ALFA FORNI ACKITHYB2P3P Kit Hybrid In Stainless Steel User Manual
- October 30, 2023
- Alfa Forni
Table of Contents
KIT HYBRID
user manual
WATCH THE VIDEO, SCAN THE QR CODE
alfaforni.com/kit-hybrid.php
WARNING
- The Hybrid Kit is for outdoor use only; in a closed space, it must ALWAYS be connected to a chimney flue.
- You can light the gas burner even after using the oven with firewood.
- Clean the oven floor carefully before taking the lid off the Hybrid Kit to keep ash or food residue from clogging the burner holes.
- We strongly advise against burning wood and gas at the same time because:
- The combustion residue could obstruct and damage the burner holes.
- The key to maximising combustion in Alfa ovens is to use only one fuel at a time, so burn either gas or firewood.
The kit components
The kit is entirely made of AISI 441 stainless steel resistant to high temperatures. It comes with a wood rack (A) and a lid (B) that protects the burner from combustion residue.
Instructions for use
- Shut off any gas source near the oven.
- When the oven is cold, cover the burner with the special lid supplied with the kit.
• For positioning (fig. 1):
- The lid has a side slit where you can fit the peel.
- Push the peel into the slit and put the lid onto the gas burner, slide the lid until it touches the combustion chamber.
-
WARNING: Remove the lid with the help of the peel and ALWAYS when the oven is cold.
-
Place the wood rack on the oven floor on the opposite side from the gas burner;
-
NEVER put the fire on the gas burner.
-
Light the fire on the wood rack in the centre of the oven floor. (fig. 2)
-
Move the fire across from the gas burner and cook as if it were a wood-burning oven. (fig. 3)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>