ZINK ZN-20941-WHT-65 Leto Up and Down Wall Light Installation Guide
- June 1, 2024
- ZINK
Table of Contents
ZINK ZN-20941-WHT-65 Leto Up and Down Wall Light
Specifications
| Model | INS 20941 IP65 Version – A |
|---|---|
| Requirements | 2 x 7W Max. GU10 LED Reflector Bulbs (Bulbs Not Included) |
REQUIRES 2 x 7W MAX. GU10 LED REFLECTOR BULBS
BULBS NOT INCLUDEDInstallation Diagrams
The diagrams illustrate various stages of the installation process for the lighting fixture:
- Diagram A: Shows the electrical switch in the OFF position, indicating the first step before installation begins.
- Diagram B: Depicts the lighting fixture in an unassembled state.
- Diagram C: Illustrates the wiring connections to the fixture with arrows indicating the direction for securing the wires.
- Diagram D: Displays the wiring connected with a cover and the fixture is ready to be mounted to the wall.
- Diagram E: Shows the fixture mounted on a brick wall with the wiring cover in place.
- Diagram F: Represents different components of the fixture in various stages of disassembly.
- Diagram G: Highlights the individual lamps of the fixture with a notation “No incl” indicating that the bulbs are not included.
- Diagram H: Demonstrates the electrical switch in the ON position, which would be the final step after installation and bulb placement.
Please note that the bulbs are not included with the fixture and must be purchased separately.
FAQ
What type of bulbs are required for the lighting fixture?
The fixture requires 2 x 7W Max. GU10 LED Reflector Bulbs, which are not included with the purchase.
Are the bulbs included with the lighting fixture?
No, the bulbs are not included and must be acquired separately.
How do I know when to turn the power on during installation?
The power should remain off during the entire installation process and only be turned on after ensuring that the fixture is properly installed and the bulbs are in place.
Important Note
Please take time to read this leaflet carefully and retain it for future
reference.