DELTACO SH-P01E Smart Plug User Manual
- October 30, 2023
- DELTACO
Table of Contents
SH-P01E Smart Plug
Product Information
The Maximum RF output (EIRP) is a measure of the power that a radio transmitter can emit in a specific direction, taking into account the power gain of the antenna. This measure is important for ensuring that the radio signal does not interfere with other signals or exceed regulatory limits.
Product Usage Instructions
When using the product, it is important to keep the Maximum RF output (EIRP) within the regulatory limits for your specific location. To do this, follow these steps:
- Check the regulatory limits for your location.
- Determine the Maximum RF output (EIRP) of the product.
- Adjust the product settings to ensure that the Maximum RF output (EIRP) does not exceed the regulatory limits.
- Test the product to ensure that it is functioning properly and within regulatory limits.
If you have any questions or concerns about using the product, please refer to the user manual or contact customer support for assistance.
Contents
- On/Off/reset button
- LED indicator for on/off status
Reset
Press and hold about 6 seconds for reset. LED flashes quickly.
Install and use
- Download and install the app ‘Deltaco smart home’ from Apple App Store or Google Play Store on your mobiledevice.
- Launch the app ‘Deltaco smart home·.
- Create a new account or log in to your existing account.
- Tap “+” to add the device.
- Choose category and then the type of product from the list.
- Connect the device to power.
- If the LED lamp does not flash: Reset the device. If the status indicator flashes: Confirm in the app.
- Confirm the Wi- Fi network and password.
- Enter the device name.
If you want to add the product to Google Home or Amazon Alexa, search for “Deltaco Smart Home” in the Google Home or Amazon Alexa app and login to your □eltaco Smart Home account. You might need to choose “discover devices” or add the product manually in the Google Home or Amazon Alexa app before you can use it.
Add service to Google home
- Add the device to google home.
- Add the service “Deltaco Smart Home”.
Add device to Amazon Alexa
Use the menu ‘Skills & Games” and search for ‘Deltaco Smart Home’. Enable the
app and login. Use discover to add the device.
Cleaning and maintenance
- Do not use cleaning solvents or abrasives.
- Do not clean the inside of the device.
- Do not attempt to repair the device. If the device does not operate correctly, replace it with anew device.
- Clean the outside of the device using a soft cloth.
Support
More product information can be found at www.deltaco.eu.
Contact us by e-mail: help@deltaco.eu.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>