JASHEN V18 JS-AVO2A01 Vacuum Cleaner Owner’s Manual

JASHEN V18 JS-AVO2A01 Vacuum Cleaner Owner’s Manual

WELCOME!
Congratulations on your purchase. Use this instruction manual to learn about your new vacuum’s great features. From assembly to use to maintenance, you will find it all in here.

PLEASE READ IT CAREFULLY AND KEEP FOR FUTURE REFERENCE
If you have any questions, please contact our Email at: support@jashen- tech.com

IMPORTANT SAFETY INSTRUCTIONS FOR INDOOR USE ONL
WARNING
When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING (THIS APPLIANCE), Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY

• DO NOT use it to vacuum any liquids.
• DO NOT immerse in water when cleaning.
• If the handheld vacuum/wand is damaged, discontinue use.

GENERAL USE

• To avoid fire, explosion, or injury, inspect the battery packs and chargers for any damage before use. DO NOT use a damaged cord or plug. If the appliance has been dropped, damaged, left outdoors, dropped into water, or is not working as it should, return it to a service center.
• DO NOT use it outdoors or on wet surfaces.
• Use only on dry surfaces.
• DO NOT handle chargers, including charger plugs and charger terminals with wet hands.
• DO NOT leave the vacuum cleaner unattended.
• Always turn off this appliance before connecting or disconnecting the floor nozzle.
•  DO NOT incinerate an appliance, even if it is severely damaged, as the power pack may explode in a fire.
• Keep the vacuum cleaner moving over the carpet surface at all times to avoid damaging the carpet fibers.
• DO NOT place vacuum cleaners on unstable surfaces such as chairs or tables.
• Keep your work area well-lit.
• DO NOT put any objects into openings.
• DO NOT use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow.
• DO NOT allow it to be used as a toy. Close attention is necessary when used by or near children, pets, or plants.
• DO NOT use if the airflow is restricted; if the air paths or the floor nozzle become blocked, turn off the vacuum cleaner and remove the battery.
• Clear all obstructions before returning the battery to vacuum and power on again. Keep floor nozzles away from hair, face, fingers, uncovered feet, or loose clothing.
• Store the appliance indoors. DO NOT use or store it below 39.2° F (4° C). Ensure the appliance is at room temperature before operating.
• DO NOT carry the appliance with your finger on the power button.

GENERAL CLEANING

• DO NOT vacuum up hard or sharp objects such as glass, nails, screws, or coins that could damage the vacuum cleaner.
• DO NOT vacuum up drywall dust, fireplace ash, or embers. DO NOT use as an attachment to power tools for dust collection.
• DO NOT vacuum up smoking or burning objects such as hot coals, cigarette butts, or matches.
• DO NOT vacuum up flammable or combustible able materials, such as lighter fluid, gasoline, or kerosene, or use a vacuum in areas where they may be present.
• DO NOT vacuum up toxic solutions (e.g., chlorine bleach, ammonia, or drain cleaner).
• DO NOT use in an enclosed space where vapors are present from paint, paint thinner, moth-proofing substances, flammable dust, or other explosive or toxic materials.
• DO NOT vacuum up any liquids.
• DO NOT immerse the vacuum cleaner in water or other liquids.
• Use extra care when cleaning on stairs.

DUST CUP/FILTERS/ ACCESSO­RIES

• DO NOT use without a filter, dust cup, and all filters in place. Make sure all accessories are in place after routine maintenance.
• Disconnect the battery pack from the appliance before making any adjustments, changing accessories, or storing the appliance. Such preventive safety measures reduce the risk of starting the appliance accidentally.
• Make sure that all filters are thoroughly dry and all accessories are free of blockages after routine cleaning.
• Use only Jashen® brand filters and accessories. Using other brands will void the warranty.

BATTERY PACK

• DO NOT charge the appliance with the power on.
• DO NOT charge power pack at temperatures below S0° F (10°C) or above 100° F (38°C). Charging improperly or at temperatures outside of the specified range may damage the Battery and increase the risk of fire.
• DO NOT expose the battery or appliance to fire or temperature above 266° F (130°() as it may cause an explosion. Battery should not be stored at temperatures below 37.4° F (3°C) or above 104° F (40°C) to maintain long-term battery life.
• Use the Battery Charging Dock on flat, stable surfaces only.
• Use appliance only with specifically designated batteries and adapter. Use of any other battery packs or adapter may create a risk of injury and fire.
• Must use the original adapter to charge, otherwise, it may damage the machine.
• When the Battery is not in use, keep it away from all metal objects, such as paper clips, coins, keys, nails, or screws. Shorting the battery terminals together increases the risk of fire or burns. Battery should not be exposed to or submerged in any water, salt water, or other liquids.
• Under abusive conditions, liquid may be ejected from the battery pack. Avoid contact with liquid, as it may cause irritation or burns. If contact occurs, flush with water. If liquid contacts the eyes, seek medical help.
• DO NOT modify or attempt to repair the appliance or the battery yourself, the appliance should only be serviced by a qualified repair person using only identical replacement parts.

GETTING TO KNOW YOUR JASHEN VACUUM CLEANER

Function Overview

GETTING TO KNOW YOUR JASHEN CORDLESS VACUUM
NOTE: Your Battery does not come fully charged. Prior to first use, fully charge. During first use, discharge fully to condition your battery.

• Battery pack with the digital display screen
• Main body
• Dust Cup
• Wand
• Direct-drive LED
• multi-use floor head
• Crevice tool
• Dusting Brush
• Upholstery Tool
• Wall-mounted dock with screw
• Adapter
• Hard Floor Brushroll
• Carpet Brushroll

ASSEMBLING YOUR VACUUM

Assembling the main body

Assembling the battery

Assembling the soft roller (For hard floor)

Assembling the brush roller (For carpet floor)

Mode switch for Hard floor / Carpet floor

1. Hard floor mode: Move the bumper as Carpet floor mode: Move the bumper as illustrated with a soft roller installed. With big illustrations with brush roll installed. Closed space opening in the front sucks up large debris creates more suction, and direct-drive floor head and fine dust from hard floors.
2. clean deep into the carpet to remove ground-in dirt.

Install the wall-mounted dock

Charging and runtime

Installation of the wall-mounted dock

USING YOUR VACUUM

Filter cleaning alert: Clean the filter when this sign lights up, ignore this alert may cause suction loss and fast drainage of the battery.
AUTO mode: This sign will light up when the vacuum turn into intensive cleaning by detecting heavy dirt.
Battery indicator: This shows the remaining capacity of the battery.

MAINTAINING YOUR VACUUM

WARNING: Hand wash filters only with water to prevent damage from cleaning chemicals. Allow ALL filters to air-dry completely before replacing them in the vacuum to prevent liquid from being drawn into electric parts.
CAUTION: Turn off the power and remove the power pack before servicing.
IMPORTANT: Clean the dust screen inside the dust cup as required.
NOTE: Empty the dust cup when debris reaches the MAX fill line

EMPTYING THE DUST CUP
To empty the dust cup, first, remove the handheld vacuum from the wand by pressing the Wand Release button and pulling it up on the handheld vacuum. Position the dust cup over a bin, then open the bottom of the dust cup by pressing the Dust Cup release button on the side.

CLEANING THE DUST CUP AND FILTERS
To clean the dust cup, remove the dust cup from the handheld vacuum and rinse it with water. Flush the dirt off as needed. Once the dust cup is completely dry, return it to a handheld vacuum. To clean the filter, remove the filter from the dust cup as illustrated. Rinse with water. Once completely dry, reinsert the filter into the dust cup.

MAINTAINING YOUR VACUUM
WARNING: When cleaning the brush roller, be sure to not cut anything other than hair, string, fibers, or other debris.
TIP: Ensure the floor head is completely sealed and closed before using.

WARNING: Hand wash filters only with water to prevent damage from cleaning chemicals. Allow ALL filters to air-dry completely before replacing them in the vacuum to prevent liquid from being drawn into electric parts.
CAUTION: Turn off the power and remove the power pack before servicing.
IMPORTANT : Clean the dust screen inside the dust cup as required.
NOTE: Empty the dust cup when debris reaches the MAX fill line.

EMPTYING THE DUST CUP
To empty the dust cup, first, remove the handheld vacuum from the wand by pressing the Wand Release button and pulling it up on the handheld vacuum. Position the dust cup over a bin, then open the bottom of the dust cup by pressing the Dust Cup release button on the side.

CLEANING THE DUST CUP AND FILTERS

• To clean the dust cup, remove the dust cup from the handheld vacuum and rinse it with water. Flush the dirt off as needed. Once the dust cup is completely dry, return it to a handheld vacuum.
• To clean the filter, remove the filter from the dust cup as illustrated. Rinse with water. Once completely dry, reinsert the filter to the dust cup.

WARNING: When cleaning the brush roller, be sure to not cut anything other than hair, string, fibers, or other debris.
TIP: Ensure the floor head is completely sealed and closed before using.

MAINTAINING THE BRUSH ROLLER / SOFT ROLLER

• Release the brush roller/soft roller by sliding the release button, and remove any string, hair, or debris that may be wrapped around the brush roller/soft roller by running scissors along the guide on the roller.
• Reinsert the brush roller/soft roller to the floor head, until the release button clicks into place.
• Wash the Soft Roller as needed, using only water. Air-dry completely for at least 24 hours before returning it to the brush roller garage.

CHECKING FOR BLOCKAGES
Handheld, Wand and Floor Head Turn off the vacuum and remove the battery. Remove the wand from the handheld vacuum and check all intake openings. Remove the floor head from the wand and check the wand for blockages.

TROUBLESHOOTING GUIDE

Problem

|

Possible cause

|

Remedies

---|---|---

The appliance doesn’t work

|

No power

AUTO protection for overheated The suction mouth is blocked

| Charge the battery according to instrucions

Turn off appliance, Restart after cooling Check and remove blockages

Hepa cleaning indicator blinking

|

Dustcup and filters are need cleaning

|

Empty dust cup and clean filters

Brush Roller/Soft Roller does not spin

| Brushroll light flashs, indicate floor head blockage

Roller auto protection for overheated

Connection issue between the handheld vacuum, wand, and nozzle

| Turn off appliance and remove blockage of floor head

Turn off appliance ,Restart after cooling

Disconnecting and rub the junction point with a soft cloth, reattaching the pieces

Weak suction power

| The pre-filter is not installed

The appliance is blocked(such as tube, suction mouth or some other parts)

The brush roller is wrapped by hairs or fibers

| Install the pre-filter Clear blockages

Clean the brush roller

Abnormal motor sounds

|

The appliance is blocked(such as tube, suction mouth or some other parts)

|

Clear blockages

Battery won’t charge

|

The adaptor is not correctly inserted Poor contact of the main body or battery Wrong charger being used

|

Reinsert the adaptor correctly

Check if the main body and battery are correctly placed

Use the original Jashen I type adaptor

Charging too slow

|

Temperatures outside of the specified range

|

Charge the battery when the terperature above 50°F (l0°C) and below 100°F (38°C)

WARNING: To reduce the risk of shock and unintended operation, turn off the power and remove the power pack before servicing. In any other case or if the solution explained above did not solve the problem, please contact us
at support@jashen-tech.com

SPECIFICATION

Model

| ****

JS- AV02A01

---|---
Battery| 25.2V 2500mAh
Rated Power| 350W
Dustbin Capacity| O.SL
Charging Time| 4 hrs
Charging Output| 30V

Running Time

| ****

15-40 mins

WARNING: The above data is from the JASHEN laboratory, the actual situation may vary according to the use environment.

Disposal

The battery contains materials that are harmful to the environment and must be removed from the appliance before it is discarded. When removing the battery, the appliance must be powered off. Waste batteries should be handled properly. Do not put them into fire, water, or soil. or If the battery leakage touches the skin or clothing, flush with water immediately to avoid skin injury and seek medical help.

Visit JASHEN Website: www.jashen-tech.com
Customer Service Email: M support@jashen-tech.com
Call our Customer Service: 1-877-402-9868 (Toll-free for North America) Monday-Friday from 9:00 A.M – 5:00 P.M CST Illustrations may differ from actual products. We are constantly striving to improve our products; therefore the specifications contained herein are subject to change without notice. Jashen is a registered trademark of Shenzhen Jashen Technology Co., Ltd

Download PDF:JASHEN V18 JS-AVO2A01 Vacuum Cleaner Owner’s Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>