Mark-II Aputure Spotlight Mount Set 26 Degree Lens User Manual

Mark-II Aputure Spotlight Mount Set 26 Degree Lens

Specifications:

• LED Power: 50W, 85W, 100W, 200W, 300W, 700W
• Total Load Max : 16A – 3.5KW
• LED Source: White, Tunable White, RGBW
• Type : Fresnel PC, Profile Downlight, Profile Fresnel, Cyclorama, Profile Followspot

Product Usage Instructions

Safety Instructions:

This manual contains all the safety information required for the appropriate use of the fixture. It shall be carefully read and stored for future reference.

Unpacking:

Remove the fixture from its package and ensure no damage occurs during transport. In case of damages, report it to the transport agent and seller for repair or replacement.

Installation:

Electrical wiring, plugging, and cabling should be done by professional technicians. Make sure to follow all procedures during installation.

Maintenance:

Do not open the fixture before disconnecting from the mains to avoid electrical shock. Inspect the parts annually for integrity and perform software upgrades. Repairs should be done by the manufacturer or authorized service center.

Compliance:

The product complies with European Directives.

FAQ

• Q: How do I dispose of the waste from the fixture?
  • A : Dispose of the waste according to proper waste-class regulation in compliance with 2012/19/EU guidelines.
• Q: Can I replace the lenses if they are scratched or ruined?
  • A: Yes, if the lenses are scratched or ruined, they should be replaced with original parts after cleaning.

Safety instructions

This manual contains all the safety information required for the appropriate use of the fixture. It shall be carefully read it and stored for future requirements.

Spotlight sc will not be responsible for any damage to the fixture itself, to other objects or people due to improper installation or use of the fixture either than hereinafter specified. Additionally, you are required to download the User Manual from www.spotlight.it for a comprehensive knowledge al each and all functions.

UNPACKING

Remove the fixture from its package and make sure no damage is incurred during transport. In the event of damages, a report or claim shall be issued to the transport agent and the seller to start the repair or replacement process.

PRINTED NOTES ON THE FIXTURES

A label of the fixture’s side displays the following information:

• Model part number
• Mains a.c.~ voltage (V)
• ower (W)
• Frequency (Hz)
• Protection rate (IP 20)
• ta max : maximum ambient temperature allowed (°C)
• t max : external surface temperature at thermal regime (°C)
• ……….X m minimum recommended distance between the fixture and the lighted object (m)

Risk Group 2, in compliance with EN62471. Do not face directly the light source as it might damage your eyesight.

Photo-Biological safety: do not stare at the light source while functioning

Dispose of waste : in compliance to 2012/19/EU, this fixture shall be disposed according to proper waste-class regulation

INSTALLATION

• This fixture is designed only for professional use, not for domestic use or handling
• This fixture can be either hung from top or fitted onto a tripod
• Make sure the hanging point is safe and stable. Additionally add a safety rope if required by local safety regulation
• Do not focus the light beam straight onto somebody’s eyes

ELECTRICAL CONNECTION

Electrical wiring, plugging and cabling shall be made by professional or qualified technicians. Before and during installation, attend to the following procedures:

• Check that main voltage and Frequency comply with what printed on the fisture’s label
• Always check the Mains line is properly grounded
• Check the working power of the fixture, as printed on its label, to prevent from line overload
• These fixtures is foreseen for indoor use: it shall be protected from rain and humidity if used under different conditions (IP 20)

MAINTENANCE

Do not open the fixture before disconnecting from the mains: an electrical shock might occur. A complete inspection shall be made once a year to check the electrical and mechanical parts’ integrity and the software upgrades. Repairs shall be made by the manufacturer only or its appointed after-sale service center. After cleaning, the lenses shall be re-assembled and, if scratched or ruined, they shall be replaced with original parts.

COMPLIANCE

This products complies with the European Directives:

• 2014/35/EU: Safety on Low Voltage Directive LVD
• 2014/30/EU: Electromagnetic Compatibility EMC
• 2011/65/EU : Restriction of Hazardous Substances Directive RoHS

General info

LED

Power

|

Powercon daisy chain

|

Cold start Inrush current

|

Type

| LED Source
---|---|---|---|---
White| Tunable White| RGBW| 6C| 8C

50W

|

Total load max

16A – 3,5KW

|

60A/230VAC

| Fresnel PC

Profile

|

1A

Mark-II Firmware 1.06 DMX chart 1 A

| | | |
85W| Downlight

100W

| Fresnel PC

Profile

| 2

Mark-II Firmware 1.03 DMX chart 2

|

3

Firmware 1.01 DMX chart 3

| 4

Mark-II Firmware 1.03 DMX chart 4

200W

| Fresnel PC

Profile

300W

|

80A/230VAC

| Cyclorama| | |
Fresnel PC

Profile Followspot

|

1B

Mark-II Firmware 1.05 DMX chart 1B

| |

700W

|

40A/230VAC

| Fresnel PC

Profile Followspot

| | | 5

Mark-II Firmware 1.07 DMX chart 5

All Spotlight lights, depending on the LED source installed and power, can be grouped into 6 groups (represented by 6 colours).

HARDWARE

Fresnel and PC:

1. Suspension yoke
2. Handle for tilt regulation
3. Accessory slot
4. Accessory locking and releasing guide
   • 7. Display and menu buttons
   • 8. DMX IN connector
   • 9. DMX THRU connector
   • 10. Fuse
   • 11. Power IN (Powercon connector)
   • 12. Power OUT (Powercon connector)
   • 13. Light intensity adjustment knob
   • 14. CCT / Colour wheel adjustment knob

Profile and Followspot have also:

• 5. Handles for lens adjustment (zoom and focus)
• 6. Levers for framing shutters adjustment
• 15. Screw for front housing removal
• 16. Front housing rotation stop knob
• 17. Front housing access door screw for lens cleaning
• 18. Gobo slot sliding cover

ELECTRICAL AND DMX CONNECTIONS

DISPLAY

| White| White| TW| RGBW| 6C| 8C
---|---|---|---|---|---|---

If the luminaire is DMX controlled, after 3 seconds the display will show the mode and DMX address.

Otherwise it will show the potentiometers status.

By pressing the ENTER (or SETUP) button you access the SETTINGS.

With the PREV and NEXT buttons you can scroll the items list which in case of value type entries will have the function of increasing (+) or decreasing (-) the values.

The ENTER button allows to access the submenu and change the values which can be confirmed by pressing ENTER or canceled with the BACK button, which can be used also to exit the submenu and go back to the main menu.

| |

Display Mark-II

Red band: the working list of PRESET. There are 3 lists:

o   MANUAL PRESET: CCT (9) + LEE FILTERS (66) + custom (10)

o   MANUAL COLOUR: LEE filters (66) + custom (19)

o   MANUAL CCT: CCT (36)

To move from one list of presets to another use the arrows

–       Filter name + filter code

–       CCT

–       Dimmer value 0 – 100%

–       Dimmer value 0 – 255

When switched on, the fixture recalls the last saved dimmer and preset value. How to save a preset :

1. select the desired dimmer and preset values

2. press and hold the red encoder (CCT/COLOUR WHEEL) for 3 seconds

3. saving will be confirmed by the red color of the text

Note:

– if you change the dimmer , the color goes from red to yellow (and when you go back to the saved value it goes back to red)

– if you change the prese t, the color goes from red to white

If the fixture is connected to a DMX console, the encoders are automatically disabled. If you need to activate the encoders without disconnecting the fixture from the console, press and hold the first button from the top for 2 seconds. To exit this mode, just hold down the same button for 2 seconds.

|

When switched on, the installed software version is displayed, followed by the display of the default settings, ie the currently set operating mode.

If the luminaire is DMX controlled, after 3 seconds the display will show the mode and DMX address.
Otherwise, it will show the potentiometer status.

By pressing the ENTER (or SETUP) button you access the SETTINGS.
With the PREV and NEXT buttons, you can scroll the items list which in case of value type entries will have the function of increasing (+) or decreasing (-) the values.

The ENTER button allows to access the submenu and change the values which can be confirmed by pressing ENTER or canceled with the BACK button, which can be used also to exit the submenu and go back to the main menu.

Display Mark-II
Red band: the working list of PRESET.

There are 3 lists:

• MANUAL PRESET : CCT (9) + LEE FILTERS (66) + custom (10)
• MANUAL COLOUR: LEE filters (66) + custom (19)
• MANUAL CCT : CCT (36)

To move from one list of presets to another use the arrows

• Filter name + filter code
• CCT
• Dimmer value 0 – 100%
• Dimmer value 0 – 255

When switched on, the fixture recalls the last saved dimmer and preset value.

How to save a preset:

1. select the desired dimmer and preset values
2. press and hold the red encoder (CCT/COLOUR WHEEL) for 3 seconds
3. saving will be confirmed by the red color of the text

Note:

• if you change the dimmer, the color goes from red to yellow (and when you go back to the saved value it goes back to red)
• if you change the preset, the color goes from red to white

If the fixture is connected to a DMX console, the encoders are automatically disabled. If you need to activate the encoders without disconnecting the fixture from the console, press and hold the first button from the top for 2 seconds. To exit this mode, just hold down the same button for 2 seconds.

All the luminaires are designed to be used in different operating modes:

• LOCAL ENCODER
• DMX
• RDM
• STAND ALONE (only for RGBW, 6C, 8C)

The fixture shall have the possibility to able and disable to potentiometers/encoders

If the potentiometers/encoders are active:

• a. in the absence of the DMX signal the fixture is controlled via potentiometer/encoders
• b. in the presence of the fixture receiving a relevant DMX signal, the potentiometer/recorders are ignored
• c. if the DMX input is removed or lost, the last DMX level is kept until you act on the potentiometer/recorders, which will set the new value

If the potentiometers/encoders are disabled the fixture can be controlled only via DMX (or MASTER-SLAVE function)

Some parameters can be modified directly into the fixture by using the SETTINGS menu or by using a console thanks to the DMX PERSONALITIES and related channels.

Settings

| Values| White 50- 200| White 300-700| TW| RGBW| 6C| 8C| How to…
---|---|---|---|---|---|---|---|---

DMX SETTINGS

| DMX ADDRESS| 1 (default) – … – xxx| YES| YES| YES| YES| YES| YES| How to set the DMX address and DMX personality
DMX PERSONALITY| See related table| DMX

chart 1A

| DMX chart 1B| DMX

chart 2

| DMX

chart 3

| DMX char t 4| DMX

chart 5

WIRELESS DMX

Mark- II

| ACTIVATION| ON

OFF (default)

| YES| YES| YES| –| YES| YES|
SHoW ID| 24100 – …- 24300 (default) – … –

24359

| YES| YES| YES| –| YES| YES
SHoW KEY| 000 (default) – … – 500| YES| YES| YES| –| YES| YES

STAND ALONE

| STANDALONE SET| DISABLED (default) STDALONE MANUAL STDALONE AUTO SCENE MASTER MANUAL MASTER AUTO SCENE

SLAVE

|

–

|

–

|

–

|

YES

|

YES

|

YES

| How to set the stand alone and master-slave functions
MANUAL MODE|
AUTO SCENE MODE|
CUSTOM PRESETS|

OPTIONS

| LED DELAY| OFF – 50 – … –

1000 (default) – … – 2000ms

| YES| YES| YES| YES| YES| YES| How to emulate the performance of halogen lamp
DIMMING CURVE| LINEAR (1)

HALO (2)

QUADRATIC (default) (3)

GAMMA 2.6 (4) Mark-II

GAMMA 2.8 (5) Mark-II

S (6) Mark-II

|

YES

|

YES

|

YES

|

YES 1-2-3

|

YES

|

YES

AMBER SHIFT| ON

OFF (default)

| –| –| –| –| YES| YES
OUTPUT FREQUENCY| 500 – 501 – … – 1200 (default) – …

– 20000 Hz

| YES| YES| YES| YES| YES| YES| How to remove flickering
LED BOOST| ON

OFF (default)

| YES| –| YES| YES| YES| YES| How to increase +20% light output
FAN MODE| AUTO (default) STANDARD SILENT

remote control over DMX

|

YES

|

YES

|

YES

|

YES

|

YES

|

YES

| How to set the silent mode
DISPLAY ROTATION| STANDARD (default) ROTATED| YES| YES| YES| YES| YES| YES| How to set the display
DISPLAY ON/OFF| ON (default) OFF| YES| YES| YES| YES| YES| YES
MANUAL CONTROL Mark-II| ON (default) OFF|

YES

|

YES

|

YES

|

–

|

YES

|

YES

| Abilita/disabilita il funzionamento degli

encoder

CURRENT MODULATION Mark-II| ON (default) OFF| YES| –| –| –| –| –|
LED CALIBRATION| RED| 0..255 (default)| –| –| –| YES| YES| YES| How to set LED calibration
GREEN| 0..255 (default)| –| –| –| YES| YES| YES
BLU| 0..255 (default)| –| –| –| YES| YES| YES
WHITE| 0..255 (default)| –| –| –| YES| –| –
AMBER| 0..255 (default)| –| –| –| –| YES| YES
CYAN| 0..255 (default)| –| –| –| –| YES| YES
LIME| 0..255 (default)| –| –| –| –| YES| YES
DEFAULT SET*| | YES| YES| YES| YES| YES| YES| How to back to the default settings
FACTORY SETTINGS| | YES| YES| YES| YES| YES| YES|
INFO| LED TEMPERATURE| °C| YES| YES| YES| YES| YES| YES|
BOARD TEMPERATURE Mark- II| | YES| YES| YES| –| YES| YES
MICRO-PROCESSOR TEMPEARURE Mark-II**| | –| YES| YES| –| YES| YES
LED TIME| | YES| YES| –| –| –| –
RED LED TIME| hr – min| –| –| –| YES| YES| YES
GREEN LED TIME| hr – min| –| –| –| YES| YES| YES
BLU LED TIME| hr – min| –| –| –| YES| YES| YES
WHITE LED TIME| hr – min| –| –| –| YES| –| –
AMBER LED TIME| hr – min| –| –| –| –| YES| YES
CYAN LED TIME| hr – min| –| –| –| –| YES| YES
LIME LED TIME| hr – min| –| –| –| –| YES| YES
WARM WHITE TIME| hr – min| –| –| YES| –| –| YES
COLD WHITE TIME| hr – min| –| –| YES| –| –| YES
UNIT TIME| hr – min| YES| YES| YES| YES| YES| YES
SOFTWARE VERSION| V….. Release date| YES| YES| YES| YES| YES| YES

This section lists all the menu functions, highlighting, for each of them, in which group they are present.

DEFAULT SET : It brings the parameters back to the “original built-in settings” (i.e. fan speed, dimming curve, delay…) as they came out from the factory
FACTORY SETTINGS: Password-protected menu, used by Spotlight Tech. Dept to apply special settings (limit the current, working hours reset, limit the power consumption, …). These parameters do NOT affect the “default settings” NOTE: Not for final users

DMX personalities

The following sections present the Personalities, also called DMX charts, available for each group to allow the lighting designer to choose which mode to operate the fixture based on the parameters he decides to control and the number of channels available on the console he is using.

WHITE 50-85-100-200W

WHITE 300-700W

CURRENT MODULATION Mark-II

This is an operating mode to eliminate flickering disturbances, caused by PWM driving of the LED, and acoustic disturbances, generated by electronic components.
This model is specifically indicated for applications in TV Studios or acoustic sheels where maximum silence of the devices and the absence of flicker are required.

TUNABLE WHITE

4 ch

|

WW +/-

correzione live del CCT STEP selezionato (= “zero point”)

| 0..5| OFF
6..111| from minimum to standard
112..144| CCT STEP
145..239| from standard to maximum
240..255| OFF

5 ch

|

CW +/-

correzione live del CCT STEP selezionato (= “zero point”)

| 0..5| OFF
6..111| from minimum to standard
112..144| CCT STEP
145..239| from standard to maximum
240..255| OFF
6 ch| DELAY| See related table
7 ch| FAN| 0..255| from minimum to maximum
8 ch| STROBO & STORE| See related table
9 ch| SERVICE| See related table
16 bit| SPLIT
---|---
Function| DMX value| Description
1 ch| DIMMER| 0..255| from OFF (0) to full (255)
2 ch| DIMMER FINE| 0..255| from OFF (0) to full (255)
3 ch| WARM WHITE| 0..255| from OFF (0) to full (255)
4 ch| WARM WHITE FINE| 0..255| from OFF (0) to full (255)
5 ch| COLD WHITE| 0..255| from OFF (0) to full (255)
6 ch| COLD WHITE FINE| 0..255| from OFF (0) to full (255)
7 ch| DELAY| See related table
8 ch| FAN| 0..255| from minimum to maximum
9 ch| STROBO & STORE| See related table
10 ch| SERVICE| See related table
16 bit| THEATRE FULL
---|---
Function| DMX value| Description
1 ch| DIMMER| 0..255| from OFF (0) to full (255)
2 ch| DIMMER FINE| 0..255| from OFF (0) to full (255)
3 ch| CCT LINEAR| See related table
4 ch| DELAY| See related table
5 ch| FAN| 0..255| from minimum to maximum
6 ch| STROBO & STORE| See related table
7 ch| SERVICE| See related table

RGBW

6 COLOURS

2 ch

|

HUE

|

0..255

| Sequence: R, R+L, R+G+L,

G+L, G, G+C, G+B+C, B+C, B, B+A, R+B+A, R+A, R

3 ch| HUE FINE| 0..255| Selection of the colour – fine
4 ch| SATURATION| 0..255| from OFF (0) to full (255)   to dim the channel of CCT LINEAR
5 ch| CCT LINEAR| See related table
6 ch| STROBO & STORE| See related table
7 ch| SERVICE| See related table
8 bit| RGBACL
---|---
Function| DMX value| Description
1 ch| DIMMER| 0..255| from OFF (0) to full (255)
2 ch| RED| 0..255| from OFF (0) to full (255)
3 ch| GREEN| 0..255| from OFF (0) to full (255)
4 ch| BLUE| 0..255| from OFF (0) to full (255)
5 ch| AMBER| 0..255| from OFF (0) to full (255)
6 ch| CYAN| 0..255| from OFF (0) to full (255)
7 ch| LIME| 0..255| from OFF (0) to full (255)
8 ch| STROBO & STORE| See related table
9 ch| SERVICE| See related table
16 bit| STUDIO
---|---
Function| DMX value| Description
1 ch| DIMMER| 0..255| from OFF (0) to full (255)
2 ch| DIMMER FINE| 0..255| from OFF (0) to full (255)
3 ch| RED| 0..255| from OFF (0) to full (255)
4 ch| RED FINE| 0..255| from OFF (0) to full (255)
5 ch| GREEN| 0..255| from OFF (0) to full (255)
6 ch| GREEN FINE| 0..255| from OFF (0) to full (255)
7 ch| BLUE| 0..255| from OFF (0) to full (255)
8 ch| BLUE FINE| 0..255| from OFF (0) to full (255)
9 ch| AMBER| 0..255| from OFF (0) to full (255)
10 ch| AMBER FINE| 0..255| from OFF (0) to full (255)
11 ch| CYAN| 0..255| from OFF (0) to full (255)
12 ch| CYAN FINE| 0..255| from OFF (0) to full (255)
13 ch| LIME| 0..255| from OFF (0) to full (255)
14 ch| LIME FINE| 0..255| from OFF (0) to full (255)
15 ch| ROSCO FILTERS Mark-II| See related table
16 ch| LEE FILTERS Mark-II| See related table
17 ch| CCT STEPS| See related table

18 ch

|

GREEN +/-

| 0..15| OFF
16..126| MINUS GREEN –
127..144| ZERO POINT-CENTER
145..255| PLUS GREEN +
19 ch| DELAY| See related table
20 ch| FAN| 0..255| from minimum to maximum
21 ch| STROBO & STORE| See related table
22 ch| SERVICE| See related table
23 ch| FREE 1 Mark-II| (for future use)
24ch| FREE 2 Mark-II| (for future use)
16 bit| THEATRE
---|---
Function| DMX value| Description
1 ch| DIMMER| 0..255| from OFF (0) to full (255)
2 ch| DIMMER FINE| 0..255| from OFF (0) to full (255)
3 ch| RED| 0..255| from OFF (0) to full (255)
4 ch| RED FINE| 0..255| from OFF (0) to full (255)
5 ch| GREEN| 0..255| from OFF (0) to full (255)
6 ch| GREEN FINE| 0..255| from OFF (0) to full (255)
7 ch| BLUE| 0..255| from OFF (0) to full (255)
8 ch| BLUE FINE| 0..255| from OFF (0) to full (255)
9 ch| AMBER| 0..255| from OFF (0) to full (255)
10 ch| AMBER FINE| 0..255| from OFF (0) to full (255)
11 ch| CYAN| 0..255| from OFF (0) to full (255)
12 ch| CYAN FINE| 0..255| from OFF (0) to full (255)
13 ch| LIME| 0..255| from OFF (0) to full (255)
14 ch| LIME FINE| 0..255| from OFF (0) to full (255)
15 ch| ROSCO FILTERS Mark-II| See related table
16 ch| LEE FILTERS Mark-II| See related table
17 ch| SATURATION| 0..255| from OFF (0) to full (255)   to dim the channel of CCT LINEAR
18 ch| CCT LINEAR| See related table

19 ch

|

GREEN +/-

| 0..15| OFF
16..126| MINUS GREEN –
127..144| ZERO POINT – CENTER
145..255| PLUS GREEN +
20 ch| DELAY| See related table
21 ch| FAN| 0..255| from minimum to maximum
22 ch| STROBO & STORE| See related table
23 ch| SERVICE| See related table
24 ch| FREE 1 Mark-II| (for future use)
25 ch| FREE 2 Mark-II| (for future use)
16 bit| RGBACL Mark-II
---|---
Function| DMX value| Description
1 ch| DIMMER| 0..255| from OFF (0) to full (255)
2 ch| DIMMER FINE| 0..255| from OFF (0) to full (255)
3 ch| RED| 0..255| from OFF (0) to full (255)
4 ch| RED FINE| 0..255| from OFF (0) to full (255)
5 ch| GREEN| 0..255| from OFF (0) to full (255)
6 ch| GREEN FINE| 0..255| from OFF (0) to full (255)
7 ch| BLUE| 0..255| from OFF (0) to full (255)
8 ch| BLUE FINE| 0..255| from OFF (0) to full (255)
9 ch| AMBER| 0..255| from OFF (0) to full (255)
10 ch| AMBER FINE| 0..255| from OFF (0) to full (255)
11 ch| CYAN| 0..255| from OFF (0) to full (255)
12 ch| CYAN FINE| 0..255| from OFF (0) to full (255)
13 ch| LIME| 0..255| from OFF (0) to full (255)
14 ch| LIME FINE| 0..255| from OFF (0) to full (255)

8 COLOURS

2 ch

|

HUE

|

0..255

| Sequence: R, R+L, R+G+L, G+L, G, G+C, G+B+C, B+C, B, B+A, R+B+A, R+A, R
3 ch| HUE FINE| 0..255| Selection of the colour – fine
4 ch| SATURATION| 0..255| from OFF (0) to full (255)   to dim the channel of CCT LINEAR
5 ch| CCT LINEAR| See related table
6 ch| STROBO & STORE| See related table
7 ch| SERVICE| See related table
8 bit| RGBACL+WW+CW
---|---
Function| DMX value| Description
1 ch| DIMMER| 0..255| from OFF (0) to full (255)
2 ch| RED| 0..255| from OFF (0) to full (255)
3 ch| GREEN| 0..255| from OFF (0) to full (255)
4 ch| BLUE| 0..255| from OFF (0) to full (255)
5 ch| AMBER| 0..255| from OFF (0) to full (255)
6 ch| CYAN| 0..255| from OFF (0) to full (255)
7 ch| LIME| 0..255| from OFF (0) to full (255)
8 ch| WARM WHITE| 0..255| from OFF (0) to full (255)
9 ch| COLD WHITE| 0..255| from OFF (0) to full (255)
10 ch| STROBO & STORE| See related table
11 ch| SERVICE| See related table
16 bit| RGBACL+WW+CW
---|---
Function| DMX value| Description
1 ch| DIMMER| 0..255| from OFF (0) to full (255)
2 ch| DIMMER FINE| 0..255| from OFF (0) to full (255)
3 ch| RED| 0..255| from OFF (0) to full (255)
4 ch| RED FINE| 0..255| from OFF (0) to full (255)
5 ch| GREEN| 0..255| from OFF (0) to full (255)
6 ch| GREEN FINE| 0..255| from OFF (0) to full (255)
7 ch| BLUE| 0..255| from OFF (0) to full (255)
8 ch| BLUE FINE| 0..255| from OFF (0) to full (255)
9 ch| AMBER| 0..255| from OFF (0) to full (255)
10 ch| AMBER FINE| 0..255| from OFF (0) to full (255)
11 ch| CYAN| 0..255| from OFF (0) to full (255)
12 ch| CYAN FINE| 0..255| from OFF (0) to full (255)
13 ch| LIME| 0..255| from OFF (0) to full (255)
14 ch| LIME FINE| 0..255| from OFF (0) to full (255)
15 ch| WARM WHITE| 0..255| from OFF (0) to full (255)
16 ch| WARM WHITE FINE| 0..255| from OFF (0) to full (255)
17 ch| COLD WHITE| 0..255| from OFF (0) to full (255)
18 ch| COLD WHITE FINE| 0..255| from OFF (0) to full (255)
16 bit| STUDIO
---|---
Function| DMX value| Description
1 ch| DIMMER| 0..255| from OFF (0) to full (255)
2 ch| DIMMER FINE| 0..255| from OFF (0) to full (255)
3 ch| RED| 0..255| from OFF (0) to full (255)
4 ch| RED FINE| 0..255| from OFF (0) to full (255)
5 ch| GREEN| 0..255| from OFF (0) to full (255)
6 ch| GREEN FINE| 0..255| from OFF (0) to full (255)
7 ch| BLUE| 0..255| from OFF (0) to full (255)
8 ch| BLUE FINE| 0..255| from OFF (0) to full (255)
9 ch| AMBER| 0..255| from OFF (0) to full (255)
10 ch| AMBER FINE| 0..255| from OFF (0) to full (255)
11 ch| CYAN| 0..255| from OFF (0) to full (255)
12 ch| CYAN FINE| 0..255| from OFF (0) to full (255)
13 ch| LIME| 0..255| from OFF (0) to full (255)
14 ch| LIME FINE| 0..255| from OFF (0) to full (255)
15 ch| WARM WHITE| 0..255| from OFF (0) to full (255)
16 ch| WARM WHITE FINE| 0..255| from OFF (0) to full (255)
17 ch| COLD WHITE| 0..255| from OFF (0) to full (255)
18 ch| COLD WHITE FINE| 0..255| from OFF (0) to full (255)
19 ch| ROSCO FILTERS Mark-II| See related table
20 ch| LEE FILTERS Mark-II| See related table
21 ch| CCT STEPS| See related table

22 ch

|

GREEN +/-

| 0..15| OFF
16..126| MINUS GREEN –
127..144| ZERO POINT – CENTER
145..255| PLUS GREEN +
23 ch| DELAY| See related table
24 ch| FAN| 0..255| from minimum to maximum
25 ch| STROBO & STORE| See related table
26 ch| SERVICE| See related table
27 ch| FREE 1 Mark-II| (for future use)
28 ch| FREE 2 Mark-II| (for future use)
16 bit| THEATRE
---|---
Function| DMX value| Description
1 ch| DIMMER| 0..255| from OFF (0) to full (255)
2 ch| DIMMER FINE| 0..255| from OFF (0) to full (255)
3 ch| RED| 0..255| from OFF (0) to full (255)
4 ch| RED FINE| 0..255| from OFF (0) to full (255)
5 ch| GREEN| 0..255| from OFF (0) to full (255)
6 ch| GREEN FINE| 0..255| from OFF (0) to full (255)
7 ch| BLUE| 0..255| from OFF (0) to full (255)
8 ch| BLUE FINE| 0..255| from OFF (0) to full (255)
9 ch| AMBER| 0..255| from OFF (0) to full (255)
10 ch| AMBER FINE| 0..255| from OFF (0) to full (255)
11 ch| CYAN| 0..255| from OFF (0) to full (255)
12 ch| CYAN FINE| 0..255| from OFF (0) to full (255)
13 ch| LIME| 0..255| from OFF (0) to full (255)
14 ch| LIME FINE| 0..255| from OFF (0) to full (255)
15 ch| WARM WHITE| 0..255| from OFF (0) to full (255)
16 ch| WARM WHITE FINE| 0..255| from OFF (0) to full (255)
17 ch| COLD WHITE| 0..255| from OFF (0) to full (255)
18 ch| COLD WHITE FINE| 0..255| from OFF (0) to full (255)
19 ch| ROSCO FILTERS Mark-II| See related table
20 ch| LEE FILTERS Mark-II| See related table
21 ch| SATURATION| 0..255| from OFF (0) to full (255)   to dim the channel of CCT LINEAR
22 ch| CCT LINEAR| See related table

23 ch

|

GREEN +/-

| 0..15| OFF
16..126| MINUS GREEN –
127..144| ZERO POINT – CENTER
145..255| PLUS GREEN +
24 ch| DELAY| See related table
25 ch| FAN| 0..255| from minimum to maximum
26 ch| STROBO & STORE| See related table
27 ch| SERVICE| See related table
28 ch| FREE 1 Mark-II| (for future use)
29 ch| FREE 2 Mark-II| (for future use)| 16 bit| THEATRE
---|---
Function| DMX value| Description
1 ch| DIMMER| 0..255| from OFF (0) to full (255)
2 ch| DIMMER FINE| 0..255| from OFF (0) to full (255)
3 ch| RED| 0..255| from OFF (0) to full (255)
4 ch| RED FINE| 0..255| from OFF (0) to full (255)
5 ch| GREEN| 0..255| from OFF (0) to full (255)
6 ch| GREEN FINE| 0..255| from OFF (0) to full (255)
7 ch| BLUE| 0..255| from OFF (0) to full (255)
8 ch| BLUE FINE| 0..255| from OFF (0) to full (255)
9 ch| AMBER| 0..255| from OFF (0) to full (255)
10 ch| AMBER FINE| 0..255| from OFF (0) to full (255)
11 ch| CYAN| 0..255| from OFF (0) to full (255)
12 ch| CYAN FINE| 0..255| from OFF (0) to full (255)
13 ch| LIME| 0..255| from OFF (0) to full (255)
14 ch| LIME FINE| 0..255| from OFF (0) to full (255)
15 ch| WARM WHITE| 0..255| from OFF (0) to full (255)
16 ch| WARM WHITE FINE| 0..255| from OFF (0) to full (255)
17 ch| COLD WHITE| 0..255| from OFF (0) to full (255)
18 ch| COLD WHITE FINE| 0..255| from OFF (0) to full (255)
19 ch| ROSCO FILTERS Mark-II| See related table
20 ch| LEE FILTERS Mark-II| See related table
21 ch| SATURATION| 0..255| from OFF (0) to full (255)   to dim the channel of CCT LINEAR
22 ch| CCT LINEAR| See related table

23 ch

|

GREEN +/-

| 0..15| OFF
16..126| MINUS GREEN –
127..144| ZERO POINT – CENTER
145..255| PLUS GREEN +
24 ch| DELAY| See related table
25 ch| FAN| 0..255| from minimum to maximum
26 ch| STROBO & STORE| See related table
27 ch| SERVICE| See related table
28 ch| FREE 1 Mark-II| (for future use)
29 ch| FREE 2 Mark-II| (for future use)

Note: CCT LINEAR has priority over COLOUR PRESET has priority over manual selected colours (from channel 3 to 14)

Related tables

SERVICE CHANNEL

| White| White| TW| RGBW| 6C| 8C
---|---|---|---|---|---|---

SERVICE 1 (RGBW, 6C, 8C)

|

STAND ALONE

(here you create)

|

CUSTOM PRESETS

| 0..5

6..18

19..31

32..44

45..57

58..70

71..83

84..96

97..109

110..122

123..135

136..148

149..161

162..174

175..187

188..200

201..213

214..226

227..239

240..255

| OFF

CUSTOM PRESET 1

CUSTOM PRESET 2

CUSTOM PRESET 3

CUSTOM PRESET 4

CUSTOM PRESET 5

CUSTOM PRESET 6

CUSTOM PRESET 7

CUSTOM PRESET 8

CUSTOM PRESET 9

CUSTOM PRESET 10 CUSTOM PRESET 11 Mark-II CUSTOM PRESET 12 Mark-II CUSTOM PRESET 13 Mark-II CUSTOM PRESET 14 Mark-II CUSTOM PRESET 15 Mark-II CUSTOM PRESET 16 Mark-II CUSTOM PRESET 17 Mark-II CUSTOM PRESET 18 Mark-II CUSTOM PRESET 19 Mark-II

|

–

|

–

|

–

|

YES

|

YES

|

YES

| | | 0..5| INACTIVE| –| –| –| YES| YES| YES
| | | 6..11| OFF| | | | | |
| | | 12..17| 50 ms| | | | | |
| | | 18..23| 100 ms| | | | | |
| | | 24..29| 240 ms| | | | | |
| | | 30..35| 400 ms| | | | | |
| | LED DELAY| 36..41| 600 ms| –| YES| YES| YES| YES| YES
| | | 42..47| 800 ms| | | | | |
| | | 48..53| 1000 ms (default)| | | | | |
| | | 54..59| 1200 ms| | | | | |
| | | 60..65| 1600 ms| | | | | |
| | | 66..71| 2000 ms| | | | | |
| 72..77| LINEAR| | | | | |
| | | 78..81| QUADRATIC| | | | | |
| | DIMMING CURVE| 82..83

84..85

| S Mark-II

HALO (default)

| –| YES| YES| YES| YES| YES
SERIVCE

(White, TW)

| | | 86..87

88.89

| GAMMA 2.6 Mark-II

GAMMA 2.8 Mark-II

| | | | | |
| 90..95| 600 Hz| | | | | |
or| OPTIONS

(here you set)

| | 96..101| 900 Hz| | | | | |
102..107| 1200 Hz (default)
SERVICE 2 (RGBW, 6C, 8C)| | OUTPUT FREQUENCY| 108..113| 2100 Hz|

–

|

YES

|

YES

|

YES

|

YES

|

YES

114..119| 4200 Hz
120..125| 6000 Hz
| | | 126..131| 10200 Hz| | | | | |
| | | 132..137| 15600 Hz| | | | | |
| | | 138..143| 19800 Hz| | | | | |
LED BOOST| 144..149| ON| –| YES| YES| YES| YES| YES
| | 150..155| OFF (default)
| 156..161| AUTO (default)| | | | | |
| | FAN MODE| 162..167| STANDARD| –| YES| YES| YES| YES| YES
| | | 168..173| SILENT| | | | | |
| 174..179| STANDARD (default)| | | | | |
| | DISPLAY ROTATION DISPLAY ON/FF| 180..185| ROTATED| –| YES| YES| YES| YES| YES
186..191| OFF
| | | 192..197| ON (default)| | | | | |
LED CALIBRATION| 198..203| COLOUR CALIBRATION (for all)| –| YES| YES| YES| YES| YES
| | NO FUNCTION (for White 300-700)
| | DEFAULT SETTINGS| 204..209| DEFAULT SETTINGS| –| YES| YES| YES| YES| YES
| | (for future use)| 210..255| FREE| –| YES| YES| YES| YES| YES

This channel allows to change via console all the settings that are normally set manually from the STAND ALONE and OPTIONS menu of the fixture

STROBE & STORE CHANNEL 

| White| White| TW| RGBW| 6C| 8C
---|---|---|---|---|---|---
| | 0| OFF| | | | | |
| STROBE| 1..150| from slow (3,86 s) to fast (30 ms)| –| YES| YES| YES| YES| YES
| | 151..200| OFF| | | | | |
| | 201..210| Once created the desired CUSTOM| | | | | |
STROBE & STORE| STORE 1| | PRESET, keep on hold for 5 seconds to store the new value.| –| –| –| YES| YES| YES
| | 211..230| OFF| | | | | |
| | 231..240| Once set the desired OPTION, keep on| | | | | |
| STORE 2|

241..255

| hold for 5 seconds to store the new value. OFF| –| YES| YES| YES| YES| YES

This channel allows to saving of what has been created/set in the related SERVICE channel

CCT CHANNEL

| TW| RGBW| 6C| 8C
---|---|---|---|---
LINEAR| PRESET| PRESET| LINEAR| STEP| PRESET| LINEAR| STEP| PRESET
NONE| ****

–

| ****

–

| 0..15| –| 0.. 4| 0..4| –| 0.. 4| 0..4
1500K| ****

–

| 0.. 0..| 5.. 7| 5.. 11| 0.. 0..| 5.. 7| 5.. 11
1500K-1600K| 1.. 7..| 8.. 11| –| 1.. 7..| 8.. 11| –
1600K| 8.. 8..| 12.. 14| 12.. 18| 8.. 8..| 12.. 14| 12.. 18
1600K-1700K| 9.. 15| 15.. 18| –| 9.. 15| 15.. 18| –
1700K| 16.. 16| 19.. 21| 19.. 25| 16.. 16| 19.. 21| 19.. 25
1700K-1800K| 17.. 23| 22.. 25| –| 17.. 23| 22.. 25| –
1800K| 24.. 24| 26.. 28| 26.. 32| 24.. 24| 26.. 28| 26.. 32
1800K-1900K| 25.. 31| 29.. 32| –| 25.. 31| 29.. 32| –
1900K| 32.. 32| 33.. 35| 33.. 39| 32.. 32| 33.. 35| 33.. 39
1900K-2000K| 33.. 39| 36.. 39| –| 33.. 39| 36.. 39| –
2000K| 40.. 40| 40.. 42| 40.. 46| 40.. 40| 40.. 42| 40.. 46
2000K-2100K| 41.. 47| 43.. 46| –| 41.. 47| 43.. 46| –
2100K| 48.. 48| 47.. 49| 47.. 53| 48.. 48| 47.. 49| 47.. 53
2100K-2200K| 49.. 55| 50.. 53| –| 49.. 55| 50.. 53| –
2200K| 56.. 56| 54.. 56| 54.. 60| 56.. 56| 54.. 56| 54.. 60
2200K-2300K| 57.. 63| 57.. 60| –| 57.. 63| 57.. 60| –
2300K| 64.. 64| 61.. 63| 61.. 67| 64.. 64| 61.. 63| 61.. 67
2300K-2400K| 65.. 71| 64.. 67| –| 65.. 71| 64.. 67| –
2400K| 72.. 72| 68.. 70| 68.. 74| 72.. 72| 68.. 70| 68.. 74
2400K-2500K| 73.. 79| 71.. 74| –| 73.. 79| 71.. 74| –
2500K| 80.. 80| 75.. 77| 75.. 81| 80.. 80| 75.. 77| 75.. 81
2500K-2600K| 81.. 86| 78.. 81| –| 81.. 86| 78.. 81| –
2600K| 87.. 87| 82.. 84| 82.. 88| 87.. 87| 82.. 84| 82.. 88
2600K-2700K| 88.. 93| 85.. 88| –| 88.. 93| 85.. 88| –
2700K| 0| 0..35| 16..45| 94.. 94| 89.. 91| 89.. 95| 94.. 94| 89.. 91| 89.. 95

2700K-3000K

| 2700K-2800K| ****

1..41

| ****

–

| ****

–

| 95.. 100..| 92.. 95| –| 95.. 100..| 92.. 95| –
2800K| 101.. 101| 96.. 98| 96.. 102| 101.. 101| 96.. 98| 96.. 102
2800K-2900K| 102.. 107| 99.. 102| –| 102.. 107| 99.. 102| –
2900K| 108.. 108| 103.. 105| 103.. 109| 108.. 108| 103.. 105| 103.. 109
2900K-3000K| 109.. 114| 106.. 109| –| 109.. 114| 106.. 109| –
3000K| 42| 36..70| 46..75| 115.. 115| 110.. 112| 110.. 116| 115.. 115| 110.. 112| 110.. 116

3000K-3200K

| 3000K-3100K| ****

43..83

| ****

–

| ****

–

| 116.. 121| 113.. 116| –| 116.. 121| 113.. 116| –
3100K| 122.. 122| 117.. 119| 117.. 123| 122.. 122| 117.. 119| 117.. 123
3100K-3200K| 123.. 128| 120.. 123| –| 123.. 128| 120.. 123| –
3200K (default)| 84| 71..105| 76..105| 129.. 129| 124.. 126| 124.. 130| 129.. 129| 124.. 126| 124.. 130

3200K-3500K

| 3200K-3300K| ****

85..125

| ****

–

| ****

–

| 130.. 135| 127.. 130| –| 130.. 135| 127.. 130| –
3300K| 136.. 136| 131.. 133| 131.. 137| 136.. 136| 131.. 133| 131.. 137
3300K-3400K| 137.. 142| 134.. 137| –| 137.. 142| 134.. 137| –
3400K| 143.. 143| 138.. 140| 138.. 144| 143.. 143| 138.. 140| 138.. 144
3400K-3500K| 144.. 149| 141.. 144| –| 144.. 149| 141.. 144| –
3500K| 126| 106..140| 106..135| 150.. 150| 145.. 147| 145.. 151| 150.. 150| 145.. 147| 145.. 151
3500K-4000K| 127..168| –| –| 151.. 156| 148.. 151| –| 151.. 156| 148.. 151| –
4000K| 169| 141..175| 136..165| 157.. 157| 152.. 154| 152.. 158| 157.. 157| 152.. 154| 152.. 158

4000K-5600K

| 4000K-5000K| ****

170..211

| ****

–

| ****

–

| 158.. 163| 155.. 158| –| 158.. 163| 155.. 158| –
5000K| 164.. 164| 159.. 161| 159.. 165| 164.. 164| 159.. 161| 159.. 165
5000K-5600K| 165.. 170| 162.. 165| –| 165.. 170| 162.. 165| –
5600K| 212| 176..210| 166..195| 171.. 171| 166.. 168| 166.. 172| 171.. 171| 166.. 168| 166.. 172

5600K-6500K

| 5600K-6000K| ****

213..254

| ****

–

| ****

–

| 172.. 177| 169.. 172| –| 172.. 177| 169.. 172| –
6000K| 178.. 178| 173.. 175| 173.. 179| 178.. 178| 173.. 175| 173.. 179
6000K-6500K| 179.. 184| 176.. 179| –| 179.. 184| 176.. 179| –
6500K| 255| 211..225| 196..225| 185.. 185| 180.. 182| 180.. 186| 185.. 185| 180.. 182| 180.. 186
6500K-8000K| ****

–

| ****

–

| –| 186.. 191| 183.. 186| –| 186.. 191| 183.. 186| –
8000K| 226..255| 192.. 192| 187.. 189| 187.. 193| 192.. 192| 187.. 189| 187.. 193
8000K-10000K| ****

–

| 193.. 198| 190.. 193| –| 193.. 198| 190.. 193| –
10000K| 199.. 199| 194.. 196| 194.. 200| 199.. 199| 194.. 196| 194.. 200
10000K-12000K| 200.. 205| 197.. 200| –| 200.. 205| 197.. 200| –
12000K| 206.. 206| 201.. 203| 201.. 207| 206.. 206| 201.. 203| 201.. 207
12000K-14000K| 207.. 212| 204.. 207| –| 207.. 212| 204.. 207| –
14000K| 213.. 213| 208.. 210| 208.. 214| 213.. 213| 208.. 210| 208.. 214
14000K-15000K| 214.. 219| 211.. 214| –| 214.. 219| 211.. 214| –
15000K| 220.. 220| 215.. 217| 215.. 221| 220.. 220| 215.. 217| 215.. 221
15000K-16000K| 221.. 226| 218.. 221| –| 221.. 226| 218.. 221| –
16000K| 227.. 227| 222.. 224| 222.. 228| 227.. 227| 222.. 224| 222.. 228
16000K-17000K| 228.. 233| 225.. 228| –| 228.. 233| 225.. 228| –
17000K| 234.. 234| 229.. 231| 229.. 235| 234.. 234| 229.. 231| 229.. 235
17000K-180000K| 235.. 240| 232.. 235| –| 235.. 240| 232.. 235| –
18000K| 241.. 241| 236.. 239| 236.. 242| 241.. 241| 236.. 239| 236.. 242
18000K-190000K| 242.. 247| 240.. 243| –| 242.. 247| 240.. 243| –
19000K| 248.. 248| 244.. 247| 243.. 249| 248.. 248| 244.. 247| 243.. 249
19000K-20000K| 249.. 254| 248.. 251| –| 249.. 254| 248.. 251| –
20000K

| 255.. 255| 252.. 255| 250.. 255| 255.. 255| 252.. 255| 250.. 255

ROSCO FILTERS CHANNEL MARK-II

| White| White| TW| RGBW| 6C| 8C
---|---|---|---|---|---|---

STANDARD

| 000| NONE| 060| ROSCO R0077| 120| ROSCO R4515| 180| ROSCO R4730| ****

–

| ****

–

| ****

–

| ****

–

| ****

YES

| ****

YES

001| ROSCO R0384| 061| ROSCO R0075| 121| ROSCO R4530| 181| ROSCO R0037
002| ROSCO R0383| 062| ROSCO R0376| 122| ROSCO R4560| 182| ROSCO R3308
003| ROSCO R0085| 063| ROSCO R0071| 123| ROSCO R0096| 183| ROSCO R3309
004| ROSCO R0083| 064| ROSCO R0092| 124| ROSCO R0012| 184| ROSCO R4715
005| ROSCO R0079| 065| ROSCO R3316| 125| ROSCO R4590| 185| ROSCO R0038
006| ROSCO R0080| 066| ROSCO R3315| 126| ROSCO R0010| 186| ROSCO R3313
007| ROSCO R2006| 067| ROSCO R0087| 127| ROSCO R0310| 187| ROSCO R0333
008| ROSCO R3220| 068| ROSCO R3304| 128| ROSCO R0313| 188| ROSCO R3314
009| ROSCO R2007| 069| ROSCO R0088| 129| ROSCO R0312| 189| ROSCO R3318
010| ROSCO R0084| 070| ROSCO R4415| 130| ROSCO R0014| 190| ROSCO R0351
011| ROSCO R0078| 071| ROSCO R0388| 131| ROSCO R0011| 191| ROSCO R0054
012| ROSCO R0081| 072| ROSCO R4430| 132| ROSCO R2003| 192| ROSCO R0051
013| ROSCO R0068| 073| ROSCO R0086| 133| ROSCO R0015| 193| ROSCO R0052
014| ROSCO R0368| 074| ROSCO R0089| 134| ROSCO R3441| 194| ROSCO R4915
015| ROSCO R0069| 075| ROSCO R0389| 135| ROSCO R3411| 195| ROSCO R4930
016| ROSCO R0065| 076| ROSCO R0386| 136| ROSCO R0316| 196| ROSCO R0356
017| ROSCO R0067| 077| ROSCO R4460| 137| ROSCO R3401| 197| ROSCO R0057
018| ROSCO R0367| 078| ROSCO R4490| 138| ROSCO R3407| 198| ROSCO R4960
019| ROSCO R0064| 079| ROSCO R2004| 139| ROSCO R0020| 199| ROSCO R0058
020| ROSCO R0375| 080| ROSCO R0090| 140| ROSCO R2002| 200| ROSCO R0357
021| ROSCO R0370| 081| ROSCO R0091| 141| ROSCO R0317| 201| ROSCO R0059
022| ROSCO R0366| 082| ROSCO R0122| 142| ROSCO R0318| 202| ROSCO R0336
023| ROSCO R0369| 083| ROSCO R0126| 143| ROSCO R0021| 203| ROSCO R4760
024| ROSCO R0072| 084| ROSCO R0393| 144| ROSCO R0023| 204| ROSCO R0044
025| ROSCO R0062| 085| ROSCO R0094| 145| ROSCO R0041| 205| ROSCO R0346
026| ROSCO R0063| 086| ROSCO R3406| 146| ROSCO R0040| 206| ROSCO R0349
027| ROSCO R0060| 087| ROSCO R3405| 147| ROSCO R0022| 207| ROSCO R0344
028| ROSCO R3206| 088| ROSCO R0099| 148| ROSCO R0019| 208| ROSCO R0039
029| ROSCO R0372| 089| ROSCO R0017| 149| ROSCO R0032| 209| ROSCO R0047
030| ROSCO R0373| 090| ROSCO R0321| 150| ROSCO R4690| 210| ROSCO R0348
031| ROSCO R3208| 091| ROSCO R0018| 151| ROSCO R0042| 211| ROSCO R0049
032| ROSCO R4315| 092| ROSCO R0303| 152| ROSCO R0127| 212| ROSCO R0048
033| ROSCO R3216| 093| ROSCO R0030| 153| ROSCO R0024| 213| ROSCO R0347
034| ROSCO R0053| 094| ROSCO R4660| 154| ROSCO R0325| 214| ROSCO R4990
035| ROSCO R3204| 095| ROSCO R3310| 155| ROSCO R0025| 215| ROSCO R0358
036| ROSCO R0360| 096| ROSCO R0031| 156| ROSCO R2001| 216| ROSCO R0056
037| ROSCO R4215| 097| ROSCO R0034| 157| ROSCO R0324| 217| ROSCO R0377
038| ROSCO R3203| 098| ROSCO R0331| 158| ROSCO R0026| 218| ROSCO R0385
039| ROSCO R0362| 099| ROSCO R4630| 159| ROSCO R0120| 219| ROSCO R2009
040| ROSCO R0371| 100| ROSCO R0304| 160| ROSCO R0124| 220| ROSCO R0353
041| ROSCO R0364| 101| ROSCO R0003| 161| ROSCO R0027| 221| ROSCO R0055
042| ROSCO R3202| 102| ROSCO R4615| 162| ROSCO R0050| 222| ROSCO R4230
043| ROSCO R3218| 103| ROSCO R0305| 163| ROSCO R4890| 223| ROSCO R0355
044| ROSCO R0365| 104| ROSCO R0005| 164| ROSCO R0332| 224| ROSCO R0378
045| ROSCO R0061| 105| ROSCO R0016| 165| ROSCO R0342| 225| ROSCO R4260
046| ROSCO R4330| 106| ROSCO R3408| 166| ROSCO R0045| 226| ROSCO R0359
047| ROSCO R0363| 107| ROSCO R0009| 167| ROSCO R0046| 227| ROSCO R4290
048| ROSCO R0066| 108| ROSCO R0002| 168| ROSCO R0339| 228| ROSCO R0082
049| ROSCO R0070| 109| ROSCO R0013| 169| ROSCO R2010| 229| ROSCO R0074
050| ROSCO R4360| 110| ROSCO R3442| 170| ROSCO R4790| 230| ROSCO R0381
051| ROSCO R4390| 111| ROSCO R0008| 171| ROSCO R0043| 231| ROSCO R2008
052| ROSCO R0073| 112| ROSCO R3409| 172| ROSCO R343| 232| ROSCO R0121
053| ROSCO R2005| 113| ROSCO R3443| 173| ROSCO R0036| 233| ROSCO R0125
054| ROSCO R0374| 114| ROSCO R0302| 174| ROSCO R4860| 234| ROSCO R0382
055| ROSCO R0093| 115| ROSCO R3444| 175| ROSCO R4830| 235| ROSCO R0397
056| ROSCO R0392| 116| ROSCO R3317| 176| ROSCO R0035| 236| ROSCO R3114
057| ROSCO R0095| 117| ROSCO R0006| 177| ROSCO R0337| |
058| ROSCO R0395| 118| ROSCO R3410| 178| ROSCO R4815| |
059| ROSCO R0076| 119| ROSCO R0007| 179| ROSCO R0033| |

CUSTOM

| 237| CUSTOM 1

CUSTOM 2

CUSTOM 3

CUSTOM 4

CUSTOM 5

| 242| CUSTOM 6

CUSTOM 7

CUSTOM 8

CUSTOM 9

CUSTOM 10

| 247| CUSTOM 11

CUSTOM 12

CUSTOM 13

CUSTOM 14

CUSTOM 15

| 252

253

254

255

| CUSTOM 16

CUSTOM 17

CUSTOM 18

CUSTOM 19

| ****

–

| ****

–

| ****

–

| ****

–

| ****

YES

| ****

YES

238| 243| 248
239| 244| 249
240| 245| 250
241| 246| 251

LEE FILTERS CHANNEL MARK-II

| White| White| TW| RGBW| 6C| 8C
---|---|---|---|---|---|---

STANDARD

| 000| NONE| 061| LEE 131| 122| LEE 232| 183| LEE 787| ****

–

| ****

–

| ****

–

| ****

–

| ****

YES

| ****

YES

001| LEE 071| 062| LEE 219| 123| LEE 147| 184| LEE 046
002| LEE 713| 063| LEE 241| 124| LEE 776| 185| LEE 113
003| LEE 120| 064| LEE 242| 125| LEE 604| 186| LEE 332
004| LEE 363| 065| LEE 728| 126| LEE 207| 187| LEE 748
005| LEE 085| 066| LEE 504| 127| LEE 441| 188| LEE 127
006| LEE 119| 067| LEE 730| 128| LEE 204| 189| LEE 148
007| LEE 716| 068| LEE 731| 129| LEE 236| 190| LEE 157
008| LEE 195| 069| LEE 213| 130| LEE 744| 191| LEE 192
009| LEE 715| 070| LEE 245| 131| LEE 285| 192| LEE 111
010| LEE 723| 071| LEE 733| 132| LEE 013| 193| LEE 036
011| LEE 721| 072| LEE 244| 133| LEE 009| 194| LEE 107
012| LEE 722| 073| LEE 138| 134| LEE 205| 195| LEE 110
013| LEE 079| 074| LEE 088| 135| LEE 442| 196| LEE 035
014| LEE 714| 075| LEE 505| 136| LEE 764| 197| LEE 247
015| LEE 132| 076| LEE 243| 137| LEE 103| 198| LEE 248
016| LEE 068| 077| LEE 121| 138| LEE 206| 199| LEE 249
017| LEE 075| 078| LEE 738| 139| LEE 763| 200| LEE 169
018| LEE 197| 079| LEE 122| 140| LEE 443| 201| LEE 136
019| LEE 712| 080| LEE 089| 141| LEE 223| 202| LEE 794
020| LEE 525| 081| LEE 139| 142| LEE 279| 203| LEE 170
021| LEE 200| 082| LEE 090| 143| LEE 003| 204| LEE 704
022| LEE 719| 083| LEE 736| 144| LEE 444| 205| LEE 052
023| LEE 500| 084| LEE 124| 145| LEE 246| 206| LEE 702
024| LEE 366| 085| LEE 735| 146| LEE 007| 207| LEE 137
025| LEE 283| 086| LEE 327| 147| LEE 513| 208| LEE 194
026| LEE 174| 087| LEE 740| 148| LEE 514| 209| LEE 058
027| LEE 201| 088| LEE 643| 149| LEE 010| 210| LEE 180
028| LEE 281| 089| LEE 642| 150| LEE 100| 211| LEE 701
029| LEE 501| 090| LEE 741| 151| LEE 101| 212| LEE 345
030| LEE 708| 091| LEE 746| 152| LEE 767| 213| LEE 703
031| LEE 502| 092| LEE 511| 153| LEE 104| 214| LEE 002
032| LEE 503| 093| LEE 653| 154| LEE 765| 215| LEE 795
033| LEE 218| 094| LEE 789| 155| LEE 102| 216| LEE 328
034| LEE 278| 095| LEE 512| 156| LEE 550| 217| LEE 048
035| LEE 203| 096| LEE 024| 157| LEE 015| 218| LEE 128
036| LEE 202| 097| LEE 025| 158| LEE 768| 219| LEE 793
037| LEE 061| 098| LEE 652| 159| LEE 179| 220| LEE 049
038| LEE 063| 099| LEE 017| 160| LEE 770| 221| LEE 126
039| LEE 725| 100| LEE 651| 161| LEE 020| 222| LEE 797
040| LEE 117| 101| LEE 134| 162| LEE 286| 223| LEE 798
041| LEE 140| 102| LEE 008| 163| LEE 208| 224| LEE 343
042| LEE 353| 103| LEE 779| 164| LEE 742| 225| LEE 700
043| LEE 144| 104| LEE 237| 165| LEE 287| 226| LEE 707
044| LEE 724| 105| LEE 747| 166| LEE 105| 227| LEE 181
045| LEE 118| 106| LEE 238| 167| LEE 021| 228| LEE 799
046| LEE 172| 107| LEE 176| 168| LEE 158| 229| LEE 508
047| LEE 183| 108| LEE 109| 169| LEE 777| 230| LEE 706
048| LEE 141| 109| LEE 790| 170| LEE 778| 231| LEE 199
049| LEE 161| 110| LEE 108| 171| LEE 780| 232| LEE 198
050| LEE 196| 111| LEE 773| 172| LEE 022| 233| LEE 710
051| LEE 165| 112| LEE 004| 173| LEE 135| 234| LEE 711
052| LEE 352| 113| LEE 152| 174| LEE 507| 235| LEE 142
053| LEE 143| 114| LEE 151| 175| LEE 781| 236| LEE 709
054| LEE 727| 115| LEE 153| 176| LEE 019| 237| LEE 053
055| LEE 729| 116| LEE 154| 177| LEE 164| 238| LEE 603
056| LEE 116| 117| LEE 506| 178| LEE 182| 239| LEE 602
057| LEE 354| 118| LEE 162| 179| LEE 106| 240| LEE 600
058| LEE 115| 119| LEE 650| 180| LEE 029| 241| LEE 601
059| LEE 323| 120| LEE 230| 181| LEE 026| |
060| LEE 322| 121| LEE 156| 182| LEE 027| |

CUSTOM

| 242| CUSTOM 1| 247| CUSTOM 6| 252| CUSTOM 11| | | ****

–

| ****

–

| ****

–

| ****

–

| ****

YES

| ****

YES

243| CUSTOM 2| 248| CUSTOM 7| 253| CUSTOM 12
244| CUSTOM 3| 249| CUSTOM 8| 254| CUSTOM 13
245| CUSTOM 4| 250| CUSTOM 9| 255| CUSTOM 14
246| CUSTOM 5| 251| CUSTOM 10|

PRESETS MARK-II

| White| ****

TW

| RGBW| 6C| 8C
---|---|---|---|---|---
White| COLOR| CCT| MANUAL PRESET| MANUAL COLOR| MANUAL CCT| MANUAL PRESET| MANUAL COLOR| MANUAL CCT
NONE| –| –| 000..035| 000..015| 000..000| 000..000| 0..4| 000..000| 000..000| 0..4
1500 K| ****

–

| ****

–

| ****

–

| | –| | ****

–

| 5..11| | ****

–

| 5..11
1600 K| | | 12..18| | 12..18
1700 K| | | 19..25| | 19..25
1800 K| | | 26..32| | 26..32
1900 K| | | 33..39| | 33..39
2000 K| | | 40..46| | 40..46
2100 K| | | 47..53| | 47..53
2200 K| | | 54..60| | 54..60
2300 K| | | 61..67| | 61..67
2400 K| | | 68..74| | 68..74
2500 K| | | 75..81| | 75..81
2600 K| | | 82..88| | 82..88
2700K| 016..045| 001..003| 89..95| 001..003| 89..95
2800 K| | | 96..102| | 96..102
2900 K| | | 103..109| | 103..109
3000K| 046..075| 004..006| 110..116| 004..006| 110..116
3100 K| | | 117..123| | 117..123
3200K| 076..105| 007..009| 124..130| 007..009| 124..130
3300 K| | | 131..137| | 131..137
3400 K| | | 138..144| | 138..144
3500K| | 010..012| 145..151| 010..012| 145..151
4000K| 136..165| 013..015| 152..158| 013..015| 152..158
5000 K| | | 159..165| | 159..165
5600K| 166..195| 016..018| 166..172| 016..018| 166..172
6000 K| | | 173..179| | 173..179
6500K| 196..225| 019..021| 180..186| 019..021| 180..186
8000K| 226..255| 022..024| 187..193| 022..024| 187..193
10000 K| | | 194..200| | 194..200
12000 K| | | 201..207| | 201..207
14000 K| | | 208..214| | 208..214
15000 K| | | 215..221| | 215..221
16000 K| | | 222..228| | 222..228
17000 K| | | 229..235| | 229..235
18000 K| | | 236..242| | 236..242
19000 K| | | 243..249| | 243..249
20000 K| | | 250..255| | 250..255
FULL WHITE| –| –| –| –| 025..027| –| –| 025..027| –| –
RED| ****

–

| ****

–

| 036..039| ****

–

| | | ****

–

| | | –
GREEN| 040..043| | | | |
BLUE| 044..047| | | | |
CYAN| 048..051| | | | |
YELLOIW| 052..055| | | | |
MAGENTA| 056..059| | | | |
LEE 063| LEE 179| | | 028..030| 127..129| 001..003| 100..102| 028..030| 127..129| 001..003| 100..102|
LEE 117| LEE 105| 112..115| | 031..033| 130..132| 004..006| 103..105| 031..033| 130..132| 004..006| 103..105|
LEE 353| LEE 158| | 160..163| 034..036| 133..135| 007..009| 106..108| 034..036| 133..135| 007..009| 106..108
LEE 172| LEE 778| | 208..211| 037..039| 136..138| 010..012| 109..111| 037..039| 136..138| 010..012| 109..111
LEE 118| LEE 135| | | 040..042| 139..141| 013..015| 112..114| 040..042| 139..141| 013..015| 112..114
LEE 141| LEE 019| | 064..067| 043..045| 142..144| 016..018| 115..117| 043..045| 142..144| 016..018| 115..117
LEE 165| LEE 164| 164..167| | 046..048| 145..147| 019..021| 118..120| 046..048| 145..147| 019..021| 118..120
LEE 068| LEE 106| 076..079| 096..099| 049..051| 148..150| 022..024| 121..123| 049..051| 148..150| 022..024| 121..123
LEE 197| LEE 026| | 068..071| 052..054| 151..153| 025..027| 124..126| 052..054| 151..153| 025..027| 124..126
LEE 132| LEE 046| 136..139| | 055..057| 154..156| 028..030| 127..129| 055..057| 154..156| 028..030| 127..129
LEE 079| LEE 332| | | 058..060| 157..159| 031..033| 130..132| 058..060| 157..159| 031..033| 130..132
LEE 715| LEE 793| | | 061..063| 160..162| 034..036| 133..135| 061..063| 160..162| 034..036| 133..135
LEE 119| LEE 128| 116..119| 128..131| 064..066| 163..165| 037..039| 136..138| 064..066| 163..165| 037..039| 136..138
LEE 120| LEE 111| | | 067..069| 166..168| 040..042| 139..141| 067..069| 166..168| 040..042| 139..141
LEE 713| LEE 157| | | 070..072| 169..171| 043..045| 142..144| 070..072| 169..171| 043..045| 142..144
LEE 071| LEE 148| 080..083| | 073..075| 172..174| 046..048| 145..147| 073..075| 172..174| 046..048| 145..147
LEE 729| LEE 024| | | 076..078| 175..177| 049..051| 148..150| 076..078| 175..177| 049..051| 148..150
LEE 116| LEE 008| 108..111| | 079..081| 178..180| 052..054| 151..153| 079..081| 178..180| 052..054| 151..153
LEE 115| LEE 134| 104..107| 140..143| 082..084| 181..183| 055..057| 154..156| 082..084| 181..183| 055..057| 154..156
LEE 131| LEE 147| 132..135| 152..155| 085..087| 184..186| 058..060| 157..159| 085..087| 184..186| 058..060| 157..159
LEE 323| LEE 004| | 060..063| 088..090| 187..189| 061..063| 160..162| 088..090| 187..189| 061..063| 160..162
LEE 735| LEE 154| | 156..159| 091..093| 190..192| 064..066| 163..165| 091..093| 190..192| 064..066| 163..165
LEE 090| LEE 169| | 168..171| 094..096| 193..195| 067..069| 166..168| 094..096| 193..195| 067..069| 166..168
LEE 139| LEE 136| | 144..147| 097..099| 196..198| 070..072| 169..171| 097..099| 196..198| 070..072| 169..171
LEE 089| LEE 170| | | 100..102| 199..201| 073..075| 172..174| 100..102| 199..201| 073..075| 172..174
LEE 122| LEE 137| | | 103..105| 202..204| 076..078| 175..177| 103..105| 202..204| 076..078| 175..177
LEE 738| LEE 058| | | 106..108| 205..207| 079..081| 178..180| 106..108| 205..207| 079..081| 178..180
LEE 088| LEE 180| | 172..175| 109..111| 208..210| 082..084| 181..183| 109..111| 208..210| 082..084| 181..183
LEE 138| LEE 126| 148..151| 124..127| 112..114| 211..213| 085..087| 184..186| 112..114| 211..213| 085..087| 184..186
LEE 100| LEE 797| | | 115..117| 214..216| 088..090| 187..189| 115..117| 214..216| 088..090| 187..189
LEE 010| LEE 798| | | 118..120| 217..219| 091..093| 190..192| 118..120| 217..219| 091..093| 190..192
LEE 101| LEE 707| 084..087| | 121..123| 220..222| 094..096| 193..195| 121..123| 220..222| 094..096| 193..195
LEE 104| LEE 181| | | 124..126| 223..225| 097..099| 196..198| 124..126| 223..225| 097..099| 196..198
CUSTOM 1| CUSTOM 11| ****

–

| ****

–

| 216..219| ****

–

| ****

–

| 226..228| ****

–

| 199..201| 229..231| ****

–

| 226..228| ****

–

| 199..201| 229..231| ****

–

CUSTOM 2| CUSTOM 12| 220..223| 229..231| 202..204| 232..234| 229..231| 202..204| 232..234
CUSTOM 3| CUSTOM 13| 224..227| 232..234| 205..207| 235..237| 232..234| 205..207| 235..237
CUSTOM 4| CUSTOM 14| 228..231| 235..237| 208..210| 238..240| 235..237| 208..210| 238..240
CUSTOM 5| CUSTOM 15| 232..235| 238..240| 211..213| 241..243| 238..240| 211..213| 241..243
CUSTOM 6| CUSTOM 16| 236..239| 241..243| 214..216| 244..246| 241..243| 214..216| 244..246
CUSTOM 7| CUSTOM 17| 240..243| 244..246| 217..219| 247..249| 244..246| 217..219| 247..249
CUSTOM 8| CUSTOM 18| 244..247| 247..249| 220..222| 250..252| 247..249| 220..222| 250..252
CUSTOM 9| CUSTOM 19| 248..251| 250..252| 223..225| 253..255| 250..252| 223..225| 253..255
CUSTOM 10| | 252..255| 253..255| 226..228| | 253..255| 226..228|

DELAY CHANNEL

| White| White| TW| RGBW| 6C| 8C
---|---|---|---|---|---|---
DELAY| 0..45| NONE (The LED delay follows the set on the menu display)| ****

–

| ****

YES

| ****

YES

| ****

YES

| ****

YES

| ****

YES

46..55| 0 ms
56..65| 50 ms
66..75| 100 ms
76..85| 150 ms
86..95| 200 ms
96..105| 240 ms
106..115| 300 ms
116..125| 350 ms
126..135| 400 ms
136..145| 450 ms
146..155| 500 ms
156..165| 550 ms
166..175| 600 ms
176..185| 800 ms
186..195| 900 ms
196..205| 1000 ms
206..215| 1200 ms
216..225| 1400 ms
226..235| 1600 ms
236..245| 1800 ms
246..255| 2000 ms

RDM (Remote Device Management)

–  Device Model ID

–  Product category

–  Software version

–  Number of DMX channels

–  DMX mode

–  DMX address

–  Number of sub-devices

–  Number of sensors

IDENTIFY_DEVICE| LED power on – allowing fixture identification
DMX_START_ADDRESS| DMX address setting/reading
SOFTWARE_VERSION_LABEL| Text description version sw
SUPPORTED_PARAMETERS| List of supported parameters
DMX_PERSONALITY| DMX mode setting
DMX_PERSONALITY_DESCRIPTION| Obtaining textual description of DMX mode
DEVICE_MODEL_DESCRIPTION| Text description of the device model
MANUFACTURER_LABEL| Text description manufacturer
SENSOR_DEFINITION SENSOR_VALUE| Display of the values read by the temperature sensor, expressed in tenths of Celsius degree

This section shows the values that can be queried remotely through the RDM console.

Error list (Mark-II)

Error message| What does it mean?| White| White| TW| RGBW| 6C| 8C
---|---|---|---|---|---|---|---
LED NTC SENSOR ERROR| Incorrect sensor operation NTC LED|

–

|

YES

|

YES

|

–

|

YES

|

YES

LED NTC OVERTEMPERAURE| Overheating of the sensor working temperature NTC LED
MICRO NTC SENSOR ERROR| Incorrect sensor operation NTC MICRO
MICRO NTC OVERTEMPERAURE| Overheating of the sensor working temperature NTC MICRO
DRIVER1 NTC SENSOR ERROR| Incorrect sensor operation NTC DRIVER1
DRIVER1 NTC VERTEMPERAURE| Overheating of the sensor working temperature NTC DRIVER1
DRIVER2 NTC SENSOR ERROR| Incorrect sensor operation NTC DRIVER2
DRIVER2 NTC VERTEMPERAURE| Overheating of the sensor working temperature NTC DRIVER2
LOW SUPPLY VOLTAGE| The measured main voltage is below the threshold
HIGH SUPPLY VOLTAGE| The measured main voltage is above the threshold
OUT LED1 ERROR| Incorrect chain operation LED OUT 1
OUT LED.. ERROR| Incorrect chain operation LED OUT ..
OUT LED8 ERROR| Incorrect chain operation LED OUT 8
ENCODER BUS ERROR| Communication error with encoder board

how to…

… SET DMX ADDRESS AND CHOOSE DMX PERSONALITY

In order to control one or more fixtures via console, it is necessary to assign each one a DMX ADDRESS and choose a DMX PERSONALITY based on the parameters of the luminaire you want to control and the channels available on the console.

The first fixture is assigned to address channel = 1 and occupies as many channels as indicated in the chosen DMX chart.

·      DMX SETTINGS   DMX ADDRESS = 001

·      DMX SETTINGS   DMX PERSONALITY = EASY / 3CH (example)

If the second fixture is given the same address channel and the same personality, it will behave like the first luminaire; otherwise, it is necessary to assign it the first free channel as address and choose the desired personality.

·      DMX SETTINGS   DMX ADDRESS = 004 (example)

·      DMX SETTINGS   DMX PERSONALITY = HSIC 8bit / 7CH (example)

|

… EMULATE THE PERFORMANCE OF A HALOGEN LAMP
To satisfy the most nostalgic lighting designers and to guarantee the natural perception that the human eye, it is not enough that a LED source can simulate the static light of a halogen lamp, but it is also important to reproduce its dynamic behavior

First of all choose a DMX PERSONALITY that allows to set CCT = 3200K Then there are three behaviors to guarantee:

· The typical dimming curve of the halogen lamp: OPTIONS   DIMMING CURVE = HALO

· The standard delay of the halogen lamp: OPTIONS   LED DELAY = 1000 ms

·      the typical dim to warm to which a halogen lamp tends when decreasing the lighting emission (also called amber shift): OPTIONS

AMBER SHIFT = ON

|

… INCREASE THE LIGHT OUTPUT +20%
All the fixtures are designed to work in a context of balance between luminous efficiency and optimal thermal regime so as not to cause the LED to work under stress. Where available, thanks to the LED BOOST function, the algorithm favors luminous efficiency (+20% in light output) to the detriment of thermal efficiency, giving more current to the LED, but it is exclusively compatible with FAN MODE = AUTO (= the fans are automatically adjusted based on the LED temperature).

That means that, even with this function active, the LED TEMPERATURE function regulates the light intensity in case of overtemperature to avoid an early deterioration of the source.

It may happen that you need a light emission of the individual channels higher than the factory settings, without exceeding the maximum power of the fixture.

When for a tint or a CCT not all LED channels are at full, an algorithm increases the light output to achieve maximum efficiency of the luminaire. A microprocessor monitors the working temperature of all the components and updates the source control parameters in real time.

·      OPTIONS   FAN MODE = AUTO

·      OPTIONS   LED BOOST = ON

|

… SET THE FAN MODE
In order to function properly, the LED requires a cooling system, which can be passive (dissipation of heat by natural convection) or active (forced dissipation of heat using a fan).

FAN MODE:

·      AUTO : the fans are automatically adjusted based on the LED temperature.(where variable fan noise is not a critical parameter)

·      STANDARD : the fans are always kept at the default value (where constant background noise is required without varying brightness)

·      SILENT : the fans are always kept at the minimum value and in case of critical temperatures of the LED it automatically reduces the brightness

The silent mode function allows to intervention on the speed and therefore on the noise of the fans based on the internal temperatures of work detected by a thermostat

OPTIONS   FAN MODE = SILENT

|

… SET THE DISPLAY
To avoid unwanted light emission of the display it is recommended to turn it off: OPTIONS   DISPLAY = OFF

If the fixture is mounted “upside down” it is also possible to rotate the display to make it easier to read: OPTIONS   DISPLAY ROTATION = ROTATED

|
… REMOVE FLICKERING EFFECT IN CAMERAS
The flickering effect is manifested in the shooting when the emission frequency of the LED conflicts with the camera brush scan and can be solved by acting on the fixture parameters (or on the camera ones).

OPTIONS   OUTPUT FREQUENCY = xxx (find by trial and error – fine adjustment – the value that removes the flicker in the camera)

|
… CALIBRATE LED COLORS

When using a group of fixtures it may happen that one or more of them, despite being set with the same DMX values, has a color component (i.e.: RED) to be calibrated to align its tint to the ones of the other luminaires:

LED CALIBRATION   RED CALIBRATION

|

… SET THE COLOUR CUSTOM PRESETS
You may want to recall a tint from the factory library or need to create your own tint. In all LED color fixtures there are two libraries:

·      STANDARD PRESETS

·      CUSTOM PRESETS

Both of these presets can be recalled by turning the encoder (CCT/COLOR WHEEL) on the back of the fixture or selecting the corresponding DMX value from the console.

To create a CUSTOM PRESET by using the fixture:

STANDALONE   CUSTOM PRESETS   CUSTOM PRESET 1   RED = 255 (i.e.)   CONFIRM

To create a CUSTOM PRESET by using a DMX console:

·      First of all choose a DMX PERSONALITY that allows to set the SERVICE channel (i.e. DMX PERSONALITY = RGBACL for a 6C fixture)

· To create the CUSTOM PRESET 1: modify the DMX value of the SERVICE channel (ch 9) entering a DMX value 6..30 and create the desired tint by using the other channels (ch 1-7)

·      to save the tint: modify the DMX value of the STROBE & STORE channel (ch 8) entering a DMX value 201..210 and keep on hold for 5 seconds

|

… SET STANDALONE AND MASTER-SLAVE FUNCTIONS
May happen the need to control one or more fixtures without using a console.

The fixture allows operator to create one or more scenes, both in STANDALONE and MASTER-SLAVE. In case of single fixture, set the fixture according to the number of scenes to be created:

·      STANDALONE   STANDALONE SET   STANDALONE MANUAL (for 1 scene)

·      STANDALONE   STANDALONE SET   STANDALONE SCENE MODE (for multi scenes)

In case of a group of fixtures, set the master fixture according to the number of scenes to be created:

·      STANDALONE   STANDALONE SET   MASTER MANUAL (for 1 scene)

·      STANDALONE   STANDALONE SET   MASTER AUTO SCENE (for multi scenes) and set the slave fixture(s):

·      STANDALONE   STANDALONE SET   SLAVE

How to create a single scene:

STANDALONE   MANUAL MODE   RED = 020 (i.e.)   CONFIRM

How to create and manage multiple scenes:

·      create the first scene STANDALONE   AUTO SCENE MODE   CREATE NEW

·      and choose the POSITION

·      then choose the tint (i.e. RED = 100%) STANDALONE   AUTO SCENE MODE SCENE 1   SCENE SET   RED = 255 (i.e.)

CONFIRM

·      create the second scene STANDALONE   AUTO SCENE MODE   CREATE NEW

·      and choose the POSITION

·      then choose the tint (i.e. GREEN = 100%) STANDALONE   AUTO SCENE MODE SCENE 1   SCENE SET   GRN = 255 (i.e.)

CONFIRM

How to customize the parameters of a scene:

STANDALONE   AUTO SCENE MODE   SCENE 2   PAUSE TIME = 1.0 s (i.e.) STANDALONE AUTO SCENE MODE   SCENE 2   FADE TIME = 2.2 s (i.e.)

How to delete a scene:

STANDALONE   AUTO SCENE MODE   SCENE 2   SCENE DELETE

|

FUNZIONI AVANZATE SULLA GESTIONE DEL COLORE
·      Plus/Minus Green – si tratta di una funzione che consente una regolazione fine della componente verde del CCT selezionato per

adeguarlo alle specifiche esigenze dell’applicazione.

·      Bilanciamento automatico del colore durante l’intera dimmerazione per mantenere la stessa tinta quando diminuisce l’emissione di luce; l’algoritmo consente di:

o    mantenere fissa la lunghezza d’onda di ogni singolo chip LED colorato

o    mantenere costante il rapporto delle emissioni luminose tra i LED di diverso colore al variare dell’emissione luminosa

·      Booster

·  calibration

|

This section shows the most common needs of a lighting designer and how to set the main functions.

… SET DMX ADDRESS AND CHOOSE DMX PERSONALITY

Logistics

Fixture|

Packing

|

HS Code

---|---|---

Power

|

Type

|

Code

| Weight (kg)| Dimensions (cm)| Weight (kg)| Dimensions (cm)
Length| Width| Height| Length| Width| Height

50W

|

Fresnel

| FN LED 50 CW / WW|

3

|

22

|

16

|

13

|

3,5

|

40

|

22

|

22

|

94054210

FN LED 50 RGBW
PC| PC LED 50 CW / WW| 27|

51

|

26

|

26

Profile| PR LED 50 ZS WW / RGBW| 4| 40| 5

Accessories

| TC MINI| 0,1| 10| 0,4| 10| 0,1| 10| 0,4| 10|

94059900

PL 4 MINI| 0,4| 15,5| 11,5| 3,3| 0,5| 18| 13| 4,4
PGM MIZO| 0,1| 15,3| 6,7| 5| 0,1| 15,3| 6,7| 5

100W

| Fresnel| FN HY LED 100 CW / WW|

3,5

|

31

|

22

|

29

|

4,1

|

38,5

|

22,5

|

18,5

|

94054210

PC| PC HY LED 100 CW / WW

Profile

| PR HY LED 100 ZS CW / WW| 6,2| 54|

34

|

40

| 7,6|

57

|

27,5

|

27,5

PR HY LED 100 ZW CW / WW| 6| 45| 7,4

Accessories

| TC HY 100| 0,1| 14| 0,4| 14| 0,1| 14| 0,4| 14|

94059900

PL 4 HY 100| 0,8| 22,5| 17| 3,5| 0,9| 24,5| 19| 5,5
DIA HY 100| 0,3| 8,5| 10,5| 2,5| 0,3|

21

| 13| 5
PGB R 100| 0,1| 21| 10| 0,5| 0,1| 10| 0,5

200W

|

Fresnel

| FN HY LED 200 CW / WW| 6| 36|

30

| 35| 6,7|

46,5

|

31,5

|

38

|

94054210

FN HY LED 200 TW / RGBW / 6C| 7,5| 45| 39| 8,7

PC

| PC HY LED 200 CW / WW| 6| 36| 35| 6,7
PC HY LED 200 TW / RGBW / 6C| 7,5| 45| 39| 8,7

Profile

| PR HY LED 200 ZS CW / WW / TW / RGBW / 6C| 11,5| 76|

34

|

47

| 13,5| 92| 36| 40
PR HY LED 200 ZW CW / WW / TW / RGBW / 6C| 11| 64| 12,5| 82| 34| 37

Accessories

| TC HY 200| 0,1| 18,5| 0,4| 18,5| 0,1| 18,5| 0,4| 18,5|

94059900

PL 4 HY 200| 1| 28,5| 21| 4| 1,1| 34| 23| 5,5
DIA HY 200| 0,2| 21,7| 12| 1,3| 0,3| 25| 18| 1,5
PGB HY 200| 0,1| 24| 9,5| 0,4| 0,1| 24| 9,5| 0,4
PR HY OP ZS| 6,2| 48|

25,5

|

23

| 7,6| 71| 36| 40
PR HY OP ZW| 5,2| 36| 6,5| 46,5| 31,5| 38

300W

| Fresnel| FN HY LED 300 CW / WW / TW / 6C| 9,5| 48|

30

| 43| 10,9|

71

|

36

|

40

|

94054210

PC| PC HY LED 300 CW / WW / TW / 6C| 12,5| 57|

47

| 13,5

Profile

| PR HY LED 300 ZS CW / WW / TW / 6C| 15| 76|

34

| 18,5|

92

PR HY LED 300 ZW CW / WW / TW / 6C| 14| 64| 18
Followspot| FS HY LED 300 CW| 19| 100| 35| 35| 22| 115| 40
Cyclorama| CYC LED 300 RGBW| 15| 57| 43| 25| 18,2| 61| 57| 33
Accessories| TC HY 300| 0,3| 25| 0,4| 25| 0,3| 25| 0,4| 25|

94059900

PL 4 HY 300| 1,7|

38

|

27

|

3,5

| 1,7|

42

|

29

|

5,5

PL 8 HY 300|

2

|

2

PL 4 HY 300 PLUS

700W

| Fresnel| FN HY LED 700 CW / WW / TW / 8C| 18| 60|

40

|

50

| | | | |

94054210

PC| PC HY LED 700 CW / WW / TW / 8C| 20| 69| | | |

Profile

| PR HY LED 700 ZS CW / WW / TW / 8C| 31| 127|

47

| | | |
PR HY LED 700 ZW CW / WW / TW / 8C| 28| 92| | | |
Followspot| FS HY LED 700 CW| 36| 144| 42| | | |

Accessories

| TC HY 700| 0,4| 30| 30| 0,4| 0,4| 30| 30| 0,4|

94059900

PL 4 HY 700| | | | | | | |
DIA HY 700| | | | | | | |
PGB HY 700| | | | | | | |

The following table shows the weights and dimensions of the fixtures and the relative packaging.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>