NEDLANDS GROUP FLS-RC-W Wall Mounted Touch Panel Instruction Manual

NEDLANDS GROUP FLS-RC-W Wall Mounted Touch Panel

Product Information

The FLS-RC-W is a wall-mounted touch panel designed for controlling lighting in a room. It is a 4 zone panel that can control up to 4 different colors. It features a glass touch panel and a color wheel for easy color selection. The panel comes with a wireless remote that has a range of up to 30m and requires MA x 2 batteries. The FLS-RC-W is CE, RoHS, LVD, and RED certified.

Product Usage Instructions

1. Install the FLS-RC-W touch panel on the wall using the included mounting hardware.
2. Connect the panel to your lighting system according to the manufacturer’s instructions.
3. To turn on the lights, press the power button on the touch panel or use the wireless remote.
4. Select the desired zone by tapping the corresponding number on the touch panel.
5. Choose a color by rotating the color wheel on the touch panel or using the color buttons on the remote.
6. Adjust the brightness of the lights by sliding your finger up or down on the touch panel or using the brightness buttons on the remote.
7. To turn off the lights, press and hold the power button on the touch panel or use the remote.

Make sure to replace the batteries in the remote as needed to ensure proper functionality. The FLS-RC-W comes with a warranty, so be sure to contact the manufacturer if you experience any issues with the product.

Model No.: FLS-RC-W
4 Zone/ 1-4 color/Glass touch panel/Color wheel/Wireless remote 30m distance/ MA x 2 battery

Features

• Touch panel 4 zone 1-4 color RF remote.
• Each zone can remote control multiple Skydance’s 2.4G LED controllers
• Ultra sensitive high strength glass touch panel with touch color wheel in the middle
• Smooth and accurate color adjustment by touching the color slide
• Touch keys with chord tones and LED indicator
• Free installation, no wiring, removable
• AAA x 2 battery powered
• White & Black glass panel available.

Technical Parameters

Mechanical Structures and Installations

To fix the panel, two options are offered for selection:

Option l: fix it on the wall with lvvo screws
Option 2: adhere it to the wall with paster

Match Remote Control (two match ways)

Use the controller’s Match key

Match:
Short press match key, immediately press zone key of the touch panel.
The LED indicator fast flash a few times means match is successful.

Delete:
Press and hold match key for 5s to delete all match.
The LED indicator fast flash a few limes means all matched remotes were deleted.

Use Power Restart

Match:
Switch off the power of the receiver, then switch on power again, immediately short press zone key 3 times on the touch panel
The light blinks 3 times means match is successful.

Delete:
Switch off the power of the receiver, then switch on power again,
immediately short press zone key 5 times on the touch panel
The light blinks 5 times means all matched remotes were deleted

Key function

Note: After touch power key to tum off light, long press power key for 5 seconds will tum on or turn off tone.

Safety information

1. Read all instructions carefully before you begin this installation

2. When installing tx:lttery, JXlY attention lo the battery positive and negative JXllarity
   A long time without the remote control, remove the battery.
   When remote distance becomes smaller and insensitive, replace the tx:lttery.

3. If no response from the receiver, please re-match the remote

4. Gently handle remote, beware of falling.

5. For indoor and dry location use only

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>