viveroo REV20220117 one Wallbox Installation Guide

June 9, 2024
viveroo

viveroo REV20220117 one Wallbox

Product Information

Viveroo One is a product that allows you to mount an iPad on a wall or other surface. It comes with an installation guide and can be installed using a wallbox or directly mounted. The product is designed to be used in enclosed and dry living spaces, and it is important to follow the instructions and recommendations provided to ensure proper use and maximum enjoyment. All electrical installation work must be conducted by authorized, trained electricians, always adhering to the general rules and regulations applying to electrical installation. The product is compatible with various iPad models, including iPad mini, iPad Pro, and iPad Air. It comes with a power supply unit that can be connected to a 100-240V AC outlet or a USB power adapter. For POE, it requires Lightning or USB-C PD+Gigabit Data input.

Product Usage Instructions

  1. Read the assembly instructions included carefully before installing the mounting set.
  2. Read the Viveroo One user manual completely before using it.
  3. Follow the instructions and recommendations to ensure proper use and maximum enjoyment of the product.
  4. Mount the Viveroo One using a wallbox or directly mounted. The installer is responsible for selecting the proper mounting location and safe installation of the product.
  5. All electrical installation work must be conducted by authorized, trained electricians, always adhering to the general rules and regulations applying to electrical installation.
  6. The product is compatible with various iPad models, including iPad mini, iPad Pro, and iPad Air.
  7. Connect the power supply unit to a 100-240V AC outlet or a USB power adapter. For POE, it requires Lightning or USB-C PD+Gigabit Data input.
  8. If safe operation of the product is not assured, take it out of service and secure it against potential misuse.
  9. If the product functions are limited, blocked or disabled, if an unusual odor is present, if noises such as scratching are audible or if damage is visible, the safe operation can no longer be guaranteed.
  10. Removal from the power supply must be done via the circuit breaker in the respective rooms.

Safety information

Important Please read the assembly instructions included carefully before installing the mounting set. Please also read the one user manual completely before using your one. Please follow the instructions and recommendations to ensure proper use and maximum enjoyment.

Safety information one and all one mounting sets are intended for use in enclosed and dry living spaces.
The following conditions must be provided:

  • Operating temperature between 0° C (32° F) and 35° C (95° F).
  • Relative humidity (during use): 20 % to 90 %, non-condensing.
  • No external environmental influences such as oil, chemicals, salt, extensive dust, etc.

Installation, service or repairs, if necessary, may only be performed by
authorized persons.
The maximum altitude is 2.000m.
The installer is responsible for selecting the proper mounting location and safe installation of one. This also applies to installation in movable parts, such as doors. The installer is responsible for performing and documenting all necessary safety tests. All electrical installation work may only be conducted by authorized, trained electricians, always adhering to the general rules and regulations applying to electrical installation. Should it become apparent that safe operation of one is not assured, then one must immediately be taken out of service and secured against potential misuse. If the one functions are limited, blocked or disabled, if an unusual odor is present, if noises such as scratching are audible or damage is visible, safe operation can no longer be guaranteed.

Technical data

Product contents

  • Installation guide Inwall
  • Power supply unit (IN: 100-240 Vac, 50/60 Hz, OUT: 5,2 Vdc) or USB Power Adapter USB-C: 100-240Vac, 50/60Hz, PD 3.0, up to 18W
  • For POE:
    • Lightning: IN: (IEEE 802.3af) 44-57V, 12W, OUT: 5V, 10/100 Data
    • USB-C: IN: PoE+ (IEEE 802.at), 25W, OUT: USB-C PD+Gigabit Data

Compatability
Electrical operation of viveroo products is permitted only in connection with a viveroo MountingSet and power supply and cable included in the MountingSet. Operation of viveroo products without a MountingSet will lead to immediate loss of guarantee and warranty.

Measurements in millimeter

  • Measurements design cover one for …
    • iPad mini
    • iPad 10.2 inch, Air (2019), Pro 10.5 inch 225 x 143
    •  iPad Pro 11 inch/ Air 10.9 inch 277 x 173
    • iPad Pro 12.9 inch 275 x 178 307 x 215
    • Depth 15
    • Size of opening (for flush-mounted box) elongated hole 68×139
    • Installation depth (for flush-mounted box) 75

Weight in gram one for …

  • … iPad mini 4/5 740
  • … iPad 10.2 inch (09/2019), Pro 10.5 inch Air (2019), 866
  • … iPad Pro 11 inch 952
  • … iPad Pro 12.9 inch 1.118

Electrical connections

  • Power supply 100-240 Vac
  • Power consumption 50-60 Hz

12,5Watt – 18Watt, depending on iPad and power supply

  • Removal from one may be removed from the power supply via the circuit breaker in
  • power supply the respective rooms.

Technical changes and mistakes are excepted. Apple, iPad and Lightning are registered trademarks of Apple Inc.

Installation with wallbox (100-240V or POE)

  • Step 1 one can be installed either in portrait or landscape position, it is your choice.
    • For installation in landscape position: Make an elongated hole in the wall (68mmx139mm). Use a holesaw (two holes next to each other with 68mm diameter, center distance 71mm).
    • For installation in portrait position: Use a holesaw and make two holes among each other with 68mm diameter, center distance 71mm. The backside of the flush-mount box can be used as a template. The depth should be approximately 75mm.
    • ! Important: This installation guide shows the installation process for a drywall. Here one is installed in landscape position.
  • Step 2 Cut a hole for the cable in the flush-mount box. Use the diagonal surfaces of the box for the cut. (See photo.) Cut the hole from the back side of the box. Make the hole correspond to the size needed for the cable. If needed please prepare a second hole for the network LAN cable.

optional article: One with network connection via POE. Not for retrofit. Please order together with one.

  • Step 3 Insert the wallbox with the pre-installed installation disc into the opening in the wall. Pull 10-15 cm of the power cable through the opening.

For free in landscape position:
The integrated level will show you the 12 o’clock “UP” position. Adjust the flush mount box according to the level. (Final adjustments can be made at a later time.)

For free in portrait position:
The integrated level is in 3 o’clock position. Use an external level to align the box vertically.

  • Step 4 For drywall installation: Fasten the flush-mount box to the wall. For stone or solid wall installation:  Let the black installation disc be mounted so that the flush-mounted box is not deformed in any way.
  • ! IMPORTANT: During installation, pay attention that the flush mount box is fastened parallel to the surface and is not shifted or offset in the wall.
  • ! IMPORTANT: It is important that the flush-mounted box is not deformed in any way. Do not use any foaming installation materials that may put pressure on the box and deform it.
  • Step 5 Remove the installation disc by loosening the screws.
  • Step 6 For 100-240V connection

For PoE connection
Unlike the 230V connection, the power supply via the network cable is not a separate part in the article of the MountingSet, but directly on the iPad holder. Please continue with the user manual of one.

Step 7 Re-insert the installation disc with the three screws! Important: Make sure that no cables are jammed between the flush mounting box and the installation disc. After completing installation, please make sure that the free is solidly secured to the wall.

Now you can install the one. Please see the corresponding user manual.

Product dimensions and position of wallbox

  • one for … … iPad mini
  • … iPad 10.2 inch, Air (2019), Pro 10.5 inch
  • … iPad Pro 11 inch/ Air 10.9 inch
  • … iPad Pro 12.9 inch

Technical drawing

viveroo-REV20220117-one-Wallbox-fig-8

side view
from left to right: wallbox, wall, wall spacer, one

back view
! Attention: Measurements show free for iPad 9.7 inch. Measurements for other generations on the previous page. The size of free varies depending on the iPad generation. Mounting plate is always the same, it allows you to change iPad generation easily.

Scale-ready drilling template at www.viveroo.com/downloads

Installation direct mounting

The one can be attached directly to the wall via 3 points. A distance from the wall ensures a secure hold and compensates for any unevenness. Use the enclosed dowels and screws for installation in concrete or solid wall. Use the drilling templates to optimally position the one against the wall. Download at: www.viveroo.com/downloads

viveroo-REV20220117-one-Wallbox-fig-10

Notes on PoE splitters

PoE Splitter for iPads with Lightning connector

Note: Use orange wallbox and installation plate to fix viveroo free on the wall. Put the white PoE splitter into the orange box. Please also note the enclosed instructions of the PoE Adapter. Connect the adapter to a PoE Switch or injector with IEEE802.3at standard.

PoE Adapter for iPads with USB-C connector

Note: Use the orange wall box and installation plate to fix viveroo free on the wall. Put the white PoE splitter into the orange box. Please also note the enclosed instructions of the PoE Adapter. Connect the adapter to a PoE Switch or injector with IEEE802.3at standard. viveroo-REV20220117-one-
Wallbox-fig-12

Installation guide viceroy one, wall box 100-240V or POE, direct mounting

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals