NOTAVEL NT1185 Panel Instruction Manual

ASSEMBLY INSTRUCTIONS
PAINEL NT1185
CAPACIDADE TV | CAPACIDAD TV | TV SIZE: 50”

• The TV should be attached to the Panel. Do not use the niche-only TV.

NT1185 Panel

1. The marking of the lot number and part code that appears on the tapes is easily removed with school rubber or with cloth and alcohol.
2. For complaints always have the product label with the batch number and manufacturing date at hand.
3. Mr. Assembler, please check parts before assembling. We only replace products before put together.

TOOLS FOR ASSEMBLY AND INSTALLATION

Tools not supplied

| | | |
---|---|---|---|---
DRIVER| NIVEL| PHILLIPS
SCREWDRIVER| HAMMER| TAPE
Assembly| Installation
---|---
|

ATTENTION: We suggest assembling the products on the packaging to avoid scratches on the parts.

PARTS LIST

CODE| ITEM| DESCRIPTION| MATERIAL| PART CODE| QTY.| LENGTH| WIDTH| THICK
---|---|---|---|---|---|---|---|---
NT1185| 1| LOWER PANEL| MDP| 43571-01| 1| 1356| 438| 15
NT1185| 2| CENTER PANEL| MDP| 43572-02| 1| 1356| 438| 15
NT1185| 3| TOP PANEL| MDP| 43573-03| 1| 1356| 184| 15
NT1185| 4|  TOP SHELF| MDP| 43574-04| 1| 1352| 173| 25
NT1185| 5| CLOSING VIEW| MDP| 43575-05| 2| 1060| 69| 15
NT1185| 6| LOCK VISION| MDP| 43576-06| 1| 296| 74| 15
NT1185| 7| 45° WALL BRACKET| MDP| 43577-07| 1| 1060| 78| 15
NT1185| 8| 45° PANEL SUPPORT| MDP| 43578-08| 1| 1060| 78| 15
NT1185| 9| ACCESSORIES SET| .| 43579-09| 1| –| –| –

LIST OF HARDWARE

WARRANTY TERM

This warranty shall be applied within the time limits specified herein, by presentation of this certificate and invoice.
In order for the product to be covered by the warranty provided in this document, the client should follow the following guidelines and precautions for assembly, maintenance and cleaning.

ASSEMBLY

Assembly must be carried out according to the instructions in the assembly manual which is supplied with the product at the time of delivery.
For proper use and conservation of this furniture, mistreatment should be avoided, such as hitting doors and drawers, dragging or scratching the furniture, excessive moisture or heat to avoid possible changes in its original color. Problems from improper use of the products as breaking of the furniture due to the excess weight by installation of granite, marble, and others will not be the responsibility of Notável Móveis

• The weight withstood by each shelf/drawer must comply with the values indicated in illustration.
  It will not be responsibility of the Notável Móveis either problem from:

• Electrical or hydraulic installations installations.

• Actions of termites or other pests.

• Storage and moving of the furniture in inappropriate places and not fumigated periodically.

• Any trimming or alteration in the furniture.

• Use of cleaning agents or abrasives not recommended.

UPKEEP AND CLEANING

For durability, it is recommended that the furniture be cleaned this way:
In the outer parts (doors, sides and drawer front), inside, glass and mirrors, the cleaning should be done with a cloth clean and lightly moistened with mild soap and water. Then a clean, dry cloth should be used.
In case of transfer of the furniture to a different place, this can only be done by specialized professionals, and for the moving of the furniture it is necessary that it is lifted off the ground. It should not be dragged because malfunctions due to handle and moving are not covered by the warranty.

STEP 1

1. Fit pins A (6×30 mm) to the base of parts 4

STEP 2

1. Apply SC glue and fix part 5 to parts 1,2 and 3 using the W screws (3,5×25 mm)
2.  Fix part 6 on parts 1 and 2 with screws W (3,5×25 mm)

STEP 3

1. Fix the EE junctions on the parts 1 and 2, using the PP screws (3,5×40 mm)

STEP 4

1. Apply SC glue on piece 8
2. Fit pieces 4 and 8 to piece 2. Fix part 8 with the PD screws (4,5×60 mm) that will go through to part 4 and secure it

STEP 5

1. Fit the PS grommet to part 1

STEP 6

1. If you want the panel to be at a distance of 650 mm from the floor, you must position piece 7 on the wall and at a distance of 1424 mm between the floor and the beginning of piece 7 as in the drawing below;
2. Pass the drill bit through the 5 mm holes of piece 7 to mark the wall, remove piece 7 and insert the BP plugs into the wall;
3. Fix part 7 on the wall with PJ screws (6X70mm), then fit the niche on the wall support.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>