BODYCRAFT F735 Oly Plate Holder Option Owner’s Manual
- October 30, 2023
- BODYCRAFT
Table of Contents
BODYCRAFT F735 Oly Plate Holder Option
https://www.bodycraft.com/product-registration/
Assembled Parts List
| Part # | Assembly Parts List | QTY |
|---|---|---|
| F735-501-ASM | Frame, Top, Rt & Lt – Assembly | 2 |
| F735-502 | Frame, Upright, for Oly Plate Storage | 2 |
| F735-503-ASM | Frame, Bottom, Rt & Lt – Assembly | 2 |
| F735-504-ASM | Oly Plate Horn – Assembly | 8 |
F735-514-ASM
| Adjustable Foot, for Lower Base Frame –
Assembly
| ****
2
| Part # | Assembly Hardware | QTY |
|---|---|---|
| F735-505 | Nut, Nylon Lock 1/2″ – BLACK | 8 |
| F735-506 | Washer, Spring 3/8″ – BLACK | 8 |
| F735-507 | Bolt, Hex Head 1/2″ x 4-1/2″ – BLACK | 4 |
| F735-508 | Bolt, Hex Head 1/2″ x 3-1/4″ – BLACK | 4 |
| F735-509 | Bolt, Hex Head 1/2″ x 2-1/2″ – BLACK | 8 |
| F735-510 | Bolt, Hex Head 3/8″ x 1-1/4″ – BLACK | 8 |
| F735-511 | Washer, Flat 1/2″ – BLACK | 16 |
| F735-512 | Washer, Flat 3/8″ – BLACK | 8 |
THE FOLLOWING TOOLS ARE RECOMMENDED FOR ASSEMBLY:
Product Assembly
TIP: Very stable and safe to start the Assembly STEPS when on its side, horizontally NOT upright.
STEP 1 : Installation of the Main Frame Assemblies
Loosely attach the Frame, Top, Rt & Lt Sides – Assembly
(501-ASM) & the Frame, Bottom, Rt & Lt Sides –
Assembly (503-ASM) to the Frame, Uprights (502) using:
- Eight BOLTS, Hex 1/2″ x 2-1/2” (509)
- Sixteen WASHERS, Flat 1/2″ (511)
- Eight NUTS, Hex Lock 1/2″ (505)
STEP 2: Installation of the Oly Plate Horns
Attach all the Oly Plate Horns (504-ASM) to the Frame, Uprights (502-ASM)
using:
- Eight BOLTS, Hex 3/8″ x 1-1/4” (510)
- Eight WASHERS, Spring 3/8″ (506)
- Eight WASHERS, Flat 3/8″ (512)
TIP: Keep bolts loose when installing on an F730 / F430 (Power Rack) or
F738 (RFT).
Then level Bottom Frames with the Adjustable Foot (514-ASM) on both sides.
STEP 3: Installation of the F735 Oly Plate Holder to an F730 / F430
(Power Rack) or F738 (RFT)
Attach the Olympic Plate Rack Option (F735) to the Upright, Rear, Right & Left
Sides (5) using:
- Four BOLTS, Hex 1/2″ x 3-1/4” (508)
- Four BOLTS, Hex 1/2″ x 4-1/2” (507)
- Sixteen WASHERS, Flat 1/2″ (511)
- Eight NUTS, Nylon 1/2″ (505)
STEP 4: “Torque Time” on all Frames & Oly Plate Horns
- Tighten to the recommended torque specs of 20 ft-lbs (+/- 2 lbs) on all 1/2” Bolts & Nuts.
- All 8 Bolts (#510) on the Oly Plate Horns to the torque specs of 17 ft-lbs (+/- 2 lbs).
- Tighten Jam Nuts on Adjustable Feet @ 7 ft-lbs.
Detailed Parts List & Parts Exploded View
| Part # | Detailed Parts List | QTY |
|---|---|---|
| F735-501 | Frame, Top, Rt & Lt | 2 |
| F735-502 | Frame, Upright , for Oly Plate Storage | 2 |
| F735-503 | Frame, Bottom, Rt & Lt | 2 |
| F735-504 | Oly Plate Horn, Metal Tube | 8 |
| F735-505 | Nut, Nylon Lock 1/2″ – BLACK | 16 |
| F735-506 | Washer, Spring 3/8″ – BLACK | 8 |
| F735-507 | Bolt, Hex Head 1/2″ x 4-1/2″ – BLACK | 4 |
| F735-508 | Bolt, Hex Head 1/2″ x 3-1/4″ – BLACK | 4 |
| F735-509 | Bolt, Hex Head 1/2″ x 2-1/2″ – BLACK | 8 |
| F735-510 | Bolt, Hex Head 3/8″ x 1-1/4″ – BLACK | 8 |
| Part # | Detailed Parts List | QTY |
| --- | --- | --- |
| F735-511 | Washer, Flat 1/2″ – BLACK | 32 |
| F735-512 | Washer, Flat 3/8″ – BLACK | 8 |
| F735-513 | Nut, Thin, M8 for Adj. Foot – BLACK | 2 |
| F735-514 | Adjustable Foot, for Lower Base Frame | 2 |
| F735-515 | End Plug, Rectangular | 4 |
| F735-516 | Oly Plate Holder, Plastic Sleeve | 8 |
F735-517
| Oly Plate Holder, Plastic End Cap –
Round
|
8
F735-518| Oly Plate Holder, Rubber Cushion| 8
F735-519
| Screw, Hex Recessed Flat Head 3/8″ x
1-1/4″ – BLACK
|
8
References
- F730 Power Rack for Free Weights
- F735 Plate Rack Option for RFT Pro, RFT, F730 and F430 - BODYCRAFT
- F738 RFT Rack Functional trainer
- Product Registration - BODYCRAFT