Great Little L5116 Under Bed Storage Drawer Instruction Manual
- October 30, 2023
- Great Little
Table of Contents
gltc.co.uk
Under-Bed Storage Drawer
L5116
Instruction Manual
Little L5116 Under Bed Storage Drawer
Thank you for shopping with GLTC, we hope you enjoy having this product in
your home.
We know assembling furniture, toys or accessories is not everyone’s favourite
way to spend their time, so we’ve tried to make assembling this item as quick
and painless as possible.
A few important pointers before you start:
- Please read the instructions right through before you start, and check that all the components have been included in the pack; we find separating all the hardware into piles makes it easier to be sure that everything is present and correct.
- Make sure you have the right tools. Allen keys are provided if required, but screw drivers and other tools are not. You’ll find details of the tools you need at the beginning of the instructions.
- It’s a good idea to build the unit in the room where you are going to be using it, to avoid the need to move it after it’s been assembled.
- Do not throw away any packing materials until assembly is complete, just in case you accidentally discard smaller parts or hardware.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at
instructions@gltc.co.uk
Thank you
Component Check List
STEP 1:
Insert the cam dowels #1 into the front panel A and back panel A.
Hardware for Step 1:
8x #1 Cam Dowels
STEP 2:
When the front panel and side panels are in place as shown, insert the cam
lock hardware (#2) into the holes in the side panels and turn clockwise to
lock and secure.
Hardware for Step 2:
4x #2 Cam Locks
STEP 3:
Slide the base panel C into the groove.
STEP 4:
When the back panel and side panels are in place as shown, insert the cam lock
hardware (#2) into the holes in the side panels and turn clockwise to lock and
secure.
Hardware for Step 4:
4x #2 Cam Locks
STEP 5:
Turn the drawer over and attach the wheels (#4) to the underside using 4x
screw (#3) per wheel.
Hardware for Step 5:
16x #3 12mmL Screws
Copyright© 2016 G.L.T.C. Ltd. All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C.
Limited.
Assembly Difficulty
easy – medium – hard
one-person job
V3
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>