BRAYER BR3302 Hair Straightener Instruction Manual
- June 3, 2024
- BRAYER
Table of Contents
BRAYER BR3302 Hair Straightener
DESCRIPTION
- Heating plates
- Body
- Heating plates heating indicator «200 °C»
- Heating plates heating indicator «180 °C»
- Heating plates heating indicator «160 C»
- Battery indicator
- On/offtemperature setting button«O»
- Heating plates lock
- USB connector
- USB cord
- Pouch
SAFETY MEASURES
Thoroughly read through this instruction manual before using the hair straightener and keep it for future reference throughout the whole operation period of the unit. Use the unit for its intended purposes only, as specified in this manual. Mishandling the unit may lead to its breakage and cause harm to the user or damage to his/her property.
- The hair straightener is intended only for straightening of slightly wet and dry hair, do not use the unit for straightening of wet hair or synthetic wigs.
- Charge the battery at the temperature from +5 °C to +35 °C.
- Do not use the unit in places with high temperature and relative humidity more than 80%.
ATTENTION!
Keep the unit dry. Do not immerse the unit into water or any other liquids.
- Do not use the unit in places where aerosols are used or sprayed, and in proximity to inflammable liquids.
- Do not use the unit outdoors.
- Protect the unit from blows, drops, vibrations and other mechanical stress.
- Do not leave the operating hair straightener unattended.
- Switch the unit off during intervals in operation or when you are not using it.
- Do not use the unit while taking a bath.
- Do not use the unit when you are drowsy.
- During the operation, hold the unit at handle area only, do not touch the heating plates.
- Avoid contact of hot surfaces with your face, neck and other parts of your body.
The heating plates remain hot for some more time after the unit is switched off. Be careful!
- Do not allow children to use the unit as a toy.
- This unit is not intended for usage by children.
- During the unit operation and the breaks between the operation cycles, place the unit out of reach of children and disabled persons.
- The unit is not intended for usage by physically or mentally disabled persons (including children) or by persons lacking experience or knowledge if they are not under supervision of a person who is responsible for their safety or if they are not instructed by this person on the usage of the unit.
- Be especially careful if children or disabled persons are near the operating unit.
- For children safety reasons do not leave polyethylene bags used as a packaging unattended.
- Do not repair the unit by yourself. Do not disassemble the unit by yourself; in case of any malfunction or if the unit is dropped, switch it off and apply to the service center.
- To avoid damages, transport the unit in the original package only.
- Keep the unit in a dry cool place out of reach of children and disabled persons.
THE UNIT IS INTENDED FOR HOUSEHOLD USE ONLY.
BEFORE THE FIRST USE
After unit transportation or storage at negative temperature, unpack it and wait for 3 hours before using.
- Unpack the unit and remove all the packaging materials.
- Keep the original package.
- Check the delivery set.
- Read the safety measures and operating recommendations.
- Examine the unit for damages; if the unit is damaged, do not switch it on.
- Wipe the unit with a clean, slightly damp cloth and then wipe it dry
Battery charging
- Full charging of the rechargeable battery takes 3 hours.
- Full charging of the accumulator battery is enough approximately for 30 minutes of operation.
- You can charge the battery by connecting the unit to the USB connector of your PC or to the power adapter (not included).
- Insert the mini-jack of the USB cord (10) into the connector (9) and the USB connector to the respective slot of the PC or the power adapter, the battery indicator (6) will light up red.
- When the battery is fully charged, the indicator (6) will light up green. Disconnect the USB cord (10) from the charger.
- Notes:
- when the battery is fully charged, the indicator (6) glows green;
- if the battery is discharged for more than 30%, the indicator (6) lights up red;
- when the battery is fully discharged, the indicator (6) will flash red 5 times and the hair straightener will be automatically switched off.
- fully charge the battery before using the unit.
- ATTENTION:
- To prolong the battery operating life, charge it at the temperature not below +5 °C and not above +35 °C.
- If you haven’t used the unit for a month or longer, charge the battery completely before using the hair straightener.
- If the indicators (3, 4, 5) start flashing simultaneously, it means that the unit is malfunctioning. Switch the unit off and apply to the service center.
- e unit off and apply to the service center.
HAIR STRAIGHTENING
- Place the hair straightener on a flat steady heatresistant surface. Make sure that the heating plates and the outer surfaces do not touch fusible and inflammable objects.
- Use the unit on healthy undyed and not permed hair.
- If your hair is dyed or was permed, use the hair straightener rarely.
- Before straightening your hair, wash it with shampoo, wipe with a towel, dry with a hairdryer and comb.
- Put the hair straightener on a flat, steady and heatresistant surface.
- Switch the unit on by pressing and holding the on/off button (7) « » for 2 seconds. The unit will switch on and the indicator (4) «180°С» will start flashing. The heating plates (1) heating temperature «180°С» is set by default.
- When the heating plates (1) heat up to the set temperature, the indicator (4) «180°С» will be glowing constantly.
Note: when switching the unit on for the first time, a smell from the heating element can appear, this is normal and it is not covered by warranty.
- If necessary, set the required heating temperature by pressing the button (7) « » «160°С, 180°С, 200°С», the indicators will light up (5 — red, 4 — yellow, 3 — blue).
- When the heating plates reach the set temperature, the indicators (3, 4 or 5) will be glowing constantly.
- Divide hair into locks about 4-5 cm wide.
- Open the hair straightener pressing the lock (8).
- Place a hairlock between the heating plates (1).
- Press the heating plates (1) together with a slight effort and drive them to the tip of the hair lock.
- Straighten all hair locks.
- Cool your hair down before final styling or applying hair spray.
- Avoid contact of the hair straightener’s hot surfaces with your face, neck and other parts of your body.
- After you finish using the unit, press and hold down the on/off button (7) « » for 2 seconds.
- Let the unit cool down.
Note: Never leave the operating hair straightener unattended; if you forgot to switch it off, the hair straightener will be switched off automatically in 15 minutes.
CLEANING AND CARE
- Before cleaning switch the unit off and let it cool down completely.
- Do not immerse the unit into water or any other liquids.
- Wipe the unit with a soft, slightly damp cloth and then wipe it dry.
- Do not use abrasives and solvents to clean the unit body (2) and the operating surface (5).
STORAGE
- Let the unit cool down completely and clean it before taking away for storage.
- For easy storing press the heating plates (1) together and press the lock (8) button.
- Keep the unit in a dry cool place out of reach of children and disabled persons.
DELIVERY SET
- Hair straightener — 1 pc.
- Instruction manual — 1 pc.
TECHNICAL SPECIFICATIONS
- Supply voltage: Rechargeable battery — Li-Ion 3.7 V 2600 mAh
- Rated input power: 3,7 W
- Battery charging time: 3 hours
- Operation time: up to 30 minutes
RECYCLING
To prevent possible damage to the environment or harm to the health of people by uncontrolled waste disposal, after service life expiration of the unit or the batteries (if included), do not discard them with usual household waste, deliver the unit and the batteries to specialized centers for further recycling. To remove the rechargeable battery, unscrew the fastening screws, open the hair straightener body and remove the battery. The waste generated during the disposal of the unit is subject to mandatory collection and consequent disposal in the prescribed manner. For further information about recycling of this product apply to a local municipal administration, a disposal service or to the shop where you purchased this product.
The manufacturer reserves the right to change the design, structure and specifications not affecting general principles of the unit operation, without prior notice.
The unit operating life is 3 years The manufacturing date is specified in the serial number. In case of any malfunctions promptly apply to the authorized service center.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>