TOORX WBX2200-GB Adjustable Strength Training Leg Instructions
- June 13, 2024
- TOORX
Table of Contents
TOORX WBX2200-GB Adjustable Strength Training Leg
Training Area and Free Area
Specifications
Class: S
Maximum Wt. Capacity: 135kg/297IBS
Maximum User Weight: 135kg/297IBS
Product Total Surface: 1512.7*649mm
Product Total Mass: 55kg/121IBS
REGULAR MAINTENANCE
- The safety level of the equipment can be maintained only if it is examined regularly for damage and wear, e.g. ropes, pulleys, connection points;
- Pay special attention to components most susceptible to wear.
- Replace defective components immediately and /or keep t he equipment out of use until repair;
MAINTENANCE| EVERYDAY| EVERY WEEK| THREE MONTHS
---|---|---|---
Check: connecting, bolt, Weight stack bolt| √| |
Clearance: cushion and cover| √| |
Lubrication: place of sliding| | | √
Check: bolt if tighten| | √|
Lubrication: Bracket of bearing| | | √ - This equipment should carry on regular maintenance according to the following chart:
INSTALL SKETCH MAP
Let assembly become easier
All the content of user’s manual is to assured the strength training machine
can be installed more easily.
Reading the details and instructions before installing:
- Because the size and weight of equipment is so large, Please choose the installed place near the desired station and assured there is enough space to exercise
- All parts can be put on the clear area, then back out the wrapper. And the wrapper can’t be through away before installation finished.
- Screw the bolt tightly except the additional instruction
- All parts must be installed according the illustration indication.
- Installation work can be finished by tow men
- Identify all parts by part identify chart
Assembly Step
Use tool：
- M6 Hex spanner
- Two 17-19 spanner
Step.1
| NO. | Name | Specification | Qty |
|---|---|---|---|
| 01 | Main Frame | 1 | |
| 02 | back plate assembly | 1 | |
| 03 | seat frame assembly | 1 | |
| 04 | ground tube assembly | 1 | |
| 05 | seat frame adjustable assembly | 1 | |
| 06 | back plate adjustable assembly | 1 | |
| 07 | washer | M8 | 4 |
| 23 | semicircle head screws hexagon | M8*20L | 4 |
| 13 | hexagon bolt | M12*25L | 2 |
| 14 | washer | M12 | 2 |
| 26 | washer | M10 | 4 |
| 27 | semicircle head screws hexagon | M10*25L | 4 |
Step.2
| NO. | Name | Specification | Qty |
|---|---|---|---|
| 24 | seat cushion | 1 | |
| 29 | back cushion | 1 | |
| 11 | washer | M8 | 8 |
| 25 | semicircle head screws hexagon | M8*25L | 8 |
Adjust Instructions
Seat and Back Height Adjustment
- Pull out the adjustable handle, adjust seat and back cushion to suitable position, and loosen the handle
- After finish adjusting, please ensure that the bolt of the adjustable handle is inserted to pin hole completely before using the equipment.
Customer Support
GARLANDO SPA
Via Regione Piemonte, 32 – Zona Industriale D1
15068 – Pozzolo Formigaro (AL) – Italy
www.toorx.it – [email protected]
References
Read User Manual Online (PDF format)
Loading......