PULiTE HBI Series Light Duty Stainless Steel Horizontal Multi-Stage Centrifugal Pumps Instruction Manual
- October 30, 2023
- PULiTE
Table of Contents
PULiTE HBI Series Light Duty Stainless Steel Horizontal Multi-Stage
Centrifugal Pumps
Disassembly of shaft seal
Necessary tools: hexagon, Phillips, flathead screwdriver, box wrench, universal pliers
- Step1: use hexagon wrench turn on the screw of strap, take out the strap
- Step2: use flat head screwdriver take out the pump chamber
- Step3: take out the pump chamber and suction pipe
- Step4: take out the screw of the strap, and take out the strap retainer
- Step5: take out the chamber
- Step6: use Phillips screwdriver to take out the screw of fan cover, and take out the fan cover
- Step7: use flathead screwdriver take out the fan, take out the fan
- Step8: use universal pliers to clamp the end of motor spindle
- Step9: grasp the universal pliers, use box wrench take out the lock nut
- Step10: take out the clamp
- Step11: take out the impeller
- Step12: take out the chamber
- Step13: take out the spacing pipe and impeller
- Step14: take out the chamber (upper)
- Step15: take out the bushing and spring
- Step16: take out the O-ring
- Step17: use hands take out the rotation of the ring, use flat head screwdriver take out the fixed ring Disassembly complete
Assembly of shaft seal manual
Necessary tools: hexagon, Phillips, flathead screwdriver, box wrench, universal pliers
- Step1: put the fixed ring into the set base of shaft seal and put the rotation of the ring into it
- Step2: put O-ring in it (put it on the bottom)
- Step3: put the bushing and spring in it
- Step4: put the impeller first and put the chamber (upper) on it
- Step5: put the impeller in it, then put the spacing pipe in it
- Step6: put the chamber in it
- Step7: put the impeller in it
- Step8: put the clamp in it
- Step9: use universal pliers to clamp the end of motor spindle
- Step10: put the lock nut on it and grasp the universal pliers Use box wrench to lock the nut
- Step11: use hammer to beat the fan into it
- Step12: use Phillips screwdriver to lock the fan cover
- Step13: put the chamber on it
- Step14: lock the strap retainer
- Step15: install the suction pipe
- Step18: install the pump chamber
- Step19: use a hexagon wrench to lock the strap Assembly complete
PULITE ENTERPRISE CO., LTD. NO.33-5, Yongchun Rd., Nantun Dist. Taichung City 408015, Taiwan(R.O.C)
- Phone: +886-2389-8659
- Fax: +886-2389-7477
- Email: pulite@m168.com.tw
- http://www.pulite.com.tw/
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>