PB-9704 Passivebolt Powered Mortise Lock Instruction Manual
- October 30, 2023
- PassiveBolt
Table of Contents
PB-9704 Passivebolt Powered Mortise Lock
Instruction Manual
CHECK HANDING OF LOCK BODY
- If handing of lock body is not correct for opening, consult factory for handing instruction.
INSTALL CHASSIS, TRIM, TURNPIECE & CYLINDER
- Prepare door according to included template.
- Install mortise chassis while feeding chassis wire into hole on inside of door.
- Gently pull wire through hole as chassis is inserted.
- Install trim using included instruction.
INSTALL READER ASSEMBLY
- Feed reader wire through door
- Do not pinch wire
INSTALL INSIDE MOUNTING PLATE ASSEMBLY
- Feed chassis and reader wires through mounting plate.
- Secure with (2) pan head wood/metal screws and (2) machine screws.
- Make wire connection after reader is secure. Push extra wire into door cavity.
INSTALL BATTERY PACK
- Plug in battery wire to control board.
- Install battery pack over two studs on mounting plate.
- Snap battery pack onto retainers on mounting plate.
INSTALL BATTERIES AND BATTERY COVER
- Install batteries and battery cover with (2) black pan head screws.
For Mechanical Concerns:
Phone: 866-874-3662
www.pdqlocks.com
For Electrical Concerns:
Email: support@passivebolt.com
www.PassiveBolt.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>