PITTSBURGH 63615 Digital Angle Gauge Owner’s Manual

PITTSBURGH 63615 Digital Angle Gauge

Product Information

The Digital Angle Gauge is a precision measuring instrument used for measuring angles. It is a compact and portable device that can be used to measure angles accurately. The product comes with an owner’s manual and safety instructions that provide information on assembly, operating, inspection, maintenance, and cleaning procedures. The product has a serial number that should be written at the back of the manual for future reference.

The product requires button/coin batteries that should be installed correctly according to polarity (+ and -). The batteries should not be disposed of in household trash and should be immediately disposed of after use. Non- rechargeable batteries are not to be recharged.

The product should only be used as intended, and users should maintain a safe working environment. The Digital Angle Gauge is a precision measuring instrument that should not be handled roughly or used when tired or under the influence of alcohol, drugs, or medication. People with pacemakers should consult their physician(s) before use.

Product Usage Instructions

1. When unpacking the product, ensure that it is intact and undamaged. If any parts are missing or broken, call 1-888-866-5797 as soon as possible.
2. Read the entire IMPORTANT SAFETY INFORMATION section before setting up or using the product.
3. Remove the pull tab before use.
4. Push in the ON/OFF button to turn the unit on.
5. Place the measuring surface of the Digital Angle Gauge on a flat-level surface to calibrate it. A tabletop that is parallel to the floor will work.
6. Push the Calibrate button to reset the unit to 0.
7. Inspect the product before every use and do not use if parts are loose or damaged.
8. Keep bystanders out of the area and maintain a safe working environment.
9. Do not use the product in a damp or wet location.
10. After use, immediately dispose of the batteries and keep them away from children. Do not dispose of batteries in household trash.

Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

Visit our website at: http://www.harborfreight.com Email our technical support at: productsupport@harborfreight.com.

When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-888-866-5797 as soon as possible.

Copyright© 2023 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.

Warning:
Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL.

Specifications

Important Safety Information

1. Use as intended only.
2. Maintain a safe working environment. Keep the work area clean and well-lit. Make sure there is adequate surrounding workspace. Do not use this product in a damp or wet location.
3. Keep bystanders out of the area.
4. Inspect before every use; do not use if parts are loose or damaged.
5. The Digital Angle Gauge is a precision measuring instrument. Do not drop or handle roughly. Do not use when tired or when under the influence of alcohol, drugs or medication.
6. People with pacemakers should consult their physician(s) before use. Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure.
7. Maintain product labels and nameplates. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement.

Button/Coin Battery Warnings

WARNING

INGESTION HAZARD:
This product contains a button cell or coin battery.

This symbol means:
INGESTION HAZARD: This product contains a button cell or coin battery.

1. Immediately dispose of used batteries and keep them away from children. Do NOT dispose of batteries in household trash.
2. Even used batteries may cause severe injury or death.
3. Call a local poison control center for treatment information.
4. Do not mix old and new batteries, different brands, or types of batteries, such as alkaline, carbon-zinc, or rechargeable batteries.
5. Ensure the batteries are installed correctly according to polarity (+ and -).
6. Remove and immediately discard batteries from equipment not used for an extended period of time.
7. Non-rechargeable batteries are not to be recharged.
8. Do not force discharge, recharge, disassemble, heat above 104°F, or incinerate. Doing so may result in injury due to venting, leakage or explosion resulting in chemical burns.

Operating Instructions

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before setting up or use of this product.

1. Remove the pull-tab before use.
2. Push in the “ON/OFF” button to turn the unit on.
3. Place the measuring surface of the Digital Angle Gauge on a flat-level surface to calibrate it. A tabletop that is parallel to the floor will work. Push the “Calibrate” button to reset the unit to 0. See “below.
4. To find the angle of an item, simply place the measuring surface of the Digital Angle Gauge flat against the surface you want the angle of. The angle will appear in the digital display. If the angle of you are measuring changes, the reading on the display will also change.
5. To freeze or save that reading, push the “HOLD” button.
6. Push “0%” to find the percentage of angle change from the initial measurement.

Battery Replacement

1. Remove the screw(s) and open the battery compartment.
2. Remove batteries and dispose of them properly.
3. Install three 3-Volt, CR2032 batteries in the correct polarity.
4. Close the compartment and replace the screw(s).

Record Serial Number Here:

• Note: If the product has no serial number, record the month and year of purchase instead.
• Note: Replacement parts are not available for this item. Refer to UPC 193175510235.

Limited 90-Day Warranty

Harbor Freight Tools Co. makes every effort to assure that its products meet high quality
and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.

To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

26677 Agoura Road • Calabasas, CA 91302 • 1-888-866-5797.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>