Airtouch 2+ Smart Air Conditioning Thermostat User Manual
- October 30, 2023
- AIRTOUCH
Table of Contents
- Airtouch 2+ Smart Air Conditioning Thermostat
- Quick Start
- Mobile App
- Quick Menu & Controls
- Adjusting Airflow for a Zone
- Away Function
- Setting the AC Timer
- Advanced Unit Timer Functions
- Setting a Program
- Turbo Zone
- Setting up Favourites
- Sleep
- AirTouch 2+ App
- System Settings
- Screen Lock
- Owner’s Name
- Balance & Grouping Tables
- WiFi & Internet Setup
- Troubleshooting
- Specifications
- Liability and Disclaimer
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Airtouch 2+ Smart Air Conditioning Thermostat
View all AIRTOUCH thermostat manual
Quick Start
Console
Mobile App
Home Screen
- Some Settings & Zone names set up on the AirTouch Console will be replicated in the App.
Zones Screen
Quick Menu & Controls
You can access common AirTouch features using the Quick Menu.
- Access the Quick Menu by tapping on the menu icon in the top right.
Inside the Quick Menu
Turn On/Off AC
- To turn On or Off the AC tap the Power button
Adjusting Airflow for a Zone
Use the + and – buttons next to the zone names to increase or decrease the air flow in 5% increments
Your zone names are on the left of the home screen.
Away Function
Efficiently make sure home doesn’t get too warm or too cold while no one is home
- Press and hold the AC On/Off Button.
- Press Away. The Away icon will appar in the top status bar.
- To cancel Away Mode, press the Away button a second time, or adjust the Mode, Fan Speed or Temperature
NOTE:
Only available on COOL, HEAT, or DRY Mode. When activated, the system will
monitor the ambient temperature. When it approaches -1 of the upper limit
(Cool) or +1 of lower limit (Heat), the system will turn On the AC. If the
ambient temperature approaches -3 of the upper limit (Cool) or +3 of lower
limit (Heat), the system will turn off.
Setting the AC Timer
The AC Timer function is useful for automatically switching the AC on or off at a given time.
Quick Timer
Setting the Quick Timer from the Home screen to Turn ON or OFF the Air
Conditioning at a chosen time (up to 12 hours)
Turn ON Timer
To Set a Quick Timer to Turn On the Air Conditioning when the unit is
currently off, Tap and Hold the Power Button and scroll to select your desired
On Time. The On AC timer icon will appear below the power button.
Turn OFF Timer
To Set a Quick Timer to Turn Off the Air Conditioning when the unit is
currently on, Tap and Hold the Power Button and scroll to select your desired
Off Time. The Off AC timer icon will appear below the power button.
Remove Timer
Touch near the AC home to bring up Timer Setting dialogue. Choose the timer
to be removed and touch Confirm button to finish.
Advanced Unit Timer Functions
- Open the Quick Menu and select Programs
- Tap AC Timer to load the Time Wheel, and choose the time for each operation. When a Timer event is scheduled, a Timer Icon will display on the home screen next to your AC Unit’s name.
Setting a Program
A more advanced version of the Timer function is the Program function, letting you turn the AC ON or OFF and specify a Temperature for your entire house or airflow for individual zones for specific time and day ranges.
- Open the Quick Menu and select Programs
- Programs
Turbo Zone
For high volumes of conditioned air in a single zone.
AirTouch’s Turbo Zone feature can cool or warm a single zone quickly; or can
be useful when there is a lot of activity and you need more conditioned air
than normal
- Open the Quick Menu and select System Settings
- Tap on Turbo Group and a drop-down menu will appear. Select which room you want a larger volume of air
- To activate the Turbo function, tap on the button again
If there is more than one system, multiple Turbo groups can be set.
The Turbo function cannot be programmed.
It is activated manually from the console when needed
Setting up Favourites
AirTouch’s Favourites feature allows you to save your climate control scenarios.
- Open the Quick Menu and select Favourites.
- Create up to four Favourite presets. Select whether you want each zone ON or OFF.
- Give your Favourite(s) option a name and you’re good to go!
Sleep
Sleep comfortably while saving energy.
- Press and hold the AC On/Off Button.
- Press Sleep. The Sleep icon will appar in the top status bar
- To cancel Sleep Mode, press the Sleep button a second time, or adjust the Mode, Fan Speed or Temperature.
NOTE:
Only available on COOL, HEAT, or DRY Mode. When activated, the set point will
increase (Cool mode) or decrease (Heat mode) by 1 degree every hour for 3
hours. But the displayed AC set point will remain at your chosen temperature.
After three hours, the AC will remain at the decreased/increased set the point
utill Sleep Mode is cancelled.
AirTouch 2+ App
The AirTouch 2+ App can be downloaded free. After downloading the application, follow the prompts to link to your AirTouch console.
AirTouch 2+ is compatible with:
- iOS 8.0 and above
- Android 4.4 and above
NOTE:
If a mobile device is connected to the same WiFi network as your AirTouch 2+ ,
the app will automatically direct you to the control interface. Alternatively,
if you are unable to access the control interface, you will be prompted for
the AirTouch ID and password to continue. The AirTouch ID can be found in the
Preferences section on the console.
When away from home the app will connect to AirTouch using your phones’ 3G or
4G connection.
System Settings
Naming your Zones
- Zones are referred to as Groups in System Settings.
- Customise AirTouch’s Zone Names to suit your home
- Open the Quick Menu and select System Settings.
- Select Group Names and edit individual Groups/Zones by tapping on the space provided to enter information
To make it easy a preset name can be selected by selecting Name List.
Screen Lock
The Screen Lock Protects your Air Conditioning and AirTouch from potential damage caused by children playing with the console
- Select Screen Lock and choose a four-digit password. Now, when the console goes to sleep and turns blank, you can unlock it using the password
- Untick Screen Lock on the Preferences page to remove it.
Owner’s Name
The owner’s Name is used by the mobile app to distinguish between AirTouch 2+
systems.
The maximum length for a name is 16 letters.
- Open the Quick Menu and select System settings
- Select Preferences and edit Owner’s Name by tapping on the space provided to enter your details.
Balance & Grouping Tables
(Filled in by your installer)
Group| Group Name| Zones Included| Sensors| Turbo
Function| Balance
---|---|---|---|---|---
1| | | | |
2| | | | |
3| | | | |
4| | | | |
5| | | | |
6| | | | |
7| | | | |
8| | | | |
9| | | | |
A| | | | |
B| | | | |
C| | | | |
D| | | | |
E| | | | |
F| | | | |
G| | | | |
WiFi & Internet Setup
Connect AirTouch 2+ to a home WiFi network to enable the control/operation of the AC unit and zoning via local WiFi and internet.
- Open the Quick Menu and select WiFi Settings.
- Select your WiFi network, and enter in the password when prompted.
When your are connected successfully, the WiFi icon will appear in the status bar.
Software Updates
Please make sure AirTouch 2+ is connected to the home WiFi network with
internet access. If there is a red dot on the top right corner of the Quick
Menu, a new software version is available for update. Follow the red dot and
prompts to update the system.
Remote Internet Control
For remote AC control over the internet, ensure Internet Access is ticked
under System Settings > Preferences.
Local Access Password Protection
When enabled, mobile devices connected to the same WiFi Network as AirTouch
will need to use the set password to use the App.
Hotspot
If AirTouch doesn’t have access to the internet, you can still control it
locally over WiFi with the AirTouch App by using the console as a WiFi
Hotspot.
To setup AirTouch as a Hotspot, go to WiFi Settings, tick Enable Hotspot to
turn it on and set a password which will also be used as the Local Access
Password Protection password.
You can then connect your smart devices to this WiFi Hotspot to control
AirTouch using the App.
Troubleshooting
Problem meets solution
Problem | Suggested Action |
---|---|
LED in the lower right corner flashes quickly | No communication between the |
console and main module. Check if the AirTouch 2+ App is running and the
wiring.Disconnect the cable to the touchscreen and connect it back. Or power
off the main module of the AirTouch 2+ and power it back on in a minute.
LED flashes slowly (Every one second)| AC has an error. Either AC is faulty or
the communications between AC and AirTouch 2+ is lost. Call technician to
further investigate.
No LED light| No power to the console.
Dampers have no response when turned on or off| Check if LEDs on the main
module light up for relevant zones when the zone dampers are being turned
On/Off. If Green/Red LEDs are not activated for the respective zone, the main
module may be faulty, replace it.If there is response, there might be a faulty
cable and the cable would have to be replaced. If the zone is still non-
functional then there might be a faulty damper motor.
Check if the cable from touch-pad to the main control module is faulty. If it is a faulty cable, then replace the cable.
Check Grouping and find out if the right zones have been assigned to the right groups and have been turned ON/OFF in Zoning section.
Specifications
Electrical Requirements
- Power supply: 24V AC ±10%
- Line frequency: 50 Hz
Environmental Requirements
- Operating Temperature: 0°C to 60°C
- Altitude: 0 to 2000 meters
- Operating relative humidity: 10% to 80%
WARNIN G
- Avoid static electricity hazards
- Avoid electromagnetic radiation sources
- Avoid dust contamination
- Avoid highly corrosive environments
Zone Output
- Output voltage: 24VAC, 50Hz
- Current: 200mA (1 damper motor)
Transformer
- Input Voltage: 240VAC, 50Hz
- Output Voltage: 24VAC, 50Hz
- Wattage: 40W
- Supply Air Sensor NTC type, 10 kΩ at 25°C
- Fuse Dimension 5×20 mm, Fast-Acting 2A, 250V
Liability and Disclaimer
All specifications and procedures are correct at time of publication but are subject to change without notice. Please read the instructions before installing this Zone Control System. Polyaire Pty Ltd does not accept any responsibility for loss or damage that may occur as a result of the incorrect installation or operation of this AirTouch Control System.
Polyaire Pty Ltd
- 11-13 White Road Gepps Cross South Australia, 5094
- Tel: (08) 8349 8466
- Fax: (08) 8349 8446
Polyaire Pty Ltd 2020 Like us on Facebook at ‘facebook.com/meetAirTouch
https://thermostat.guide/airtouch/airtouch-2-smart-air-conditioning- thermostat-user-manual/