BODYCRAFT F734 Band Pegs Attachment Owner’s Manual
- October 30, 2023
- BODYCRAFT
Table of Contents
BODYCRAFT F734 Band Pegs Attachment
Product Information
The F734 Band Pegs Attachment is designed to add versatility to your F730 PRO
(Power Rack) or F738 (RFT PRO) exercise equipment. It comes with four fully
welded cotter pin band pegs that can be installed on either equipment to
enable a wide range of exercises.
The product is accompanied by a detailed parts list that includes part numbers
F734-401 and F734-402, and a base lot number that needs to be filled in. The
product can be registered online at https://www.bodycraft.com/product-
registration/.
- Base Lot Number: _
- Purchased Date: / / __
- Dealer’s Name: __
Please register your products at: https://www.bodycraft.com/product- registration/
Product Usage Instructions
- Identify the F734 Attachment and the relevant exercise equipment (F730 PRO or F738 RFT PRO).
- Align the attachment holes on the F734 with the corresponding holes on the exercise equipment.
- Insert the cotter pins through the holes on both sides of the attachment and secure them in place.
- Repeat the above steps for all four band pegs.
- The F734 Band Pegs Attachment is now ready for use.
Note: Always ensure that the attachment is securely fastened before using it for any exercise. Failure to do so may result in injury or damage to the equipment.
Assembled Parts & Detailed Parts Lists
STEP 1: Installation of the F734 Attachment to an F730 PRO (Power Rack) or F738 (RFT PRO)
INFO
WWW.BODYCRAFT.COM
800-990-5556
SERVICE@BODYCrAFT.COM
References
- Home page - BODYCRAFT
- F730 Power Rack for Free Weights
- F734 Band Pegs Attachments for the RFT Pro and F730 - BODYCRAFT
- F738 RFT Rack Functional trainer
- U1000 Bikes Archives - BODYCRAFT
- Product Registration - BODYCRAFT
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>