ANKER 312 Charger 30W Instruction Manual

: June 14, 2024
: Anker

Table of Contents

ANKER 312 Charger 30W
Product Information
Product Usage Instructions
IC Statement
Specifications
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ANKER 312 Charger 30W

Product Information

Product Name: Anker 312 Charger
Product Number : A2640 51005003888 V01
Manufacturer: Anker Innovations Limited
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1 (800) 988 7973

Product Usage Instructions

Read all the instructions before using the product
Do not dispose of the product yourself in case of failure or component defect. Contact customer support or authorized personnel for assistance.
Connect the charger to an AC power source using the provided USB-C cable.
This charger complies with Part 15 of the FCC Rules, ensuring it does not cause harmful interference and accepts any interference received.
Make sure to use the charger in accordance with the Electrical Equipment (Safety) Regulations and Electromagnetic Compatibility Regulations.
If the charger causes undesired operation or interference, consult the dealer or an experienced radio/TV technician for help.
If you need further information, tutorials, manuals, or FAQs about the product, visit https://support.anker.com.

Attention

Read all the instructions before using the product.

The product is designed for use with IT equipment only.
Naked flame sources, such as candles, must not be placed on the product.
The disconnection from line voltage is made by AC plug.
In case of broken plugs, the product must be disposed of.
If you want to clean the product, only use a dry cloth or brush.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
The power supply is not intended to be repaired by service personnel in case of failure or component defect (the product can be disposed of).

FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

Warning : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio / TV technician for help.

The following importer is the responsible party (for FCC matters only).
Company Name : Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1 (800) 988 7973

IC Statement

This digital apparatus complies with CAN ICES-003(B)/NMB- 003(B).

Declaration of Conformity

Hereby, Anker Innovations Limited declares that this product is in compliance with Directive 2014/35/EU & 2014/30/EU & 2011/65/EU & 2009/125/EC & 2019/1782/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.anker.com.

GB Declaration of Conformity

Hereby, Anker Innovations Limited declares that this product is in compliance with Electrical Equipment (Safety) Regulations 2016 & Electromagnetic Compatibility Regulations 2016 & The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 & The Eco-design for Energy-Related Products Regulations 2010. The full text of the GB declaration of conformity is available at the following internet address https://www.anker.com.

For tutorial videos, FAQs, manuals, and more information, please visit :Or scan the QR code below

Indoor use only

This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
The following importer is the responsible party (contract for EU and UK matters)
Anker Innovations Deutschland GmbH | Georg-Much-Strasse 3, 80807 Munich, Germany
Anker Technology (UK) Limited | GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom

Specifications

Input
- 100-240V~0.9A, 50-60Hz
Output
- 5V 3A/9V 3A/12V 2.5A/
- 15V 2A/20V 1.5A (30.0W Max
Average Active Efficiency
- 83.24%
Efficiency at Low Load (10%)
- 74.03%
No-Load Power Consumption
- 0.02W
Recommended Operating Temperature
- 0-25℃/ 32-77℉

Note: To ensure electrical safety and product performance, the output power may fluctuate based on the Active Shield™ safety mechanism when the ambient temperature is between 26-35℃ (78.8-95℉) with a high output load.
Active Shield™ enhances protection by intelligently monitoring temperature and adjusting power output to safeguard your connected devices.

Customer Service

Service Client

18-month limited warranty

Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty

Lifetime technical support