Flash Furniture ZG-129-70-WAL-GG Nelson 70 Mid-Century Modern TV Stand

Product Information

• Product Name: TV Stand with Adjustable Shelves
• Model Numbers: ZG-129-70-WAL-GG / ZG-129-70-GY-GG
• Manufacturer: Ubique Group
• Customer Service Email: CustomerExperience@theubiquegroup.com
• Customer Service Phone: 866-552-2810

Product Usage Instructions

Read the manual:
Before using this product, read the provided manual carefully. Failure to follow the instructions and safety precautions in the manual can result in serious injury or death. Keep the manual in a safe location for future reference.

Assembly:
Follow the assembly instructions provided in the manual to set up the TV stand. Ensure that you have all the necessary components and tools listed in the manual.

Safety and Care Advice:
Follow the safety guidelines below to prevent accidents and ensure product durability:

• Do not put excessive weight on the product, as it may cause damage or topple over. Use the provided anti-tip strap or wall fixing method to secure the stand.
• Keep children from climbing or hanging on the furniture.
• Open only one drawer at a time.
• Avoid placing heavy items in the top drawers.
• If the furniture is not designed for it, do not place heavy items on top of it.

Note: Wall plugs and screws applicable to your wall type are not provided with the anti-tip strap. You will need to provide them separately.

Care and Maintenance:
To ensure the longevity of your TV stand, follow these care and maintenance tips:

• Avoid placing the stand in direct sunlight or near heat sources.
• Clean the surface with a soft, dry cloth or a mild detergent solution when necessary. Do not use abrasive cleaners.

Warranty Information:
For complete warranty information, visit https://www.theubiquegroup.com/warranty.

Customer Support:
If you have any questions, concerns, or need assistance, contact Ubique Group’s customer support team at 866-552-2810 or customerexperience@theubiquegroup.com. They are available to help you.

We hope you enjoy your new TV stand from Ubique Group! If you have any feedback, feel free to share it on social media using the hashtag

Spaces2Places. You can also write an online product review where you

purchased it.

Browse our branded collections at www.theubiquegroup.com/brands for more exciting products.

ASSEMBLY INSTRUCTIONS

Before You Begin:
Please identify all component parts and hardware pieces required before you begin. Carefully remove all of the components from the packaging and set aside for assembly. Assemble on a soft surface to prevent scratching during assembly.

Caution: Tighten all components securely before use. Failure to do so may result in personal injury. DO NOT use any sharp objects to open plastic- wrapped components as damage to product or components may result.

Warning: CHOKING HAZARD – Small Parts. Adult Assembly Required.

DO NOT ALLOW CHILDREN TO CLIMB ON FURNITURE
Serious or fatal injuries can occur from furniture tipping over. You must install Tipping Restraint Hardware (where included) to help prevent the unit from tipping and causing accidental injury, instability, death or damage. The tipping restraint is intended only as a safety measure, it is not a substitute for proper adult supervision.

To help prevent furniture from tipping over it must be permanently attached to the wall. Anti-Tip Safety Wall Straps suitable for the unit weight and wall materials (if not included) should be purchased and installed.

Congratulations!
You just purchased a piece of happiness. At Ubique Group, we believe you can transform your spaces into the most inspired places with furnishings that are the perfect combination of form, function and style. As original innovators of online furniture retail, we offer the best selection of popular, contemporary styles at cool, comfortable prices. And, with decades of proven shipping and packaging expertise, our Extended Quality Checklist ensures a rewarding, hassle-free experience time and time again. It’s just what you need to bring your vision to life

Thank you & Enjoy!! your friends at Ubique Group

Have a question, concern or simply need a hand? Your satisfaction is our top priority. Contact us at 866-552-2810 or customerexperience@theubiquegroup.com. We’re here to HELP

Browse Our Branded Collections
There’s something for everyone inside our family of brands.

Visit www.theubiquegroup.com/brands or scan this code

We pride ourselves on providing an excellent customer experience starting right here with your package and instructions. Everything you need should be right where you need it, so you can get to enjoying your new item ASAP. But despite our best efforts, sometimes “slips happen.” If you need any support, from replacement parts to recommendations, please reach out to our wonderful customer support team at 866-552- 2810 or customerexperience@theubiquegroup.com. We’re here to help!

EVERY UNIQUE GROUP PRODUCT

Please visit https://www.theubiquegroup.com/warranty for complete warranty information.

EVERY UBIQUE GROUP PRODUCT We pride ourselves on providing an excellent customer experience starting right here with your package and instructions. Everything you need should be right where you need it, so you can get to enjoying yournew item ASAP. But despite our best efforts, sometimes “slips happen.” If you need any support, from replacement parts to recommendations, please reach out to our wonderful customer support team at 866-552- 2810 or customerexperience@theubiquegroup.com. We’re here to help! Read this manual before using this product. Failure to follow the instructions and safety precautions in this manual can result in serious injury or death. Keep this manual in a safe location for future reference.

Safety and Care Advice

Important : Please read these instructions fully before starting assembly

• Check you have all the components and tools listed on the following pages.
• Remove all fittings from the plastic bags and separate them into their groups.
• Keep children and animals away from the work area, small parts could choke if
• Make sure you have enough space to layout the parts before starting
• During assembly do not stand or put weight on the product, this could cause damage.
• Assemble the item as close to its final position (in the same room) as possible.
• Assemble on a soft level surface to avoid damaging the unit or your floor.
• Parts of the assembly will be easier with 2 people.
• To reduce the likelihood of damaging your product please ensure that your power drill is set on a low torque setting.

Care and maintenance

• Only clean using a damp cloth and mild detergent, do no use bleach or abrasive cleaners.
• From time to time check that there are no loose screws on this unit.
• This product should not be discarded with household waste. Take to your local authority waste disposal centre.

Handy Hints

• Assemble all parts and bolts loosely during assembly, only once the product is complete should you fully tighten the bolts
• Regularly check and ensure That all bolts and fittings are tightend properly.

WARNING: In order to help prevent overturning  please follow these instructions

To help prevent product toppling over please follow the below steps:­

• Use the anti tip stap or wall fixing method provided (if applicable)
• Do not allow children to climb or hang on the furniture
• Do not open more than one drawer at a time
• Do not place heavy items in the top drawers
• Do not place heavy items on top of the furniture, unless the furniture has been designed for this purpose
• Please note that only the anti tip strap is provided.
• You will need to provide wall plugs and screws applicable for your wall type

Components  Fittings

Please check you have all the panels listed below
Note : The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.

Tools required

• Phillips screwdriver
• (medium & large)

Using Camlocks

• Step 1
  Connect the male camlock as diected in the assembly instructions using a scewdriver.

• Step 2
  Push the male camlock into the entry hole.

• Step 3
  Insert the female camlock as shown in the instruction.
  Note , ensure that the arrow on the top of the camlock points towards the entry hole for the male camlock.

• Step 4
  Turn the female camlock clockwise with a screwdriver. You should feel a click when the camlock is locked in place. The joint is now secure.

Adjusting Hinges

Hinge adjustment:

• To move the top panel up or down, loosen screws shown and move top panel to suit

• To move the top panel in or out, loosen screws shown and move top panel to suit.
  Retighten screws

• To move the top panel left or right, adjust screws shown.

Assembly Instructions

• Step 1
  Insert Male Camlocks (Part A) into Top Panel (Part 1)

• Step 2
  Insert (16) Dowel Rods (Part C) into the inside holes on End Panels (Part 3) & (Part 6) and Inner Panels (Part 4 & Part 5).

• Step 3
  Insert (8) Female Camlocks (Part B) into Panels 3,4,5, &6 ensuring the arrows are pointing toward the insertion hole.Place Top Panel (Part 1) onto the assembled frame and insert Male Camlocks into the Female Camlocks. Tighten using a PhillipsScrewdriver.

• Step 4
  Insert Left and Right Back Panels (Part 7) and Middle Panel (Part 8) into the rear slots of panels 3, 4, 5, & 6.

• Step 5
  Insert panels 3, 4, 5, & 6 into the bottom Panel (Part 2) ensuring the slots are aligned with the bottom panel slot. Attach panels using (8) 6*50mm Screws (Part E). Tighten with Allen Wrench (Part F). NOTE: Ensure Dowel Rods are fully seated before panels are permanently attached.

• Step 6
  Attach Side Legs (Part 11) and Middle Legs (Part 12) to Bottom Panel (Part 2) using (24) 4*14mm Screws (Part I). Tighten using a Phillips Screwdriver (not included)

• Step 7
  Insert (12) Plastic Wedges (Part J) into the upper, lower, and side slots between the back panel and frame. Attach wedges using the included screws .

• Step 8
  Insert (12) Shelf Support Pins (Part D) into the holes on the inside of the cabinets.

• Step 9
  Place (2) Side Shelves (Part 9) and the Middle Shelf (Part 10) onto the Shelf Support Pins.

• Step 10
  Attach (4) Hinges (Part K) using (8) 3.514mm Screws (Part H).
  Attach (2) Handles (Part G) using (4) 3.514mm Screws (Part H).

• Step 11
  Attach left door hinge to the cabinet using (8) 3.5*14mm Screws (Part H ).

• Step 12
  Attach left door hinge to the cabinet using (8) 3.5*14mm Screws (Part H ).

• Step 13
  Insert (2) Wood Dowels (Part C) into the Top Fascia (Part 15).

• Step 14
  Attach sides of Top Fascia using (2) 4*45mm Screws (Part M). Tighten using a Phillips Screwdriver (Not Included).

• Step 15
  Attach bottom of Top Fascia using (3) 4*45mm Screws (Part M). Tighten using a Phillips Screwdriver (Not Included).

• Step 16
  The unit is floor standing, but it is recommended that the unit is secured to the wall.

1. Move the unit into desired position.
2. Mark the wall with a suitable scribe the position of the fixing holes.  

Warning : Before driling,check wall for hidden pipes and cables.

3. Drill holes and insert 2 x wall plug
4. Attach 2 x Wall Straps to to the top of the unit using 2 x Washers and 2 x Screws
5. Secure the straps to the wall using 2 x Washers and 2 x Screws  

Note : To hide the straps behind the unit, drill the holes lower than the top of the unit

• Step 17

A Guide to Wall Mounting & Fixings 

Important note: If plastic wall plugs (rawl plugs) are supplied with your product, e.g.: – these are only suitable for use in masonry walls. If you are in any doubt about the correct wall plugs for your wall, seek professional advice. Failure of the product due to using the incorrect fixings is the responsibility of the installer.

Make sure that the screws and wall plugs being used are suitable for supporting your unit. Consult a qualified tradesperson if you are unsure.

Hints:

1. General rule: (D always use a larger screw and wall plug if you are not sure.
2. Ensure you use the recommended drill bit to match the wall plug and hole size.
3. Ensure you drill the hole horizontally; do not force the drill or enlarge the hole.
4. Take extra care when drilling high walls, ceilings and ceramic tiles. Ensure wall plugs are inserted beyond the thickness of the ceramic tiles to avoid the tiles splitting or cracking.
5. Ensure wall plugs are well fitted and are a tight fit in the drilled hole.

Types of walls

You can use one of the following types of wall plug if your walls are made of brick, breeze block, concrete, stone or wood.

Care & Maintenance

• Safety: Always check the fitting and location to ensure your safety in and around the home.
• Fitting: from time to time check the fitting to ensure the wall plugs or screws do not become loose.

References

• Ubique | Warranty

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>