proper programme and temperature for the laundry to be washed.
· Wrong type of detergent might have been used. >>> Select the proper detergent for the laundry to be washed.
Too much foam forms inside the product. (**)
· Improper detergents for the washing machine is used. >>> Use detergents appropriate for the washing machine.
· Excessive amount of detergent is used. >>> Use only sufficient amount of detergent.
· Detergent was stored under improper conditions. >>> Store detergent in a closed and dry location. Do not store in excessively hot places.
· Some meshed laundry such as tulle may foam too much because of their texture. >>> Use smaller amounts of detergent for this type of item.
· Detergent was put in the wrong compartment. >>> Make sure you place the detergent in the appropriate compartment.
· Softener is being taken early by the product. >>> There may be problem in the valves or in the detergent drawer. Call the Authorised Service Agent.
Foam is overflowing from the detergent drawer.
· Too much detergent is used. >>> Mix 1 tablespoonful softener and ½ l water and pour into the main wash compartment of the detergent drawer. >>> Put detergent into the product suitable for the programmes and maximum loads indicated in the “Programme and consumption table”. When you use additional chemicals (stain removers, bleaches and etc.), reduce the amount of detergent.

Laundry remains wet at the end of the programme. (*)
· Excessive foam has occurred and automatic foam absorption system has been activated due to too much detergent usage. >>> Use recommended amount of detergent.
Drying lasts too long.
· The machine might have been overloaded. >>> Do not overload the machine.
· Spinning might not be sufficient for laundry. >>> Select a higher spin speed in the washing step of the Washer-Dryer.
· Tap is turned off. >>> Turn on the taps.
Laundry comes off wet after the drying step.
· The programme selected might not be suitable for the type of laundry. >>> Check the care labels on clothes and select a programme accordingly, or select timed programmes additionally.
· The machine might have been overloaded. >>> Do not overload the machine.
· Spinning might not be sufficient for laundry. >>> Select a higher spin speed in the washing step of the Washer-Dryer.
Machine does not start or programme cannot be started.
· Power cable might be unplugged. >>> Make sure that the power cable is plugged in.
· Programme might not be set, or the Start/ Pause/Cancel button might be not pressed. >>> Make sure the programme is set and the machine is not in Standby mode.
· Child lock might be activated. >>> Disable Child Lock.
Laundry shrinks, fades, tarnishes or gets damaged.
· The programme selected might not be suitable for the type of laundry. >>> Check the care labels on clothes and select a programme accordingly, or select

EN / 48

timed programmes additionally. You should not dry laundry that is not suitable for drying.
Machine does not dry.
· Laundry might not be dried or the drying step might not be enabled. >>> Check if the drying function is selected after the selected washing programme.
Loading door cannot be opened.
· The door of your machine might not be opening due to safety reasons. >>> If the door locked indicator is still active on the display after the drying step, the machine will keep the door locked for your safety until it cools down.
· If there is no power, loading door of the product will not open. >>> To open the loading door, open the pump filter cap and pull down the emergency handle positioned at the rear side of the said cap. See Loading Door Lock [} 37]

(*) The product does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the product and to its surrounding environment. Laundry should be rearranged and re-spun. (**) Regular drum cleaning is not applied. Clean the drum regularly. See — MISSING LINK —
If you cannot eliminate the problem although you follow the instructions in this section, consult your dealer or the Authorised Service Agent. Never try to repair a nonfunctional product yourself.
Check the HomeWhiz section for the relevant troubleshooting information.

DISCLAIMER / WARNING

Some (simple) failures can be adequately
handled by the end-user without any safety
issue or unsafe use arising, provided that
they are carried out within the limits and in
accordance with the following instructions
(see the “Self-Repair” section).
Therefore, unless otherwise authorized in
the “Self-Repair” section below, repairs
shall be addressed to registered profes-
sional repairers in order to avoid safety is-
sues. A registered professional repairer is a
professional repairer that has been granted
access to the instructions and spare parts
list of this product by the manufacturer ac-
cording to the methods described in legis-
lative acts pursuant to Directive 2009/125/
EC. However, only the service agent (i.e. authorized professional repairers) that you can reach through the phone number given in the user manual/warranty card or through your authorized dealer may provide service under the guarantee terms. Therefore, please be advised that repairs by professional repairers (who are not authorized by Beko ) shall void the guarantee.

Self-Repair
Self-repair can be done by the end-user with regard to the following spare parts: door, door hinge and seals, other seals, door locking assembly and plastic peripherals such as detergent dispensers (an updated list is also available in support.beko.com as of 1st of March 2021)
Moreover, to ensure product safety and to prevent risk of serious injury, the mentioned self-repair shall be done following the instructions in the user manual for self-repair or which are available in support.beko.com For your safety, unplug the product before attempting any self-repair.
Repair and repair attempts by end-users for parts not included in such list and/or not following the instructions in the user manuals for self-repair or which are available in support.beko.com , might give raise to safety issues not attributable to support.beko.com , and will void the warranty of the product.
Therefore, it is highly recommended that end-users refrain from the attempt to carry out repairs falling outside the mentioned list

EN / 49

of spare parts, contacting in such cases authorized professional repairers or registered professional repairers. On the contrary, such attempts by end-users may cause safety issues and damage the product and subsequently cause fire, flood, electrocution and serious personal injury to occur. By way of example, but not limited to, the following repairs must be addressed to authorized professional repairers or registered professional repairers: motor, pump assembly, main board, motor board, display board, heaters etc. The manufacturer/seller cannot be held liable in any case where end-users do not comply with the above The spare part availability of the washing machine or washer-dryer that you purchased is 10 years. During this period, original spare parts will be available to operate the washing machine or washer-dryer properly.
EN / 50

References

• HomeWhiz Smart Home Solutions
• HomeWhiz Smart Home Solutions

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>