JFA Eletronicos VS5HI Voltmeter Sequencer User Manual
- October 30, 2023
- JFA ELETRONICOS
Table of Contents
VS5HI Voltmeter Sequencer
CONGRATULATIONS!
You have just purchased a product with the quality JFA Electronics, which was
developed with technology advanced and unique design. Please read the
operating instructions and installation in this guide ..
PRESENTATION
The voltmeter and sequencer VS5HI JFA was developed to perform three functions in the same equipment they are:
- Low voltage voltmeter to 17V;
- High-voltage voltmeter up to 500V;
- Remote command sequencer.
DESCRIPTION
- Selector functions: HOL (Hold) – LIG (ON) – OFF
- Voltmeter selector: LOW – HIGH;
- Five remote control outputs;
- High input voltage (battery bank);
- GND;
- Remote control input;
- Low input voltage ( + 12V).
INSTALLATION EXAMPLE
Recommendations
- Due to the risk of shock high voltage, look for a specialized service to perform the installation of this equipment.
- Do not use cables with damaged insulation cover for this installation. Make sure the cables are not being pressed at any point of the installation.
TECHNICAL FEATURES
VOLTMETER
Low Voltage Measurement| Maximum 17V
High voltage measuring| Maximum 500V
SEQUENCER REMOTE CONTROL
Current at output| 150 mA
Low voltage protection| <9,SV
against high voltage protection| > 17,0V
DIMENSIONS IN MM| 1Ox57x17 (WxHxD)
See all products of the automotive line on our website.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>