JFA K600 Long Distance Remote Control User Manual
- October 30, 2023
- JFA
Table of Contents
K600 Long Distance
Remote Control 
USER MANUAL
K600 Long Distance Remote Control
HAPPY!
You have just purchased a JFA quality product
Electronics, which was developed with technology advanced and unique design.
Read the installation instructions carefully and use presented in this manual
PRESENTATION
The K600 control allows you to control the main functions of the player such as change of music and folder, volume, play, pause and power.
OPERATION
Transmitting Unit:
Whenever an o key is pressed, an RF (radio frequency) signal, will be
transmitted to the receiving unit.
Receiving Unit:
The “led action” will light up indicating the presence of the received signal,
and will transmit in IR (infra red) the code corresponding to the key pressed.
The receiver can operate with two transmitters, to do this, perform steps 1
and 2 of the item “CODING THE CONTROL” for the new transmitter.
IMPORTANT NOTES
- The control panel will not work if the coding procedure is not carried out.
- To avoid interference, install the receiver in a location where the antenna is close to the panel and at least 50 cm away from the car alarm receiver.
BASIC INDICATIONS AND COMMANDS
01- Controls volume;
02- Change of music;
03- Change of folder;| 04- Play / Pause;
05- Power / Function (changes to aux, cd, sub, radio, etc.).
---|---
Resection Unit:
01 – RF receiver antenna;
02 – Led action, reception indicator;
03 – 12v power supply (black white stripe) and GND (black).| 04 – Infra-red
emitter (point to the front of the player):
05 – Memory mode key.
---|---
ENCODING THE CONTROL
MEMORY MODE (The receiver has more than 220 models of audio and video devices stored in its memory (see the attached table or on the website: www.jfaeletronicos.com
Control:
- Press the “M” key on the receiving unit (Indication 1), the action LED will be constantly lit;
- Press the keys on the transmitting unit (Indication 2) corresponding to the “olayer” model, as shown in the table, example: If you want to program the SONY cd, perform step 1 and then press the keys in sequence on the control. Check that the led will flash 1 time and then 4 times, indicating that model 14 (Sony) has been programmed.
- After completing this process, press the “M” key on the receiving unit (Indication 1) or wait 10 seconds to exit the memory mode.
| MODEL | CODE | INDICATOR |
|---|---|---|
| AIKON | 43 |
AIKON SRC-UP
ALPINE| | 70
CDE-133BT IVE-W530
AR70| | 5
AR 70
BZ| | 61
BZ-1570 BZ-407 BZ-750
BOOSTER| | 20
BMTV-6850 BMW- 7950
BMTV-7680
BMP-1450USB BMP-2100USB| | 52
BM-7550 BM-7650| | 26
BDVM-8400| | 21
BMP-1250USB| | 53
BDVD-5350UB| | 24
BMTV-9600DVUBT| | 55
BDVM-8340MP| | 56
BDVM-8365MP| | 57
KIT MULTIMIDIA-SRC UP| | 42
BOOSTER 01| | 29
BOOSTER 02| | 28
BOOSTER 03| | 22
CASKA| | 62
CASKA-MULT
CIBER| | 26
CIBER-01
CIBER-02| | 29
CIBER-03| | 30
DOTCOM| | 63
DC-308
DSW AUTOMOTIVE| | 39
DS-8705
GO TO| | 45
GO TO – MODE UP
H-BUSTER| | 68
HBD-7688AV HBD-9200AV
HBD-9150AV HBD-9350AV
HBD-D2000AV HBD-D300AV| | 41
HBD-7900AV| | 47
HBD-8300BT| | 46
HBD-9560DVD| | 44
HBD-9500 HBD-9550AVN HBD-9600AW| | 12
HB-3000| | 03
HB-4000| | 04
HB-5100| | 05
HB-5000 HB-7200| | 06
HB-6000 HB-8100
HB-7100| | 07
HB-8000| | 31
HB-9150| | 10
HB-9700| | 13
HB-9750| | 12
HB-DVD| | 08
JVC| | 02
KD-AR555 KD-R449 KD-R760
KD-AR565 KD-R450 KD-R859BT
KD-AR7/55 KD-R459 KD-R869BT
JVC| | 02
KD-AR/65S KD-R460 KD-R959BT
KD-R209UR KD-R469 KD-R969BT
KD-R219 KD-R519UR KD-X200
KD-R329 KD-R650 KD-X210
KD-R409UR KD-R660 KD-X220
KD-R419 KD-R/729BT KD-X3 10BT
KD-R429 KD-R739BT KD-X320BT
KD-R439 KD-R750
KENWOOD| | 19
DPX502BT KDC-BT955HD KDC-X496
DPX592BT KDC-BT958HD = KDC-X497
DPX/02BH KDC-HD455U KDC-X500
DPX/92BH KDC-MP1045 KDC-X595
KDC-358U KDC-MP1048 KDC-X598
KDC-BT265U = KDC-MP152U) KDC-X599
KDC-BT362U =KDC-MP2045U KDC-X697
KDC-BT365U = KDC-MP2048U KDC-X/00
KDC-BT558U = =KDC-MP2052U KDC-X897
KDC-BT562U = KDC-MP362BI KDC-X898
KDC-BT565U = KDC-MP365BI KDC-X996
KDC-BT6052U = KDC-X300 KDC-X997
KDC-BT765HD KDC-X398 KDC-X998
KDC-BT855U KDC-X399
KDC-BT858U KDC-X494
LENOXX| | 60
AD-1828
| | 75
LCF600UR LCS320UB LCS510IR
LG| | 75
LCF800 LCS321UB LCS7O0OBR
LCS311UR LCS5OOUX
LG1| | 35
MOX| | 64
MO-DVD7/040
NAPOLI| | 67
CDMP-3618 CDMP-6338USB
CDMP-3936| | 69
9000| | 20
9905| | 21
8480| | 22
1950 9981| | 23
4203 4335 5333| | 24
9912 9913| | 25
9975 9485 9486 9985| | 26
9480| | 27
5333 9133| | 28
8787| | 33
NET| | 82
NET-TV
ORBE| | 78
8901
PANASONIC| | 32
PANASONIC-01
PIONNER| | 01
DEH-1480UB DEH-8380SD DEH-X8580BT
DEH-1580UB DEH-P4080UB DEH-X8/780BT
DEH-2280UB DEH-P4180SD MVH-1480UB
PIONNER| | 01
DEH-3180UB DEH-P5080UB MVH-158UI
DEH-3480UB DEH-P5180UB MVH-358BT
DEH-4280SD DEH-X1/80UB MVH-8280BT
DEH-4380UB DEH-X1880UB MVH-8380BT
DEH-5280SD DEH-X3580UI_ = =>.MVH-X178UI
DEH-6280BT DEH-X3780UI =MVH-X378BT
DEH-6380SD DEH-X4880BT =MVH-X568BT
DEH-6480BT DEH-P6080UB DEH-P/880MP
DEH-7380BT DEH-X6580BT DEH-P/980UB
DEH-6980IB DEH-X6/80BT DEH-P9880BT
DEH-8980BT DEH-P/180UB
AVH-2380DVD AVH-P3380BT = AVH-P5280BT| | 49
AVH-5480DVD AVH-P4280DVD AVH-P6380BT
AVH-P3280BT AVH-P4380DVD
AVH-1480DVD AVH-X1580DVD AVH-X7580BT| | 50
AVH-2480BI AVH-X2580BT
DVH-7380AV| | 48
DVH-7580AV DVH-8480AVBT| | 51
DVH-7780AV DVH-8780AVBT
PHILCO| | 59
PCA-530
CD-230| | 16
DVD-500| | 17
PHILIPS| | 18
PHILIPS-01
CE120 CEM210 CEM3000| | 81
CEM2000 CEM220
POSITRON| | 72
SP4300AV SP6700DTV SP8650DTV
SP4310AV SP6O9D0NAV SP8960NAV
SP6300AV SP8330BT
SP6110AV SP6551DTV| | 74
SP6111AV SP6861 NAV
SP6320BT| | 71
SP8990| | 73
SP8550DTV| | 65
SP3110| | 40
SP4120AV| | 37
ROADSTAR| | 58
RS-3130UDV
RS-7790DMTS| | 66
RS-4136| | 24
SKY| | 76
SKY-01
SKY-02| | 77
SKY-03| | 79
SKY-HDTV| | 80
SONY| | 14
CDX-GI217X CDX-GI40UX CDX-GT61/UX
CDX-GI227X CDX-GI41/UX CDX-GT627UX
CDX-GI26/X CDX-GI427UX MEX-1GPX
CDX-GI317X CDX-GI437UX
SONY +| | 15
WEBBOX| | 45
1300 – MODE UP
RECOMMENDED INSTALLATION FOR RECEIVER
RECOMMENDATIONS AND OBSERVATIONS
- To avoid interference, install the receiver in a location where the antenna Is close to the panel and at least 50 cm away from the car alarm receiver.
- For greater reach, the antenna must be kept taut and in a location that is visual and away from the car body.
- Supply the receiving unit with 12V.
TECHNICAL CHARACTERISTICS
| Product’s name | K600 |
|---|---|
| Transmitter power | 12V – Battery A23 |
| Receiver power | 9 to 16Vdc |
| Operating frequency | 433,92 MHz |
| Modulation | ASK |
See all products of the automotive line on our website. www.jfaeletronicos.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>