Cesicia 46814 Traditional 4-Light Bronze Vanity Light with Frosted Glass Shade Instruction Manual
- October 30, 2023
- Cesicia
Table of Contents
46814 Traditional 4-Light Bronze Vanity Light with Frosted Glass Shade
Instruction Manual
ASSEMBLY INSTRUCTIONS
46814 Traditional 4-Light Bronze Vanity Light with Frosted Glass Shade
Inspect the wire insulation for any cuts, abrasions, or exposed copper that
may have resulted during shipping. If there is a defect in the wire, do not
attempt installation.
Before starting installation of this fixture or removal of a previous fixture,
disconnect the power by turning off the circuit breaker or by removing the fuse
at the fuse box.
TOOLS REQUIRED
HARDWARE INCLUDED
*PARTS SHOWN MAY DIFFER SLIGHTLY PER LIGHT FIXTURE
EXPLODED PARTS
INSTALLATION
STEP 1
Unscrew the ball nuts from the mounting unit.
Use the mounting screws to attach the mounting unit to the junction
box.
STEP 3
Make the electrical connection from the junction box to the fixture.
Connect the ground wire to the mounting unit using the preinstalled green
ground screw. Then, connect the positive, negative and ground wires with the
supplied wire nuts. Secure with electrical tape.
ASSEMBLY INSTRUCTIONS (INSTALLATION)
STEP 4
Attach the fixture to the mounting unit through screw holes as shown, and
secure it with ball nuts.
STEP 5
Remove the socket ring from the socket. Attach the Shade onto fixture using
socket ring.
STEP 6
Install bulbs (not included).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>