Newman Medical SFTW-100 Dicom Option User Guide

: June 15, 2024
: Newman Medical

Table of Contents

SFTW-100 Dicom Option
Setup Instructions
Documents / Resources

SFTW-100 Dicom Option

Thank you for your purchase of Newman Medical’s DICOM option. The setup of this program may involve PACS administrators and IT help of a certain level. To make the process go more smoothly it is necessary to have information gathered for installation. Below is a screen shot of the basic setup and information needed, please contact your PACS administrator or IT professional to gather this information. Newman Medical SFTW-100 Dicom Option - Basic
DICOM setup window DICOM Modality Worklist
Host……………………………………………
Port………………………………………………
Modality……………………………………………
Timeout…………………………………………….
AE Title………………………………………………
Our AE Title………………………………………
DICOM Storage
Host………………………………………………
Port………………………………………………
Modality………………………………………………
Timeout………………………………………………
AE Title………………………………………………
Our AE Title………………………………………………
DICOM Contact name………………………………….
DICOM Contact phone………………………………….
DICOM Contact email……………………………………
Below are instructions for entering DICOM information, running and testing the DICOM connection.

Setup Instructions

Enter the above into the DICOM Setup menu (under EDIT menu). A registration key is necessary to enter setup.
a. If you purchased DICOM as part of your purchase order, this is normally entered at the factory for your convenience.
b. If a window appears requesting a registration key, please contact Newman Medical support.
After entering DICOM information, press ECHO in setup to make sure simpleABI system and PACS Server are communicating.
Exit DICOM setup.
Open any new report (under FILE menu) to get the DICOM menu commands active. A report must be open in order to access DICOM menu commands under FILE menu.
From the file menu select Query worklist.
a. The first time simpleABI DICOM runs it prompts to find the QueryPlugin.exe. It is located at one of the following locations, depending on simpleABI version purchased.
i. (600CL/500CL/450CL/400CL) C:\Program Files (x86)\Newman Medical\Simple ABI CL Reporting\NewmanDICOM\QuerryPlugin
ii. (300/250) C:\Program Files (x86)\Newman Medical\Simple ABI Reporting\NewmanDICOM\QueryPlugin
iii. (ABI-Q) C:\Program Files (x86)\Newman Medical\ABIQ\NewmanDICOM\QueryPlugin
simpleABI DICOM subsequently pulling up the worklist signal correct operation.
You can push DICOM image or Structured Report to the PACS server by selecting ‘Store…’ under the file menu.