ProRunner X4 Fold Treadmill Instruction Manual

ProRunner X4 Fold Treadmill

X4 Treadmill Product Information

The X4 Treadmill is a piece of fitness equipment designed for in-home use. It is important to read the instruction manual carefully before installation and operation. The product may vary slightly from the item pictures due to model upgrades.

Important Safety Instructions

• Regular maintenance is necessary to prolong the useful life of the treadmill. Failing to do so may void the warranty.
• Do not attempt to disable the grounded plug, use improper adapters or modify the cord set.
• Install the treadmill on a flat level surface with access to the correct voltage and frequency, grounded outlet.
• Do not operate the treadmill on deeply padded, plush or shag carpet.
• Provide a minimum of 1-meter clearance between the rear of the treadmill and any fixed object.
• Never allow children on or near the treadmill.
• When running, make sure the plastic clip is fastened on your clothing for safety.
• Keep hands away from all moving parts.
• Never operate the treadmill if it has a damaged cord or plugs.
• Keep the cord away from heated surfaces.
• Do not operate where aerosol spray products are being used or where oxygen is being administered.
• Never drop or insert any object into any openings.
• The pulse sensors are not medical devices and may not be entirely accurate.
• Use handrails provided for safety.
• Wear proper shoes for use on the treadmill. High heels, dress shoes, sandals or bare feet are not suitable. Quality athletic shoes are recommended to avoid leg fatigue.
• The treadmill is intended for in-home use only and is not suitable for long-time running.
• Remove the safety key after use to prevent unauthorized treadmill operation.
• Allowed temperature: 5 to 40 degrees Celsius.

Important Electrical Information

• Never use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill.
• Route the power cord away from any moving part of the treadmill including the elevation mechanism and transport wheels.
• Never operate the treadmill on a generator or UPS power supply.
• Never remove any cover without first disconnecting the AC power.
• Never expose the treadmill to rain or moisture. This treadmill is not designed for use outdoors, near a pool, or in any other high-humidity environment.

Product Usage Instructions

1. Install the treadmill on a flat level surface with access to the correct voltage and frequency, grounded outlet.
2. Do not operate the treadmill on deeply padded, plush or shag carpet. Provide a minimum of 1-meter clearance between the rear of the treadmill and any fixed object.
3. Wear proper shoes for use on the treadmill. High heels, dress shoes, sandals or bare feet are not suitable. Quality athletic shoes are recommended to avoid leg fatigue.
4. Insert the power plug into the socket directly.
5. Make sure the plastic clip is fastened on your clothing for safety before running.
6. Use handrails provided for safety.
7. Remove the safety key after use to prevent unauthorized treadmill operation.
8. The pulse sensors are not medical devices and may not be entirely accurate. Use them as exercise aids in determining heart rate trends in general.
9. To disconnect, turn all controls to the off position, remove the safety key, and then remove the plug from the outlet.

Special tips

1. Before installation and operation, please read this operation manual carefully.
2. Please save this manual for future reference.
3. The product may vary slightly from the item pictured due to model upgrades.

IMPORTANT SAFETY INSTRUCTIONS

WARNING – Read all instructions before using this treadmill. It is important your treadmill receives regular maintenance to prolong its useful life. Failing to regularly maintain your treadmill may void your warranty.

Danger–To reduce the risk of electric shock disconnect your treadmill from the electrical outlet
prior to cleaning and/or service work.
DO NOT USE AN EXTENSION CORD: DO NOT ATTEMPT TO DISABLE THE GROUNDED PLUG BY USING IMPROPER ADAPTERS OR IN ANY WAY MODIFY THE CORD SET.

1. Install the treadmill on a flat level surface with access to the correct voltage and frequency, grounded outlet.
2. Do not operate the treadmill on deeply padded, plush or shag carpet. Damage to both carpet and treadmill may result.
3. Do not block the rear of the treadmill. Provide a minimum of 1-meter clearance between the rear of the treadmill and any fixed object.
4. Place your unit on a solid, level surface when in use.
5. Never allow children on or near the treadmill.
6. When running, make sure the plastic clip is fastened on your clothing. It is for your safety, should you fall or move too far back on the treadmill.
7. Keep hands away from all moving parts.
8. Never operate the treadmill if it has a damaged cord or plugs.
9. Keep the cord away from heated surfaces.
10. Do not operate where aerosol spray products are being used or where oxygen is being administered. Sparks from the motor may ignite a highly flammable environment.
11. Never drop or insert any object into any openings.
12. The treadmill is intended for in-home use only and is not suitable for long-time running.
13. To disconnect, turn all controls to the off position, remove the safety key, and then remove the plug from the outlet.
14. The pulse sensors are not medical devices. Various factors, including the user’s movement, may affect the accuracy of heart rate readings. The pulse sensors are intended only as exercise aids in determining heart rate trends in general.
15. Use the handrails provided; they are for your safety.
16. Wear proper shoes. High heels, dress shoes, sandals, or bare feet are not suitable for use on your treadmill. Quality athletic shoes are recommended to avoid leg fatigue.
17. Allowed temperature: 5 to 40 degrees.

Remove the safety key after use to prevent unauthorized treadmill operation.

IMPORTANT ELECTRICAL INFORMATION

WARNING

1. NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. Route the power cord away from any moving part of the treadmill including the elevation mechanism and transport wheels.
2. NEVER operate the treadmill on Generator or UPS power supply.
3. NEVER remove any cover without first disconnecting the AC power.
4. NEVER expose this treadmill to rain or moisture. This treadmill is not designed for use outdoors, near a pool, or in any other high-humidity environment.

IMPORTANT OPERATION INSTRUCTIONS

1. Insert the power plug into the socket directly.
2. The constant running time is less than 2 hours. Be sure to read the entire manual before operating your machine.
3. Understand that changes in speed and incline do not occur immediately. Set your desired speed on the computer console and release the adjustment key. The computer will obey the command gradually.
4. Use caution while participating in other activities while walking on your treadmill; such as watching television, reading, etc. These distractions may cause you to lose balance or stray from walking in the Centre of the belt; which may result in serious injury.
5. In order to prevent losing balance and suffering an unexpected injury, NEVER mount or dismount the treadmill while the belt is moving. This unit starts at a very low speed. Simply standing on the belt during slow acceleration is proper after you have learned to operate this machine.
6. Always hold on to the handrail while making control changes.
7. A safety key is provided with this machine. Removing the safety key will stop the walking belt immediately; the treadmill will shut off automatically. Inserting the safety key will reset the display.
8. Do not use excessive pressure on console control keys. They are precision set to function properly with little finger pressure.
9. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety, Children should be supervised to ensure that they do not play with the appliance.
10. Please consult your doctor at first before running, if you have one of the following diseases:
    • Cardiopathy, hypertension, sugar diabetes, respiratory disease, smoking, and other chronic diseases, complication disease.
    • If you are over 35 years old and heavier than the common weight.
    • Women in pregnant or in the breasting period.
11. Please stop exercising immediately and consult your doctor when you feel giddy, surfeit, thorax ache or other symptoms.
12. Please drink adequate water after taking exercises on our treadmill for more than 20 minutes.

ASSEMBLY INSTRUCTIONS

When you open the carton, you will find the below spare parts

Parts List

NO.

| ****

DES.

| ****

Specification

| ****

Nos.

---|---|---|---
A| Motorized treadmill|  | 1
B| Console assembly|  | 1
C14| Safety key|  | 1
C23| Left bottom cover|  | 1
C24| Right bottom cover|  | 1
E08| Power wire|  | 1

Fixing tools

IMPORTANT ELECTRICAL INFORMATION

WARNING: This treadmill requires the right power source in order to properly operate. For your safety, as well as the safety of others, please verify that the power source is correct before plugging the equipment. Any incorrect power source could cause significant damage to the equipment and or user.
GROUNDING METHODS
This product must be grounded. Grounding provides the least resistance to electrical current and will reduce the risk of electric shock. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. Ensure that the product is connected to an outlet that contains the same configuration as the plug. Do not use an adaptor for this product. This product is for use on a nominal circuit and has a grounding plug that looks like the plug illustrated in Sketch A. Make sure that the product is connected to an outlet having the same configuration as the plug. No adapter should be used with this product.
DANGER
Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a certified electrician if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product. If it will not fit the outlet, have a proper outlet installed by an electrician.

WARNING

1. NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. Route the power cord away from any moving part of the treadmill including the elevationmechanism and transport wheels.
2. NEVER operate the treadmill using a generator or UPS power supply.
3. NEVER remove any cover without first disconnecting the power.
4. NEVER expose the treadmill to rain or moisture. This treadmill is not designed for use outdoors, near pools or in any other high-humidity environment.

OPERATION GUIDE

BUTTON FUNCTIONS

1. START: Press this button to start the machine.
2. STOP//PAUSE: Press this button to pause or stop the machine.
3. PROG: Press this button to choose ”0.0”,” P01-P02-P03-…P14-P15”,” U1-U2-U3”, or” FAT”.
4. MODE： Press this button to choose between time, distance, and calorie workout targets.
5. SPEED +: Press this button to increase the speed.
6. SPEED -: Press this button to reduce the speed.
7. QUICK SPEED: Press 3,6,9,12 to choose speed quickly.
8. QUICK INCLINE: Press 3,6,9,12 to choose incline quickly.

MEDIA HUB

1. BLUETOOTH MUSIC: select SYMK from the list of available devices of cell phones and connect.
   Note: Bluetooth automatically disconnects when answering a call and need to be connected again after the call.

2. USB CHARGING: You can plug in a device to charge via USB.

COMPUTER FUNCTIONS

1. SPEED/PULSE: Display current speed. Press SPEED+/- to adjust the speed of the machine. Displayuser’s heart rate, this date is just for reference, and can not be regarded as medical use. Hold the hand pulse sensor with both hands, the console will show the user’s pulse value after about 5 seconds.

2. TIME/DISTANCE: Display the time has run. Display the distance that has run.

3. INCLINE/CALORIES: Display current incline.Press INCLINE+/- to adjust the incline of the machine.
   Display the calories consumed. When setting mode, the window will display P01-P02-P03….P15

   • U1-U2-U3-FAT.

4. MODE: Press the M button to enter the TIME, DISTANCE, and CALORIES settings.

   • Press SPEED+/- or INCLINE+/- to set the workout target value.
   • Press the START button, the treadmill will run after 3 seconds.
   • Press SPEED+/- and INCLINE+/- to adjust the speed and incline.

5. PROGRAM: Press the PROG button, and you can choose 15 programs,3 users, and body fat.

• Set of 15 built-in programs: From standby mode, press the P button, and the console will show 15 programs, and select between 15 programs.
  • Press SPEED+/- or INCLINE+/- to set the workout time.
  • Each program can be divided into 10 sections; the machine will beep 3 times when starting a new section.
  • Press SPEED+/- or INCLINE+/- to change the speed or incline during each section.
  • The machine will beep 3 times and stop when the program is finished.
    PROGRAM

TIME

| TIME INTERVAL=SETTING TIME/10
---|---
1| 2| 3| 4| 5| 6| 7| 8| 9| 10

P1

| SPEED| 3| 3| 5| 5| 7| 7| 5| 5| 3| 3
INCLINE| 1| 1| 2| 2| 2| 3| 3| 2| 1| 1

P2

| SPEED| 10| 3| 5| 7| 3| 7| 5| 7| 5| 3
INCLINE| 1| 2| 2| 2| 2| 3| 3| 2| 3| 3

P3

| SPEED| 3| 3| 5| 7| 7| 9| 7| 5| 5| 1
INCLINE| 2| 3| 3| 2| 2| 3| 3| 3| 4| 4

P4

| SPEED| 3| 5| 3| 7| 1| 5| 7| 5| 3| 1
INCLINE| 2| 3| 3| 2| 2| 3| 3| 3| 4| 0

P5

| SPEED| 5| 5| 5| 7| 9| 11| 9| 7| 7| 5
INCLINE| 3| 3| 3| 4| 4| 5| 5| 5| 5| 2

P6

| SPEED| 3| 5| 9| 11| 7| 12| 9| 11| 5| 3
INCLINE| 3| 5| 5| 5| 4| 4| 4| 3| 4| 2

P7

| SPEED| 3| 7| 9| 11| 9| 9| 9| 7| 5| 5
INCLINE| 4| 4| 4| 4| 3| 3| 6| 6| 8| 3

P8

| SPEED| 5| 5| 9| 9| 11| 5| 11| 11| 5| 3
INCLINE| 4| 5| 5| 5| 6| 6| 6| 7| 10| 3

P9

| SPEED| 2| 5| 5| 8| 8| 4| 6| 3| 3| 2
INCLINE| 5| 5| 5| 6| 6| 6| 4| 4| 8| 2

P10

| SPEED| 2| 3| 4| 6| 7| 5| 5| 6| 7| 3
INCLINE| 5| 6| 6| 6| 7| 5| 8| 8| 5| 3

P11

| SPEED| 3| 4| 5| 9| 5| 9| 5| 5| 6| 3
---|---|---|---|---|---|---|---|---|---|---|---
INCLINE| 3| 6| 5| 3| 5| 3| 5| 5| 4| 2

P12

| SPEED| 1| 2| 3| 10| 7| 7| 10| 5| 4| 3
INCLINE| 2| 5| 5| 3| 5| 5| 3| 3| 6| 2

P13

| SPEED| 1| 1| 3| 5| 5| 5| 9| 3| 1| 1
INCLINE| 5| 5| 8| 8| 8| 3| 3| 7| 8| 0

P14

| SPEED| 3| 4| 7| 3| 4| 6| 3| 4| 5| 3
INCLINE| 2| 4| 4| 4| 4| 2| 3| 3| 1| 0

P15

| SPEED| 2| 3| 5| 5| 7| 7| 7| 6| 4| 3
INCLINE| 3| 3| 5| 5| 5| 5| 2| 2| 1| 0

• Set of 3 users’ programs: From standby mode, press the PROG button, and the console will show 3 users’ programs, select between 3 users’ programs.
  • Press SPEED+/- or INCLINE+/- to set the workout time.
  • Each program can be divided into 10 sections; the machine will beep 3 times when starting a new section.
  • Press SPEED+/- or INCLINE+/- to change the speed or incline during each section.
  • The machine will beep 3 times and stop when the program is finished.
• Set of body fat test: From standby mode, press the PROG button until you get to FAT.
  • Press the M button to enter information. Set value with SPEED+/- or INCLINE+/- from F-1 to F-4(F-1 GENDER, F-2 AGE, F-3 HEIGHT, F-4 WEIGHT)
  • Press the M button to enter F-5(F—5 BODY FAT TEST), and hold your hands on the hand pulse sensor, the console will display your body fat value after 3 seconds.
  • The body fat value is intended as a guide, and is not medical data:

F-5

| FAT| ≤19| Underweight
FAT| =(20—25)| Normal weight
FAT| =(26—29)| Overweight
FAT| ≥30| Obesity

LUBRICATION REMIND FUNCTION
This machine has a lubrication reminder function. After every total running distance of 300km (188 miles), your treadmill needs to be maintained with oil. The system will remind with a sound every 10 seconds, and a window will show “OIL”. This means that your treadmill needs to be lubricated with oil. Please read the user’s manual first, and add the oil to the middle part of the running board. After you finish lubrication, please hold on “STOP” button for 3 seconds, and the system warning sound will disappear.

SAFETY LOCK FUNCTION
Under any mode, if you pull away the safety key, the machine will stop. The window will show “—” with a reminding sound. The machine cannot work until the safety key is inserted back.

POWER SAVE FUNCTION
The machine is with energy saving function. Under standby mode, at the state of waiting for an operation,if without any operation, the saving on power function will be available after 10 minutes, and the display willbe closed up. You can press any button to turn on the display.

POWER ON （ ）AND POWER OFF（ ）

Switch off the power: You can switch off the power to stop the treadmill, which won’t be damaged at any time.

CAUTION

1. We recommend that you maintain a slow speed at the beginning of a session and hold on to the handrails until you become comfortable and familiar with the treadmill.
2. Attach the magnet end of the safety pulling rope to the computer and also attach the clip of the safety pulling rope to your clothing.
3. To end your workout safely, press the STOP button or pull out the safety pulling the rope, then the treadmill will stop immediately.

MAINTENANCE & CARE

• General cleaning will help prolong the life and performance of your treadmill. Keep the unit clean and maintained by dusting the components on a regular basis. Clean both sides of the running belt to prevent dust from accumulating underneath the belt. Keep your running shoes clean so that dirt from your shoes does not wear out the running board and belt.
• Clean the surface of the running belt with a clean damp cloth.
• To better maintain the treadmill and prolong its life it is suggested that the machine be powered off for 10 minutes every 2 hours and fully powered off whenever not in use.
• A loose Running Belt will result in the runner sliding off when running, while too tight of a running Belt will result in a decrease to the performance of the motor and also create more friction between the roller and running belts. The most suitable tightness for the belts is pulled out 50-75mm from the Running Board.

CENTERING THE RUNNING BELT
Place the treadmill on level ground and set it at 6-8kph to check if the Running Belt drifts.

1. If the Running Belt moves to the right, turn the adjusting bolt on the right side ¼ turn clockwise, then turn the left adjustment bolt ¼ turn counter-clockwise. If the belt does not move, repeat this step until it centers. Refer to Figure A.
2. If the Running Belt moves to the left, turn the adjusting bolts on the left side ¼ of a turn clockwise, then turn the right adjustment bolt ¼ turn counter-clockwise. If the belt does not move, repeat this step until it centers. Refer to Figure B.
3. Over time the Running Belt will loosen. To tighten the belt turn the Left & Right side adjustment bolts one full turn clockwise, and check the tension of the belt. Continue this process until belt is at the correct tension. Make sure to adjust both sides equally to ensure correct belt alignment. Refer to figure C.

LUBRICATING THE TREADMILL

IMPORTANT NOTE
You will need to lubricate your treadmill before the first use.
RUNNING BELTS & TREADMILL LUBRICANT
Lubricating the running board and running belt is essential as the friction between the two affects the life span and function of the treadmill, therefore it is suggested that the running board and belt be inspected regularly.
WARNING: Always unplug the treadmill from the electrical outlet before cleaning, lubricating or repairing the unit.

HOW TO LUBRICATE

1. Raise the belt up on one side and apply lubricant to the running deck. Use a rag to thoroughly wipe the lubricant over the running deck. Repeat this process for the other side.
2. The moving parts should turn freely and quietly. The abnormality of moving parts will affect the safety of the equipment. Inspect and tighten bolts regularly.
3. To better maintain the treadmill and prolong its lifespan, it is suggested that maintenance be done on a regular basis.

The following timetable is recommended

• Light user (less than 3 hours/ week) every six months
• Medium user (3-5 hours/ week) every three months
• Heavy user (more than 5 hours/ week) every two months

EXPLODED DRAWING 1

EXPLODED DRAWING 2

PARTS LIST

No.| Part description| Remark| Qty| No.| Part description| Remark| Qty
---|---|---|---|---|---|---|---
A01| Bottom frame|  | 1| C25| Cylindrical cushion|  | 2
A02| Main frame|  | 1| C26| Button|  | 2
A03| Console frame|  | 1| C27| Button +|  | 1
A04| Left upright tube|  | 1| C28| Button –|  | 1
A05| Right upright tube|  | 1| C29| Incline hand pulse seat|  | 1
A06| Incline frame|  | 1| C30| Speed handpulse seat|  | 1
B01| Front roller|  | 1| C31| Button acrylic|  | 1
B02| Rear roller|  | 1| D01| Nut| M6| 6
B03| Safety key seat shrapnel|  | 2| D02| Nut| M8| 8
B04| Left handpulse sheet|  | 2| D03| Nut| M10| 6
B05| Right handpulse sheet|  | 2| D04| Bolt| M1055  L20| 4
B06| Air cylinder|  | 1| D05| Bolt| M855| 4
B07| Incline frame sleeving|  | 8| D06| Bolt| M840 L20| 4
B08| Wrench with screwdriver| S=13、14、15| 1| D07| Bolt| M830 L15| 1
B09| #5 Allen wrench| 5mm| 1| D08| Bolt| M825| 2
B10| Speaker net|  | 1| D09| Bolt| M815| 6
C01| Motor top cover|  | 1| D10| Bolt| M1045 L15| 1
C02| Motor bottom cover|  | 1| D11| Bolt| M665| 2
C03| Left rear cover|  | 1| D12| Bolt| M655| 1
C04| Right rear cover|  | 1| D13| Bolt| M635| 6
C05| Cushion|  | 2| D14| Big flat washer| φ6φ121.0| 8
C06| Side rail|  | 2| D15| Bolt| M512| 7
C07| Console top cover|  | 1| D16| Bolt| M510| 4
C08| Console bottom cover|  | 1| D17| Screw| ST4.240| 3
C09| Left-hand rail foam|  | 1| D18| Screw| ST4.220| 8
C10| Right handrail foam|  | 1| D19| Screw| ST4.212| 13
C11| iPad holder|  | 2| D20| Screw| ST4.212| 20
C12| Running belt|  | 1| D21| Bolt| M1095 L25| 1
C13| Motor belt|  | 1| D22| Screw| ST2.98| 8
C14| Safety key|  | 1| D23| Screw| ST2.56| 4
C15| Blue cushion|  | 6| D24| Lock washer| Φ8| 10
C16| Transportation wheel|  | 2| D25| Lock washer| Φ10| 6
C17| Square end cap|  | 4| D26| Flat washer| Φ8| 2
C18| Adjustable wheel|  | 2| D27| Bolt| M855 L20| 2
C19| Footpad|  | 4| D28| Spring washer| Φ8| 2
C20| Console acrylic|  | 1| D29| Lock washer| Φ8| 3
C21| Ring protector plug|  | 2| E01| Running board|  | 1
C22| EVA PAD| M6| 1| E02| DC motor|  | 1
C23| Left bottom cover| M8| 1| E03| Square switch|  | 1
C24| Right bottom cover| M10| 1| E04| Overload protector|  | 1
E05| Socket|  | 1| E23| Quick speed upper wire|  | 1
 |  |  |  |  |  |  |
---|---|---|---|---|---|---|---
E06| Magnet ring|  | 1| E24| Quick incline bottom

wie

|  | 1
E07| Magnet core|  | 1| E25| Quick incline upper

wire

|  | 1
E08| Power wire|  | 1| E26| Incline motor|  | 1
E09| AC single wire| L200 brown| 1| F01| Filter| ****

optional parts

| 1
E10| AC single wire| L350 brown| 2| F02| Inductance| 1
E11| AC single wire| L350 blue| 2| F03| AC single wire| 1
E12| Grounding wire| Yellow&green| 1| F04| Grounding wire| 1
E14| Upper control board|  | 1| F05| Screw| 4
E15| Lower control board|  | 1| H01| USB module| 1
E16| Signal upper wire|  | 1| H02| USB wire| 1
E17| Signal bottom wire|  | 1| H03| Screw| 4
E18| Hand pulse upper wire|  | 1| G01| Speaker|  | 2
E19| Handpulse bottom wire|  | 1| G02| MP3 wire|  | 1
E20| Touch button|  | 2| G03| Screw|  | 8
E21| Safety key connection wire|  | 1| G04| Audio signal input wire|  | 1
E22| Quick speed bottom wire|  | 1|  |  |  |

TROUBLESHOOTING

The treadmill will not start

| ****

Not plugged in

| ****

Plug the cord into an outlet

Safety Key not inserted| Insert Safety Key

Running belt is not centered

| Running belt tension is not correct on the left or right sides of the running board| Tighten the adjustment bolts on the left and right sides of the rear roller

Computer not working

| Wires from the computer and bottom control board are not properly connected.| Check wire connections from the computer to the control board.

Transformer is damaged

| If the transformer is damaged, contact customer service.

E01 or E13: Message failure

| ****

Wires from the computer and bottom control board are not properly connected.

| Check wire connections from the computer to the control board. If the wire has been punctured or damaged, you will need to replace it.

If the problem is not rectified, you may need to replace the control board.

E02: Burst clash protection

| ****

The incoming voltage is lower than 50% of the required voltage.

| Check that the incoming power supply is the correct voltage.

Check the control board, and replace it if damaged.

Check the motor, and replace it if damaged.

E05: Current overload protection (Self Protecting System)

| The incoming voltage is too low or too high. The

control board is damaged.

| Restart the treadmill.

Check the incoming voltage to ensure it’s correct.

---|---|---

A moving part of the treadmill is stuck and therefore the motor is unable to rotate properly.

| Inspect moving parts of the treadmill to ensure that they are operating correctly.

Check the motor, listen for strange noises, and check for a burning smell. Replace the motor if necessary.

Check the control board, and replace it if damaged.

Lubricate the treadmill.

E06: Motor Abnormality

| ****

The motor wire is not connected or the motor is damaged.

| Check motor wires to see if the motor is connected.    If the wire has been punctured or damaged, you will need to replace it.    If the problem is not rectified, you may need to replace the motor

E08: Control Board Abnormality

| ****

The control board is not connected.

| Check the upper and middle wires to see if the control board is connected. If the wire has been punctured or damaged, you will need to replace it.    If the problem is not rectified, you may need to replace the control board.

E10:Motor Abnormality

| ****

The motor is damaged or a moving part of the treadmill is stuck and therefore the motor is unable to rotate properly.

| The torque is too big, please adjust the torque to be smaller.

Inspect moving parts of the treadmill to ensure that they are operating correctly.

Replace the motor if necessary.

Lubricate the treadmill.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>