TOORX WLX-6500 Multipower Malta Instructions
- October 30, 2023
- TOORX
Table of Contents
TOORX WLX-6500 Multipower Malta
Product Information
This product is a strength training machine with a ClassS Maximum Weight Capacity of 200kg/440IBS and a Maximum User Weight of 135kg/297IBS. The product’s total surface is 1468*600, and the product’s total mass is 260kg/572IBS. The product comes with a training area and a free area. The equipment needs to be examined regularly for damage and wear, such as ropes, pulleys, and connection points. The components most susceptible to wear should be given special attention. Defective components should be replaced immediately and/or kept out of use until repair. Regular maintenance is required according to the chart provided in the manual.The product comes with an installation sketch map to help make assembly easier. The user should read the details and instructions before installing. All parts should be installed according to the illustration indication, and installation work can be finished by two men. All parts should be identified by the part identify chart.
Product Usage Instructions
- Choose the installed place near the desired station that has enough space to exercise.
- All parts can be put on the clear area, then back out of the wrapper. The wrapper cannot be thrown away before installation is finished.
- Screw the bolt tightly except for the additional instruction.
- All parts must be installed according to the illustration indication.
- Identify all parts by part of identify chart.
- For assembly, use the following tools: 1. M6 Hex spanner, 2. M10 Hex spanner, 3. Two 13-16 spanner, 4. Two 17-19 spanners.
Follow Steps 1-3 provided in the manual to assemble the product. Step 1 involves connecting and attaching various components. Step 2 involves attaching welding groups and lock nuts. Step 3 involves attaching safety hooks and rollers.
Training Area and Free Area
Specifications
- Class： S
- Maximum Wt. Capacity：200kg /440IBS
- Maximum User Weight： 135kg/297IBS
- Product Total Surface： 1468*600
- Product Total Mass： 260kg/572IBS
REGULAR MAINTENANCE
- The safety level of the equipment can be maintained only if it is examined regularly for damage and wear, e.g. ropes, pulleys, and connection points;
- Pay special attention to components most susceptible to wear.
- Replace defective components immediately and /or keep the equipment out of use until repair;
- This equipment should carry on regular maintenance according to the following chart:
| MAINTENANCE | EVERYDAY | EVERY WEEK | THREE MONTHS |
|---|---|---|---|
| Check: connecting, bolt, Weight stack bolt |
√
| |
Clearance: cushion and cover| √| |
Lubrication: place of sliding| | | √
Check:
bolt if tighten
| | √|
Lubrication: Bracket of bearing| | | √
INSTALL SKETCH MAP
Let assembly become easier All the content of user’s manual is to assured the strength training machine can be installed more easily Reading the details and instructions before installing:
- Because the size and is weight of equipment is so large, Please choose the installed place near the desired station and assured there IS enough space to exercise
- All parts can be put on the clear area, then backout the wrapper. And the wrapper can’t be through away before installation finished.
- Screw the bolt tightly except the additional instruction
- All parts must be installed according the illustration indication.
- Installation work can be finished by tow men
- Identify all parts by part identify chart
Assembly Step
Use tool:
- M6 Hex spanner
- M10 Hex spanner
- Two 13-16 spanner
- Two 17-19 spanner
INSTALLATION
GARLANDO SPA
- Via Regione Piemonte, 32 – Zona Industriale D1
- 15068 – Pozzolo Formigaro (AL) – Italy
- www.toorx.it.
- info@toorx.it.