Hama PD10-HD Power Pack 10000mAh Instruction Manual
- October 30, 2023
- Hama
Table of Contents
PD10-HD Power Pack 10000mAh
Product Information: PD10-HD Power Pack
Model Number: 00 187261
Battery Capacity: 10000 mAh
This power pack contains high-density lithium-polymer cells,
which enable a lightweight and compact design along with a
comparatively high capacity.
Product Usage Instructions
1. Explanation of Warning Symbols and Notes
Warning: This symbol is used to indicate safety
instructions or to draw your attention to specific hazards and
risks.
Note: This symbol is used to indicate
additional information or important notes.
2. Charging the Power Pack
Before using the power pack for the first time, charge it fully
using a suitable charger. Connect the charger to the micro-USB
input of the power pack and the power supply. The LED indicators
will light up and show the current charging status. When all four
LEDs are lit, the power pack is fully charged. Disconnect the
charger from the power pack and the power supply.
3. Charging Terminal Devices
Connect your device to the USB output of the power pack using a
suitable cable. The LED indicators will light up and show the
current charging status. When all four LEDs are off, the power pack
is empty and needs to be recharged. Note that using an unsuitable
cable or adapter may reduce the charging current considerably,
increasing the charging time and potentially overloading the power
pack.
Please keep these instructions in a safe place for future
reference. If you sell the device, please pass these operating
instructions on to the new owner.
“PD10-HD” Power Pack
00 187261
10000 mAh
Operating Instructions GB Bedienungsanleitung D
Mode d`emploi F Instrucciones de uso E RUS Gebruiksaanwijzing NL
Instrukcja obslugi PL Használati útmutató H
Návod k pouzití CZ Návod na pouzitie SK Manual de instruçõe P Manual de
utilizare RO BG
G Operating instruction
Thank you for choosing a Hama product. Take your time and read the following
instructions and information completely. Please keep these instructions in a
safe place for future reference. If you sell the device, please pass these
operating instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Warning This symbol is used to indicate safety instructions or to draw your
attention to specific hazards and risks.
Note This symbol is used to indicate additional information or important
notes.
High-density lithium-polymer cells This product contains high-density lithium-
polymer cells. High-density cells were developed mainly for smartphone
production in order to meet the high capacity and performance demands using a
minimum amount of space. This new generation of lithium-polymer cells enables
a lightweight and compact design along with a comparatively high capacity.
2. Package Contents · Power Pack “PD10-HD”, 10000 mAh · USB-C to USB-C cable
· These operating instructions
3. Safety Notes · The product is intended for private, non-commercial use
only. · Use the product for its intended purpose only. · Protect the product
from dirt, moisture and overheating, and only use it in a dry environment. ·
Do not use the product in the immediate vicinity of heaters or other heat
sources or in direct
sunlight. · Keep this product, as all electrical products, out of the reach of
children! · Do not drop the product and do not expose it to any major shocks.
· Do not operate the product outside the power limits given in the
specifications. · Do not open the device or continue to operate it if it
becomes damaged. · Dispose of packaging material immediately according to
locally applicable regulations. · Since the battery is integrated and cannot
be removed, you will need to dispose of the product as
a whole. Do this in compliance with the legal requirements. · Do not modify
the product in any way. Doing so voids the warranty. · Do not use the product
in areas where the use of electronic devices is not permitted. · Do not
attempt to service or repair the product yourself. Leave any and all service
work to qualified
experts. · Do not throw the battery or the product into fire. · Do not tamper
with or damage/heat/disassemble the batteries/rechargeable batteries.
2
4. Operation
4.1 Charging the Power Pack
Warning Battery · Do not charge the power pack using your PC or the
notebook. The charging currents can
damage the USB port of the PC/notebook. · Only use suitable charging devices
or USB connections for charging. · As a rule, do not charge devices or USB
connections that are defective and do not try to repair
them yourself. · Do not overcharge the product or allow the battery to
completely discharge. · Avoid storing, charging or using the device in extreme
temperatures and extremely low
atmospheric pressure (for example, at high altitudes). · When stored over a
long period of time, batteries should be charged regularly (at least every
three months).
· Begin charging the power pack by connecting the included USB-C to USB-C
cable to the power pack’s USB-C (IN 5V/3A; 9V/2A) port and to a suitable USB-C
charger. Alternatively, the power pack can also be charged via the Micro-USB
port. For this purpose, connect a Micro-USB cable to the Micro-USB input (IN
5V/3A; 9V/2A) on the power pack and to a suitable USB charger. Please refer to
the operating instructions for the USB charger used.
· Charging begins and ends automatically. · Charge the Power Pack fully before
using it for the first time.
Note Capacity · The capacity is always shown when the Power Pack is
charging. · Each status LED corresponds to 25% of the capacity. When an LED is
permanently illuminated,
this indicates that this capacity level has already been reached. The Power
Pack is charged to at least 75% if three LEDs are illuminated, and the fourth
is flashing. · If all four status LEDs light up, the full capacity is
available. · Press the button of the Power Pack to switch it on and to check
its current capacity. · To switch the power pack off, press the button twice
until the status LEDs go out.
4.2 Charging terminal devices
Warning Connecting terminal devices · Before connecting a terminal device,
check whether the power output of the charger can supply
sufficient power for the device. · Ensure that the total power consumption of
the connected terminal device does not exceed
3000 mA. · Please refer to the instructions in the operating manual of your
terminal device. · It is essential that you observe these specifications and
the safety instructions regarding the
power supply of your devices. · The power pack must not be charged and
discharged at the same time! · Please do not use the USB and USB-C outputs
simultaneously for charging, as this reduces the
charging current considerably. As a result, the charging time is greatly
increased and the power pack may be overloaded.
3
Obsah je uzamcen
Dokoncete, prosím, proces objednávky. Následn budete mít pístup k celému
dokumentu.
Proc je dokument uzamcen? Nahnvat Vás rozhodn nechceme. Jsou k tomu dva hlavní
dvody: 1) Vytvoit a udrzovat obsáhlou databázi návod stojí nejen spoustu úsilí
a casu, ale i financní prostedky.
Dlali byste to Vy zadarmo? Ne. Zakoupením této sluzby obdrzíte úplný návod a
podpoíte provoz a rozvoj nasich stránek. Teba se Vám to bude jest nkdy hodit.
) Mozná zpocátku ano. Ale vzte, ze dotovat to dlouhodob nelze. A rozhodn na
tom nezbohatneme. 2) Pak jsou tady ,,roboti”, kteí se pizivují na nasí práci a
,,vysávají” výsledky naseho úsilí pro svj prospch. Tímto krokem se jim to
snazíme pekazit. A pokud nemáte zájem, respektujeme to. Urgujte svého
prodejce. A kdyz neuspjete, rádi Vás uvidíme!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>