ALFA AWUS036AX WiFi Adapter User Guide

October 30, 2023
ALFA

ALFA AWUS036AX WiFi Adapter

Product Information

  • Product Name: Unknown
  • Model Number: Unknown
  • Manufacturer: Unknown
  • Product Type: Electronic Device

RF Exposure Information: The product has been tested for SAR (Specific Absorption Rate) using standard operating positions accepted by the FCC. The tests were conducted at the highest certified power level in all tested frequency bands.

Product Usage Instructions

  1. Ensure that the product is charged and turned on.
  2. Place the device in one of the standard operating positions accepted by the FCC.
  3. Use the device in accordance with its intended purpose and instructions provided in the user manual.
  4. Do not use the device while driving or operating heavy machinery.
  5. Avoid using the device in areas with poor reception or high interference.
  6. If you experience any discomfort while using the device, stop using it immediately and seek medical attention if necessary.
  7. Refer to the user manual for more detailed instructions on how to use and maintain the device.

Introduction

AWUS036AX is the 802.11 ax WiFi 6 USB WiFi adapter that supports both 2.4 GHz and 5 GHz. It is simply plug and play to your notebook or desktop computer or projectors to connect to WiFi network for applications such as HD streams, and online gaming. It is compatible with next generation WiFi devices and backward compatible with 802.11 a/b/g/n/ac devices.

Specifications

  • Standards
    • IEEE 802.11 ax
    • IEEE 802.11 ac
    • IEEE 802.11 n
    • IEEE 802.11 g
    • IEEE 802.11 b
    • IEEE 802.11 a
  • Wireless Security
    • WEP, WPA, WPA2, WPA3
  • Operating System
    • Windows 10 / 11
    • Linux kernel 4.19 or later
  • Wireless Data Rate
    • 2.4 GHz: up to 573.5 Mbps
    • 5 GHz: up to 1201 Mbps

Hardware installation

  1. Insert to the laptop/PC USB portALFA-AWUS036AX-WiFi-Adapter-1
  2. Or with AUSBC-D32 (USB extension cord base)
    Note: the USB extension base needs to be purchased separatelyALFA-
AWUS036AX-WiFi-Adapter-2

Driver installation

Download the driver from https://info.alfa.com.tw/awus036axdriver, and connect the AWUS036AX to a USB port on your Windows 10/11 computer, unzip the downloaded driver, double-click the Setup.exe, and then follow the installation setupALFA-AWUS036AX-WiFi-Adapter-3.

Network connection settings

  • Click the wireless network icon in the lower right corner.
  • The computer will display the connectable wireless; click the wireless network you want to connect to and enter the password to connectALFA-AWUS036AX-WiFi-Adapter-4

FCC Compliance Notice

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device. pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Information

SAR tests are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands Before a new device is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the exposure limit established by the FCC, Tests for each device are performed in positions and locations as required by the FCC. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that contains no metal and that positions the device a minimum of 5mm from the body.
Non-compliance with the above restrictions may result in a violation of RF exposure guidelines.

©2022 ALFA NETWORK Inc. All right reserved. ALFA NETWORK are trademarks of ALFA NETWORK Inc. registered in US, Europe, and other countries. Other product and company names mentioned herein may be trademarks other
respective companies.

Learn More
Visit https://www.alfa.com.tw for more information.
RoHS A

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals