NYQUIST NQ-SMS1810-SCG Speaker Instruction Manual
- October 30, 2023
- NYQUIST
Table of Contents
NQ-SMS1810-SCG Speaker
Installation Instructions
Installation
- Determine the speaker location.
- Place the speaker upward-facing on top of a 24”–wide ceiling tile on a conventional suspended ceiling grid.
- If required by AHJ/local codes, use the seismic tie-offs provided to connect the unit to the ceiling structure.
Electrical connection
- Feed the supply cable through whip (if required) to connector.
- Select speaker leads for desired system type: 70V – Red, 25V – Yellow, and COM – Black for common. Interconnect the speakers in the system, making sure that all leads of the same color are connected. Avoid swapping colors.
- Cut bare wire tip off of unused speaker lead. Feed connection points through the clamp into the enclosure and tighten the clamp screws.
- Rotate the switch to the desired power setting.
Product has been tested to UL Standard 2043.
BOGEN®
Specifications are subject to change.
© Copyright 2023, Bogen Communications LLC
740-00193A 230424
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>