ZINK 42057-B Bradley Solar LED Floodlight Spike with RC User Manual
- October 30, 2023
- ZINK
Table of Contents
ZINK 42057-B Bradley Solar LED Floodlight Spike with RC
Product Information: Bradley Solar LED Floodlight Spike with RC
The Bradley Solar LED Floodlight Spike with RC is an outdoor solar-powered light that can be wall-mounted or post-mounted. It has three lighting modes and an SOS signal flashing mode. The light needs to charge in full sunlight for 10 to 12 hours when using it for the first time, and should run for at least 10 days to reach maximum battery capacity. The solar panel should be placed in a bright sunny location, free from cover and not in a shaded area. The LED’s are non-replaceable. The product is made in China for ZINK and distributed by Cascade Holdings Ltd in the UK.
Installation Instructions
- When using for the first time, allow the solar light to charge in full sunlight for 10 to 12 hours.
- Position the light in a bright sunny location where it will receive maximum sunlight, free from cover and not in a shaded area.
- Avoid positioning the light near other light sources such as street lamps that may cause the solar lights to flicker on and off.
- Assemble the lamp either as a wall mount or post mount.
Lighting Modes
- MODE1: When a person enters the induction zone, the light will turn on at the brightest light setting (100%).
- MODE2: If nobody enters the induction area, the light will be on a dim setting (10%). When a person enters the induction zone, the light will turn on at the brightest light setting (100%).
- MODE3: The light will be on a dim setting (10%) and the induction zone is turned off.
- SOS: When a person enters the induction zone, the light will flash an SOS signal.
Warnings:
- The product is suitable for outdoor use only.
- Do not expose the product to direct heat, flames, or immerse it in water.
- Keep out of reach of children and pets.
Cleaning:
If the solar panel gets dirty, the charging capacity will be reduced. Clean
panels occasionally with a soft damp cloth.
Troubleshooting
- If the night runtime is short, the battery is not fully charged. Install the solar light in an area where it can receive the maximum amount of direct sunlight.
- If the light does not turn on at night, the location is too close to other light sources. Relocate the light away from other light sources.
Disposal
The Crossed Wheelie Bin symbol on the product means that the product is classed as Electrical or Electronic equipment and should not be disposed of with other household or commercial waste at the end of its useful life. The goods must be disposed of according to your local council guidelines.
Bradley Solar LED Floodlight Spike with RC
- Suitable for OUTDOOR USE ONLY – IP65 rated
- Easy to install, no wiring necessary
- Recharges batteries using solar energy
- Automatically charges in sunlight
Installation
- When using for the first time, the solar light needs to charge in full sunlight for 10 to 12 hours. Allow the light to run at least 10 days, charging/discharging to reach the maximum battery capacity.
- Ensure the light is positioned in a bright sunny location where it will receive maximum sunlight. Ideally, in a position where it is free from cover and not in a shaded area. Lack of sunlight will aect charge times and operation.
- Avoid other light sources such as street lamps that may cause the solar lights to sticker on and off.
- Assembling the lamp
Remote control
Warnings
- Suitable for OUTDOOR USE ONLY
- DO NOT expose this product to direct heat, ames or immerse in water.
- Keep out of reach of children and pets.
- The LED’s are non-replaceable
- Please retain this information for future reference.
Cleaning
- If the solar panel gets dirty the charging capacity will be reduced. Clean panels occasionally with a soft damp cloth.
Troubleshooting
-
Night runtime is short
The battery is not fully charged. Install the solar light in an area where it can receive the maximum amount of direct sunlight. -
Light does not turn on at night
The location is too close to other light sources. Relocate the light away from other light sources
Made in China for ZINK, Gorse Mill, Gorse Street, Oldham, OL9 9RJ, U.K. Helpline: 0333 005 0077, Mon-Fri, 9am-5pm
UK MANUFACTURER / IMPORTER
CASCADE HOLDINGS LTD.
GORSE MILL
GORSE STREET
OLDHAM.
UNITED KINGDOM
OL9 9RJ EU AUTHORISED REPRESENTATIVE:
AUTHORISED REP COMPLIANCE
GROUND FLOOR
71 LOWER BAGGOT STREET
DUBLIN
IRELAND
D02 P593
Disposal:
The “Crossed Wheelie Bin” symbol on the product means that the product is
classed as Electrical or Electronic equipment and should not be disposed with
other household or commercial waste at the end of its useful life. The goods
must be disposed of according to your local council guidelines
Errors and omissions excepted.
Copyright© 2023. Zink
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>