Wera 8009 Zyklop Pocket Set 2 Instructions
- June 9, 2024
- Wera
Table of Contents
8009 Zyklop Pocket Set 2, 18 pieces
Zyklop Pocket
https://www-de.wera.de/ar/3jk5jhbngnbxgkzla3gs8wcrz048htlm
8009 Zyklop Pocket Set 2
|
---|---
EAN:| 4.01329E+12
---|---
Part number:| 5004281001
Article number:| 8009 Zyklop Pocket Set 2
Size:| 140x110x55 mm
Weight:| 445 g
Country of origin:| CZ
Customs tariff number:| 82079030
- Compact Zyklop ratchet with integrated bit magazine
- Thanks to it’s clever design the ratchet head doubles up as both a 3/8″ square drive ratchet for sockets, and integral 1/4″ hexagon drive for screwdriver bits
- Freely pivoting ratchet head with 5 predefined locking positions
- Fine tooth reversible ratchet (72 teeth) for a low return angle of only 5°
- Captive and freely swivelling bit magazine for easy removal and secure storage of the bits
- Universal holder with stainless steel sleeve and strong permanent magnet, can be used as extension
- Robust textile holster to be attached to the belt and docked onto the Wera 2go system
Compact Zyklop ratchet with bit magazine for the pocket. Magnetic direct mounting for ¼” bits and 3/8″ sockets. Rapid tool change thanks to the non- locking mounting. As the head is lockable at 0°, 15° and 90°, the tool can be used as a ratchet and as a ratchet screwdriver. The fine toothing with 72 teeth allows for a low return angle of 5°. Wide range of applications thanks to 12 bits integrated in the handle. The robust ratchet mechanism allows for ample torque. Perfect combination of a Zyklop ratchet with a 12-piece screwdriver set. The 75 mm long universal holder for 1/4″ bits can be used as an extension. Including sockets in the commonest dimensions. One robust textile holster 9468 to be attached to the belt and docked onto the Wera 2go system.
Zyklop Pocket
Zyklop Pocket
Combination tool mounting
The magnetic direct mounting is suitable for 3/8″ sockets as well as ¼” bits.
With integrated bit magazine
A captive, freely swivelling bit magazine for 12 bits (1/4″, 25 mm length) is integrated in the handle of the compact ratchet.
Swiveling bit magazine
The swiveling bit magazine allows for the bits to be removed easily in almost any situation and cannot be lost. The bits are safely stored.
Freely pivoting ratchet head
The ratchet head pivots freely and can be locked into any defined position by using the slide switch that is positioned on either side. Itis even possible to work in very confined and difficult-to-access areas with enhanced hand clearance. The predefined locking at 0°, 15° and 90°, both to the right and left, ensure safe working without any slipping of the ratchet head.
Locking the ratchet head
Thanks to the sliding switch on both sides, the ratchet head can be locked at the pre-defined positions 0° as well as 15° and 90° to the right and left.
Small return angle
The fine toothing with 72 teeth allows for a low return angle of only 5° for working in constricted screwdriving situations.
Simple direction change
The Zyklop Pocket ratchet can be quickly and easily reversed for clockwise/counterclockwise rotation in any position using the knurl.
8009 Zyklop Pocket Set 2, 18 pieces
Set contents:
| Hook and Loop Fastener Strip 70, 50 x 70 mm | 1x 50 x 70 mm |
|---|
Wera – 8009 Zyklop Pocket Set 2
05004281001 – 4013288223050
Wera Werkzeuge GmbH
Korzerter Straße 21-25
D-42349 Wuppertal
Tel: +49 (0)2 02 / 40 45-0
E-Mail: info@wera.de
24.12.2022
References
- TCPDF
- 8009 Zyklop Pocket Set 2, 18 pieces - Wera Product finder
- www-de.wera.de/ar/3jk5jhbngnbxgkzla3gs8wcrz048htlm