drybar Beach Bender Triple Barrel Waver Instruction Manual
- October 30, 2023
- drybar
Table of Contents
Beach Bender Triple Barrel Waver
Instruction Manual
the beach bender™ triple barrel waver
OPERATING INSTRUCTIONS & SAFETY GUIDE
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, especially when children are present, basic safety precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING. KEEP AWAY FROM WATER!
DANGER – As with most electrical appliances, electrical parts are
electrically live even when the switch is off. To reduce the risk of death by
electric shock:
- Always “unplug it” immediately after using.
- Do not use while bathing or in a shower.
- Do not place or store appliance where it can fall or be pulled into a tub or sink.
- Do not place in or drop into water or other liquid.
- If an appliance falls into water, “unplug it” immediately. Do not reach into the water.
- WARNING – To reduce the risk of burns, electrocution, fire, or injury to persons:
- An appliance should never be left unattended when plugged in.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
- Never operate this appliance if it has a damaged cord or plug, if it is not working properly, or if it has been dropped, damaged, or dropped into water. Return the appliance to a service center for examination and repair.
- Keep the cord away from heated surfaces. Do not wrap the cord around the appliance.
- Never use while sleeping.
- Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
- Do not use an extension cord with this appliance.
- Do not direct hot air toward eyes or other heat sensitive areas.
- Do not place appliance on any surface while it is operating.
- Do not operate with a voltage converter.
- Children should be supervised to ensure that they do not play with the appliance.
- Close supervision is necessary when this appliance is used by, on, or near children or individuals with certain disabilities.
- Never block the air openings of the appliance or place it on a soft surface such as a bed or couch, where the openings may be blocked. Keep the air openings free of lint, hair, and the like.
- Never drop or insert any object into any opening or hole in the appliance.
- Do not touch the posts that hold the iron. They are hot.
- This waver barrel and clip are hot when in use. Do not let eyes and bare skin touch heated surfaces.
- Do not place the heated curling iron directly on any surface while it is hot or plugged in. Use the stand provided (integrated stand of the handle).
- For Household use only.
- WARNING – Do not use this appliance near bathtubs, showers, basins or other vessels containing water.
- When the appliance is used in a bathroom, unplug it after use since the proximity of water presents a hazard even when the appliance is switched off.
- For additional protection, the installation of a residual current device (RCD) having a rated residual operating current not exceeding 30 mA is advisable in the electrical circuit supplying the bathroom. Ask your installer for advice.
- Burn hazard. Keep appliance out of reach from young children, particularly during use and cool down.
- When the appliance is connected to the power supply, never leave it unattended.
- Always place the appliance with the stand, if any, on a heat-resistant, stable flat surface.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Children shall not play with the appliance.
- Cleaning and user maintenance shall not be made by children without supervision.
- Burn hazard. Exchange attachment during cool down.
SAVE THESE INSTRUCTIONS
SERVICING OF DOUBLE-INSULATED APPLIANCES
- In a double-insulated appliance, two systems of insulation are provided instead of grounding.
- No grounding means is provided on a double insulated appliance, nor should a means for grounding be added to the appliance. Servicing a double-insulated appliance requires extreme care and knowledge of the system, and should be done only by qualified service personnel.
- Replacement parts for a double-insulated appliance must be identical to the parts they replace.
- A double-insulated appliance is marked with the words “DOUBLEINSULATION” or “DOUBLE INSU- LATED.” The symbol (square within a square) may also be marked on the appliance. ****
- This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
OPERATING INSTRUCTIONS
This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature
USAGE
- Turn on the waver by pressing the power button. The indicator light will illuminate.
- Press the + button to increase the temperature.
- Press the – button to decrease the temperature.
- Turn off the waver by pressing the power button. The indicator light will extinguish (it will shut off automatically after 60 minutes of use).
- Unplug at the end of use.
FEATURES & BENEFITS
Easy, Beachy Waves: Triple barrels create effortless, tousled waves with
volume.
Smoothest & Shines: Ionic Technology uses the power of negative ions to
reduce frizz for smoother, shinier tresses.
All Curves, No Creases: Custom curvature and tension of barrels help
avoid creases.
Adjustable Settings: Digital temperature control allows for custom
styling on all hair types (heats up to 450°F/230°C).
STYLING TIPS
- Section hair into clean, 3″ (7.5 cm) sections.
- Hold the tool horizontally, press to open the clamp and capture the top of the hair section between the barrels and clamp.
- Release clamp and hold in place for several seconds until desired definition is achieved.
- Open the clamp and move down the section. Repeat until the whole section is waved.
- For a deeper, more defined wave, keep the section clamped a few seconds longer.
Recommended Temperatures:
Fine/Damaged/Processed Hair: Up to 400°F (200°C)
Medium Hair: 410-420°F (210-220°C)
Thick/Coarse Hair: 430-450°F (220-230°C)
MAINTENANCE
This iron has no user-serviceable parts. Servicing should only be performed by an authorized service representative. While not in use, ensure the iron has completely cooled before being stored in a safe, dry location. For the safe usage of the iron, do the following every day:
- Check the cord and never use it if any parts are split, torn, or damaged.
- Check the plug and never use if it is cracked, split or damaged.
- Check the plug pins & never use if transformed or damaged.
- Check the control panel and do not use if cracked, split, broken or damaged.
- When not in use for long periods of time, clean and dry the entire iron using the steps listed below and store in a cool, dry place. When ready to use, follow the maintenance steps above, confirming each function of the iron.
DAILY CLEANING
- Disconnect the iron from the power source, wipe with a damp cloth and dry thoroughly.
- Warning: Do not wipe the iron with thinner, benzene, gasoline, lamp oil, or other solvents or chemicals, as that may cause accidents or malfunctions.
DEFECTS & MALFUNCTIONS
In case of defects or malfunctions, please consider the following points before contacting a repair service center:
- The warranty program covers defects in material and workmanship. Refer to the Warranty Card for details.
- Drybag Products LLC is not responsible for damage due to operator accidents, such as dropping the iron on the floor.
- In the event of malfunction, unplug the iron and follow the instructions on the Warranty Card.
TECHNICAL SPECS
North America
Model| The Beach Bender
Triple Barrel Waver 900-3335-4
---|---
Rated Voltage| 120 V~
Frequency (Hz)| 60 Hz
Rated Wattage| 105 W MAX
Length of AC Cord| 9 ft (2.74 m)
Weight| 17 oz (0.48 kg)
CHECK OUT OUR
HOW-TO VIDEOS
DRYBAR.COM/VIDEOS
©Dist. Drybag Products LLC · Irvine, CA 92618 USA · drybar.com · 700-3611-1
Made in China · Fabriquée aux Chine · Drybag®, The Beach Bender™ and Ionic
Technology®
are trademarks of Helen of Troy Limited · Drybag, The Beach Bender et Ionic
Technology sent
des marques deposes de Helen of Troy Limited.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>