TELRAN 435009 MPPT Solar Controller 30A 100V with LCD screen User Guide

TELRAN 435009 MPPT Solar Controller 30A 100V with LCD screen

Features

• With the advanced dual-peak or multi-peak tracking technology, when the solar panel is shadowed or part of the panel fails to result in multiple peaks on the I-V curve, the controller is still able to accurately track the maximum power point.
• A built-in maximum power point tracking algorithm can significantly improve the energy utilization efficiency of photovoltaic systems, and raise the charging efficiency by 15% to 20% compared with the conventional PWM method.
• A combination of multiple tracking algorithms enables accurate tracking of the optimum working point on the I-V curve in an extremely short time.
• The product boasts an optimum MPPT tracking efficiency of up to 99.9%.
• Advanced digital power supply technologies raise the circuit’s energy conversion efficiency to as high as 98%.
• Charging program options are available for different types of batteries including gel batteries, sealed batteries, open batteries, lithium batteries, etc.
• The controller features a limited current charging mode. When the solar panel power exceeds a certain level and the charging current is larger than the rated current, the controller will automatically lower the charging power and bring the charging current to the rated level.
• Instantaneous large current startup of capacitive loads is supported.
• Automatic recognition of battery voltage is supported.
• LED fault indicators and an LCD screen that can display abnormality information help users quickly identify system faults.
• A historical data storage function is available, and data can be stored for up to a year.
• The controller is equipped with an LCD screen with which users can not only check device operating data and statuses but also modify controller parameters.
• The controller supports standard Modbus protocol, fulfilling the communication needs of various occasions.
• The controller employs a built-in over-temperature protection mechanism. When the temperature surpasses the set value, the charging current will decline in linear proportion to the temperature so as to curb the temperature rise of the controller, effectively keeping the controller from being damaged by overheating.
• Featuring a temperature compensation function, the controller can automatically adjust charging and discharging parameters in order to extend the battery’s service life.
• TVS lighting protection.

Wiring diagram is as below

LCD Startup and Main Interface

Product Operation and Display

Led Indicators

PV array indicator:

BAT indicator:

over-discharged
Quick flashing (a cycle of 0.2s with on and off each lasting for 0.1s)| Battery over-voltage

LOAD indicator:

overloaded/ short-circuited
Steady on| Load functioning normally

ERROR indicator:

Key Operations

Set

| ****

Enter into sub-menu; set/ save Turn on/ off loads (in manual mode)

Product Dimension

• Product dimensions: 238× 173× 72.5mm
• Hole positions: 180× 147mm
• Hole diameter: 3mm
• Applicable wire: max. 8 AWG

Product Specification Parameters

Electric Parameters

800W/24V

Conversion efficiency| ≤98%
MPPT tracking efficiency| ＞99%
Temperature compensation factor| -3mv/℃/2V（default）
Operating temperature| -35℃ to +45℃
Protection degree| IP32
Weight| 2Kg
Communication method| RS232
Altitude| ≤ 3000m
Product dimensions| 238 ×173 ×72.5mm

Battery Type Default Parameters

(parameters set in monitor software)
Parameters cross-reference table for different types of batteries

Voltage to set Battery type| Sealed lead-acid battery| Gel lead-acid battery| Open lead-acid battery| User

(self- customized)

---|---|---|---|---
Over-voltage cut-off voltage| 16.0V| 16.0V| 16.0V| 9~17V
Equalizing voltage| 14.6V| ——| 14.8V| 9~17V
Boost voltage| 14.4V| 14.2V| 14.6V| 9~17V
Floating charging voltage| 13.8V| 13.8V| 13.8V| 9~17V
Boost return voltage| 13.2V| 13.2V| 13.2V| 9~17V
Low-voltage cut-off return voltage| 12.6V| 12.6V| 12.6V| 9~17V
Under-voltage warning return voltage| 12.2V| 12.2V| 12.2V| 9~17V
Under-voltage warning voltage| 12.0V| 12.0V| 12.0V| 9~17V
Low-voltage cut-off voltage| 11.1V| 11.1V| 11.1V| 9~17V
Discharging limit voltage| 10.6V| 10.6V| 10.6V| 9~17V
Over-discharge time delay| 5s| 5s| 5s| 1~30s
Equalizing charging duration| 120minutes| ——| 120minutes| 0~600minutes

Equalizing charging interval

|  |  | 0~250D

(0 means the equalizing charging function is disabled)

 | 30days| 0days| 30days
Boost charging duration| 120minutes| 120minutes| 120minutes| 10〜600minutes

When selecting User, the battery type is to be self-customized, and in this case, the default system voltage parameters are consistent with those of the sealed lead-acid battery. When modifying battery charging and discharging parameters, the following rule must be followed:

• Over-voltage cut-off voltage＞ Charging limit voltage ≥ Equalizing voltage ≥ Boost voltage ≥ Floating charging voltage ＞Boost return voltage;
• Over-voltage cut-off voltage ＞ Over-voltage cut-off return voltage;
• Low-voltage cut-off return voltage ＞ Low-voltage cut-off voltage ≥ Discharging limit voltage;
• Under-voltage warning return voltage ＞Under-voltage warning voltage ≥ Discharging limit voltage;
• Boost return voltage ＞Low-voltage cut-off return voltage.

Product Details

References

• Home

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>