DELTACO VLOG-100 Wireless Vlogging Microphone User Manual
- October 30, 2023
- DELTACO
Table of Contents
DELTACO VLOG-100 Wireless Vlogging Microphone
Product Information
The VLOG-100 is a wireless vlogging microphone with a USB-C charge port, on/off button, and USB-C connector for connecting to USB-C devices. It also features a Lightning connector for devices that use Lightning. The microphone has a green LED light, and the receiver has a red LED light. The microphone can be muted with a double-click on the on/off button, and the LED light will turn off when mute is active. The battery level is indicated by an orange flashing LED light. The USB-C charge port on the receiver is intended for charging your device, and it supports 5V/1A(5W).
Product Usage Instructions
- To power on the microphone, short press on the on/off button. The LED flashes green.
- To power off the microphone, press and hold the on/off button for about 3 seconds. The LED turns off.
- To pair the microphone with your device, power on the microphone, then connect the receiver to your phone (or other USB-C/Lightning connector device). The microphone will flash green, and the receiver will flash red. Wait a few seconds and the devices will pair automatically.
- If your device does not automatically recognize the microphone, you may need to change microphone settings in the app you are using.
- To charge the microphone, connect a USB-C cable to the USB-C charging port on the microphone. During charging, the LED will be static orange. When charging is completed, the orange light will turn off.
- If your device has a Lightning connector, first connect the Lightning adapter to the USB-C receiver. Then connect the receiver (with the Lightning adapter now attached) to your device. The adapter must be connected face up, so the symbols on the adapter are on the same side as your device’s screen.
- To mute or unmute the microphone, double-click the on/off button. The LED will turn off when mute is active and turn on when mute is off.
For more information about the warranty and product support, please visit www.deltaco.eu or contact them via email at help@deltaco.eu.
OVERVIEW
- USB-C charge port (for microphone)
- On/off button
- USB-C charge port (on the receiver intended for your device)
- USB-C connector (connect this to your USB-C device)
- Lightning connector (for devices that use Lightning)
On/off
- To power on, short press on the on/off button (LED flashes green).
- To power off, press and hold the on/off button for about 3 seconds (LED turns off).
Pairing
Power on the microphone, then connect the receiver to your phone (or other USB-C/Lightning connector device). The microphone will flash green, and the receiver will flash red. Wait a few seconds. The devices will pair automatically. The microphone will have green static light, and the receiver will have red static light. On some phones or devices, you might have to change microphone settings in the app you are using to this microphone (depends on the device and app in use).
Charging
- When the battery is low, the LED will flash orange.
- To charge the microphone, connect a USB-C cable to the USB-C charging port on the microphone.
- During charging, the LED will be static orange.
- When charging is completed the orange light will turn off.
- The USB-C charge port on the receiver is for charging your device.
- Connect a USB-C cable and USB power adapter to charge. Supports 5V/1A(5W).
Lightning connector
If your device has a Lightning connector, then first connect the Lightning adapter to the USB-C receiver. Then connect the receiver (with the Lightning adapter now attached) to your device. The adapter must be connected face up. So, the symbols on the adapter are on the same side as your device’s screen.
Mute microphone
Double click the on/off button to mute or unmute the microphone (The LED will
turn off when mute is active and turn on when mute is off).
Warranty
Please, see www.deltaco.eu for warranty information.
Support
More product information can be found at
www.deltaco.eu. Contact us by e-mail:
help@deltaco.eu.
SIMPLIFIED EU DECLARATION OF CONFORMITY
The simplified EU declaration of conformity referred to in Article 10(9) shall be provided as follows: Hereby, DistIT Services AB declares that the radio equipment type wireless device is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.aurdel.com/compliance/.
Disposal
Disposal of electric and electronic devices EC Directive 2012/19/EU This
product is not to be treated as regular household waste but must be returned
to a collection point for recycling electric and electronic devices. Further
information is available from your municipality, your municipality’s waste
disposal services, or the retailer where you purchased your product.
DistIT Services AB, Glasfibergatan 8, 125 45 Älvsjö, Sweden
DistlT Services AB, Suite 89, 95 Mortimer Street, London, W1W 7GB, England