SAMSUNG GP-TOS911SA Camera Grip Stand for Gadget Cover User Manual
- October 30, 2023
- Samsung
Table of Contents
SAMSUNG GP-TOS911SA Camera Grip Stand for Gadget Cover
Product Description
- Camera grip stand for gadget cover
- Photo button
- Tripod
- Indicator light
- Phone cover adapter
- Push button
Product Specifications
- Product Name: Camera grip stand for gadget cover
- Model No: GP-TOS911SA
- Battery Capacity: 75 mAh
- Weight: 86g
- Material: PC / silica gel / zinc alloy
- Bluetooth version: 5.0
- Place of Origin: China
Product Usage Instructions
- Power on the Camera Grip Stand by long pressing the power button for 3 seconds.
- Turn on the phone Bluetooth to enter search mode.
- Search for Camera Grip Stand in the available devices list and click on it.
- The green light of the remote control will turn off after the connection is established.
- To use the tripod, pick out the bottom tripod with your fingers.
- Pull out the tripod and place it on a tabletop.
- Press down the button to take photos using the photo button.
Camera grip stand for gadget cover
Product Description
Contents
- Camera grip stand for gadget cover * 1
- User Manual * 1
Instruction of operation
- Power on after long pressing the power button for 3 seconds, then turn on the phone bluetooth to enter search condition, and click “Camera Grip Stand” in the searched equipment. Green light of the remote control will be off after connected .
- Align the adapter on the back of the cover with the bracket and rotate the adapter 45° to install .
- Pick out the bottom tripod with your fingers .
- Puling out the tripod and place it on a tabletop .
- Holding down the push knob and rotating the cover 45°, then remove the product .
Replace the battery
Remove the remote control, turn the remote control to the back, push out the
bottom cover with the card aimed at the pinhole on the bottom of the remote
control, and then pull out the bottom cover by hand to replace the button
battery .
Product Specifications
FCC statements
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- (1)this device may not cause harmful interference, and
- (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE : The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications or changes to this
equipment. Such modifications or changes could void the user’s authorityto
operate the equipment.
The device has been evaluated to meet general RF exposure requirement, The
device can beused in portable exposure condition without restriction. Made in
China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>