ADJ 520-00022 Lexis Kit Wireless User Manual

ADJ 520-00022 Lexis Kit Wireless

Operating environment

In order to get the full entertainment for using this new advanced product, please follow the below tips:

• The receiver should be far away from the Monitor, disc driver or other electronic products, in order to prevent radio disturbance, the suggested distance is above 20 centimeters.
• The radio signal can penetrate non-metallic objects to achieve 360-degree transmission, but it can not penetrate metal materials, so please do not put the mouse and the receiver onto the metallic tabletop.
• Please be sure there is no big size metal between the mouse and receiver to avoid disturbance.
• Wireless mice can be used on the surface with various colors and materials such as wood, paper, clothing, etc. But for glass and plastic surfaces, it is better to use the mouse pad.
• The actual receiving distance should be better than the standard, but if the mix machine, motor, electric drill and other strong electronic equipment operate nearby, may lead to slow receiving or other abnormalities.

Tips

• Check the receiver, be sure it is connected to the USB port
• Be sure that setting the battery is right
• Check the reminder light is shinning or not
• Reduce the distance of the receiver and keyboard and mouse
• Please use the product only for the purpose for which it was designed. It is forbidden any other use or modification.

Additional compliance information

• To obtain additional information about compliance, go to ADJ website: www.adj.it/certlflcation or contact ADJ Customer Support to the following e-mail address: supporto@adj.it
• Made in China – Imported and distributed by lo T Tecnologie s.r.l. Via de/lo Foeto, 1- 00030 San Cesoreo (ROMA) – Italy
• Congratulations for your choice of this 2.4Ghz wireless (Keyboard and Mouse). Please read the manual before using.

Features

• 2.4Ghz wireless keyboard + mouse, 10M effective distance
• Optical engine, accurate positioning
• Nano receiver, plug and play
• Low current consumption
• Compatible with Windows/ Mac

Tips

• Please take out the battery if you do not use your wireless kit for long time, laying aside cool and dry place preservation;
• Please do not use the battery if happens leaking, discoloration, distortion or another abnormity.

Battery installation Into keyboard and mouse

1. Open the battery cover
2. Put the battery in the correct direction
3. Cover the battery cover

In order to achieve the best economical effect. the intelligent power-saving technology is adopted. When your mouse stops moving, it will switch to the power-saving mode automatically. If your mouse stops working for about 5 minutes, it’ll enter the deep power-saving mode, which costs little battery. Click the buttons to wake up.

Connection of the receiver
Connection the receiver to the PC by the USB port, for a desktop, USB extending port or front set USB port is better. When the receiver plugs into USB port, the computer would detect the device automatically. The keyboard and mouse could work normally. If the keyboard and mouse couldn’t work normally, should build up connections between the keyboard and mouse and receiver.

Build up the connection between the keyboard and the receiver
Pull out the Nano receiver, and press the ESC and+/= keys at the same time for about 5-6 seconds. The indicator light is on. Insert the Nano receiver to the computer USB port. The indicator light is off. Now the keyboard can work. If not, please repeat the above steps.

Build up the connection between the mouse and receiver
Pull out the Nano receiver, turn on the ON/OFF button at the Bottom of the mouse. Insert the Nano receiver to the computer USB port. Now the mouse can work. If not. please repeat the above steps.

Warranty

This product is guaranteed against any manufacturing defect, based on the D.Lgs. February 2, 2002, No 24. In case of failure, please contact the retailer where you purchased it. You can be found at www.adj.it for the guarantee of a standard.

• This product complies with the following directives:
• DIRECTIVE 2014/53/EU on the harmonization of the laws of the Member States relating to the making available on the market to fraud equipment;
• DIRECTIVE 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
• The declaration of conformity for this product is visible on  www.adJ.it site, on the product page.

The symbol of the crossed-out trash indicates that the product, at the end of its useful life, must be treated separately from domestic waste and must be taken to a recycling center for electrical and electronic equipment or delivered to the seller when buying a replacement. The separate waste collection contributes in preventing possible adverse eftects on the environment and health and promotes the recovery of materials it is made. You are responsible for assigning the equipment in question at the appropriate waste disposal center. For more detailed information contact your local waste disposal service or the shop where it was purchased. Anyone who does not carry the product in a recycling center for electrical and electronic waste shall be punished with an administrative penalty provided by law on the illegal disposal of waste.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>