NOTAVEL NT1180 TV Bench Instructions
- October 30, 2023
- NOTAVEL
Table of Contents
**NOTAVEL NT1180 TV Bench Instructions
**
ASSEMBLY INSTRUCTIONS
- Marking with product code and number of parts on the apparent ribbons can be removed with cloth and alcohol.
- For complaints always have the product label with the batch number and manufacturing date at hand
- Mr. Assembler, please check parts before assembling. We only replace products before put together.
TOOLS FOR ASSEMBLY AND INSTALLATION
Tools not supplied
-
ELETRIC SCREW DRIVER
-
PHILLIPS SCREWDRIVER
-
HAMMER
-
TAPE
-
Assembly
-
Installation
ATTENTION: We suggest assembling the products on the packaging to avoid scratches on the parts
PARTS LIST
PRODUCT°
CODE| ITEM| DESCRIPTION| MATERIAL| PART CODE| | LENGTH| WIDTH| THICK
CiTY.
M–1180| 1| LOWER BASE| MDP| 43561-01| 1| 1356| 358| 25
M–1180| 2| | MDP| 43562-02| 2| 357| 357| 15
R1GHT/LEFT SICE
M–1180| 3| Oriental DWISORY| MCP| 43563-03| 2| 171| 324| 15
M–1180| 4| CENTRAL Shelf| MDP| 43564-04| 1| 1321| 356| 15
M–1180| 5| | MDP| 43566-05| 1| 1356| 358| 25
Upper TOP
M–1180| 6| PORTA DESLIZANTE I RERTA CORRECERAISLCING DOOR| MDP| 43567-06| 2|
673| 164| 15
M–1180| 7| Sliding Door| I-CF| 43568-07| 1| 1340| 195| 3
M–1180| 10| Lower BOTTOM| I-CF| 43611-10| 1| 1340| 195| 3
M–1180| 8| ACCESSORIES SET| | 43569-08| 1| | |
LIST OF HARDWARE
A 6X30MM WOODEN DOWEL **16
**
AN 6X50MM WOODEN DOWEL **2
C 12X9mm MINI-FIX BARREL 20
GG MINI CHALK 25x8mm **20
**
W 3.5X20MM FLAT HEAD SCREW **16
**
R 15MM PLASTIC ADHESIVE HOLE COVER **12
**
B 5X31mm MINI-FIX SCREW **16
D 23X4MM NAIL **33
**
F U-RAIL 1321mm **2
**
PE FOOT PLASTIC RETRO STICK **4
K SLIDING DOOR GUIDE **2
**
BB PIN MINI FIX 61 mm DOUBLE **2
E METALIC BOTTOM JUNCTION 13X13mm **10
**
WARRANTY TERM
This warranty shall be applied within the time limits specified herein, by presentation of this certificate and invoice. In order for the product to be covered by the warranty provided in this document, the client should follow the following guidelines and precautions for assembly, maintenance and cleaning.
ASSEMBLY
Assembly must be carried out according to the instructions in the assembly manual which is supplied with the product at the time of delivery.
For proper use and conservation of this furniture, mistreatment should be avoided, such as hitting doors and drawers, dragging or scratching the furniture, excessive moisture or heat to avoid possible changes in its original color.
Problems from improper use of the products as breaking of the furniture due to the excess weight by installation of granite, marble, and others will not be the responsibility of Notável Móveis
-
The weight withstood by each shelf/drawer must comply with the values indicated in illustration.
It will not be responsibility of the Notável Móveis either problem from -
Electrical or hydraulic installations.
-
Actions of termites or other pests.
-
Storage and moving of the furniture in inappropriate places and not fumigated periodically
-
Any trimming or alteration in the furniture.
-
Use of cleaning agents or abrasives not recommended.
UPKEEPAND CLEANING
For durability, it is recommended that the furniture be cleaned this way:
In the outer parts (doors, sides and drawer front), inside, glass and mirrors, the cleaning should be done with a cloth clean and lightly moistened with mild soap and water. Then a clean, dry cloth should be used.
In case of transfer of the furniture to a different place, this can only be done by specialized professionals, and for the moving of the furniture it is necessary that it is lifted off the ground. It should not be dragged because malfunctions due to handle and moving are not covered by the warranty.
STEP 1
- Insert the dowels A (6x30mm) into parts 2, 3, and 4.
- Insert the minifix pins B into parts 2.
STEP 2
- Insert the rails F into the channel of parts 1 and 4.
- Insert the minifix pins B in the parts 1 and 5.
STEP 3
- Fit part 2 to part 1. Fit the minifix C barrels to part 2 and rotate until they lock
STEP 4
- Slide part 3 into part 1. Slide the mini-fix C barrels into part 3 and rotate until they lock.
- Insert the AN pins into part 3.
STEP 5
- Attach part 4 to part 2 and 3. Attach the minifix C drums to part 4 and rotate until they lock.
STEP 6
- Fit part 2 into part 1 and 4. Fit the mini-fix C barrels into part 2 and 4, then turn until it locks.
- Fit minifix BB pins into part 4, passing through part 3.
- Fit the minifix C drums in the part 3 and turn until locking.
STEP 7
- Fit part 3 to part 4. Fit C-drums into part 3, then rotate until it locks.
- Attach part 5 to parts 2 and 3. Attach the C drums to part 2 and 3, then rotate until it locks.
- Glue the R stickers over all the C drums
STEP 8
- Align the PE feet to the markings on part 1 and secure with the W screws (3.5x20mm).
STEP 9
- Align the K kit guides to the top markings on part 6 and secure with the kit screws. (NOTE: Place the screw into the guide setting and do not over tighten as it will be tightened when the part is in place on the product).
- Align the K pulleys to the bottom of the part 6 and secure them with the kit screws.
STEP 10
- Fit the pieces 6 into the product.
STEP 11
- Now that part 6 is in its right place, from the back of the product we will tighten the guides of the K kit that were placed in the previous steps, to set the correct adjustment.
STEP 12
- Align the bottoms 7 and 10 on the product. Fix them with the D nails.
- At the junction between backs use the fasteners E together with the nails D.