Qualler BEW285536B Ahmad Full Over Full Low Bunk Bed Instruction Manual

Qualler BEW285536B Ahmad Full Over Full Low Bunk Bed

Product Information

The bunk bed comes with SKU: MF285536AAB, AAK, AAN. It has a weight limit of 250 lbs for the top bunk and 350 lbs for the bottom bunk. Replacement parts, including additional guardrails, can be obtained from any of the dealers of COMPTREE INC.

Product Usage Instructions

1. Read the safety warnings and general notes provided on the bunk bed end structure and on the carton. Do not remove the warning label from the bed.
2. Use the part list provided on Page 2 of 7 to identify the parts required for assembly.
3. Follow the assembly instructions provided on Pages 4-7 of 7 in order to assemble the bunk bed.
4. Use the recommended replacement parts, including additional guardrails, as required.
5. If you have any questions, contact [email protected] for assistance.

SAFETY WARNINGS AND GENERAL NOTES

• Follow the information on the warnings on the bunk bed end structure and on the carton.
• Do not remove the warning label from the bed. Always use the recommended size mattress on mattress support, or both, to help prevent the likelihood of entrapment or falls.
• The top surface of the mattress must be at least 5*inch (127mm) below the upper edge of the guardrail.
• Do not allow children under 6 years of age to use the upper bunk.
• Periodically check and ensure the guardrail, ladder, and other components are in their proper position, free from damage, and all connectors are tight.
• Do not allow horseplay on or under beds.
• Always prohibit jumping on the bed.
• Prohibit more than one person on the upper bunk.
• Always use the ladder for entering and leaving the upper bunk.
• Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
• The use of a night-tight may provide added safety precautions for a child using the upper bunk.
• Always use guardrails on both long sides of the upper bunk.
• If the bunk bed will be placed next to a wall, the guardrail that runs the full length of the bed should be placed against the wall to prevent entrapment between the bed and the wall.
• The use of water or sleep flotation mattresses is prohibited.
• STRANGULATION HAZARD-Never attaches or hang items to any part of the bunk bed that is not designed for use with the bed.
• Keep these instructions for future reference.
• We recommend assembling your bunk bed on the shipping carton to protect your floor or carpet.
• Be certain all staples are out of the box before beginning assembly on the shipping carton.
• USE ONLY MATTRESSES WHICH ARE AS THE TABLE BELOW ON THE UPPER AND ON LOWER
• BUNKS. ENSURE THICKNESS OF MATTRESS DOES NOT EXCEED 6″. Bed Type Length Width Thickness Full Standard 74” – 75” 53 ½” 6” max
• THE SURFACE OF THE MATTRESS MUST BE AT LEAST 5″ (127 MM) BELOW THE UPPER EDGE OFGUARDRAILS.
• Replacement Parts:
• Replacement Parts, including additional guardrails, may be obtained from any of our (COMPTREE INC.) dealers

ASSEMBLY INSTRUCTIONS

SKU: MF285536AAB,AAK,AAN

PART LIST

HARDWARE LIST

INSTALLATION INSTRUCTIONS

STEP 1

STEP 2

STEP 3

STEP 4

STEP 5

If you have any questions, please contact us! Our E-MAIL: [email protected].

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>