PassiveBolt PB-9705 Powered Deadbolt Instruction Manual
- October 30, 2023
- PassiveBolt
Table of Contents
KMS INSTALLATION INSTRUCTION
PASSIVEBOLT POWERED DEADBOLT
PREPARE DOOR & INSTALL READER ASSEMBLY
- Prepare door according to template.
- Install reader assembly
- Route wires through door – Do not pinch wires
- Install mounting plate
- Secure with (2) flat head screws.
INSTALL LATCH
- Install latch with cross slot for tailpiece toward bottom.
- Secure with (2) #8 x ¾” combo screws.
INSTALL CYLINDER ASSEMBLY
- Install deadbolt assembly from outside of door.
- Retract deadbolt Left Hand Door – Rotate tailpiece clockwise until it stops in the vertical orientation. Right Hand Door – Rotate tailpiece counter-clockwise until it stops in the vertical orientation.
INSTALL GASKET & INSIDE MOUNTING PLATE
- Install rubber gasket and inside mounting plate and secure with (2) pan head screws.
INSTALL INSIDE TRIM AND BATTERIES
- Make reader connection
- Secure escutcheon with (2) short pan head screws.
- Install batteries and battery cover with pan head screw.
For Mechanical Concerns:
Phone: 866-874-3662
www.pdqlocks.com For Electrical Concerns:
Email: support@passivebolt.com
www.PassiveBolt.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>