HENN 16-119 Berco Mini Bed Watercolor Instruction Manual

HENN 16-119 Berco Mini Bed Watercolor Instruction Manual

WARNING READ WITH ATTENTION AND SAVE FOR EVENTUAL CONSULTATIONS

1. Warnings: Do not position or use the product near open flame and other sources of heat such as electric heaters, gas heaters or other sources as the material is flammable.

2. Do not use the crib if any part is broken, torn or missing. Use only replacement parts recommended by the manufacturer.

3. Do not leave any object in or near the crib that may serve as a foothold or risk of suffocation, choking or strangulation, such as ropes, blinds / curtain cords, protectors, cushions, toys, wires and cables of electrical appliances.

4. Never use more than one mattress in the crib.

5. Small children may not play, unattended, in the vicinity of a crib.

6. Caution: when the child is able to climb the crib, it can no longer be used by this child, as this crib was built for use by children with motor ability to sit, kneel and / or get up alone but not yet  able to climb the crib.

7. For cribs with more than one function, not subject to regulation: This product complies with regulations for baby cribs, and its other functions are not subject to regulation.

8. This crib can not be altered, either in its structure or in its adornments, because risks to the child’s safety can be generated.

9. The length and width of the mattress used with the crib must comply with the specifi cations of this Manual.

10. Guidelines: The Brazilian Society of Pediatrics advises to place the baby to sleep on his belly up, as it reduces the risk of sudden death by 70%. We recommend talking to your child’s pediatrician for more information.

11. Only use the crib when fully assembled in accordance with the instructions in the Instruction Manual and after making sure that your locking systems are properly engaged.

12. The crib must be placed on a horizontal fl oor.

13. For cribs with adjustable base height: The lowest position is the safest and the base should always be used in this position as soon as the baby is old enough to sit.

14. When there are detachable supporting devices to support the crib base above its lowest position: Before the crib is used in its lowest position, the devices used to support the crib in the highest positions should be removed.

15. The mounting connections must always be tightened properly and checked regularly, throughout the use of the crib, and retightened as necessary.

16. If any part of the crib breaks or is defective, you should look for expert technical assistance and no home repairs.

17. Guidelines for the thickness of the mattress, which may be given in the following ways:
    (a) The length and width of the mattress used with the crib shall be such that it is never possible to form a space greater than 30 mm between the sides or ends and the mattress.
    (b) The thickness of the mattress shall be such that the inner height (from the mattress surface to the upper edge of the cradle frame) is at least 480 mm in the lowest position of the cradle base and at least 180 mm in the highest position of the cradle of the crib.
    (c) When a marking is used on the crib to indicate the maximum thickness of the mattress: The marking on the crib indicates the maximum thickness of the mattress to be used with the crib. IX) Recommendation on the size of the mattress to be used with the crib. For the Mini Cama Cama Aquarela, the use of a 1,30 m ± 0.5 cm mattress is recommended length, 70 cm ± 0,5 cm wide and 12 cm ± 0,5 cm high, with a minimum density of 18 kg / m³ ± 2,0 kg / m³ (D18).

THE INMETRO REGISTRATION AND THE CONFORMITY IDENTIFICATION SEAL REFER ONLY TO THE CRIB

ASSEMBLY INSTRUCTIONS

Assembly Requirements

Images for illustration only

NOTICE
To clean your furniture, use a dry or wet cloth, and do not use chemicals that may damage your product.

ASSEMBLY SYSTEM
The products’ assembly system works according to the increasing order of the indicated numbers. For example: 01, 02, 03, 04 … to the end of the assembly.

List of part

Hardware

Assembly Requirements

Images for illustration only

NOTICE
To clean your furniture, use a dry or wet cloth, and do not use chemicals that may damage your product.

ASSEMBLY SYSTEM
The products’ assembly system works according to the increasing order of the indicated numbers. For example: 01, 02, 03, 04 … to the end of the assembly.

Recommended maximum weights with evenly distributed.

List of part

Hardware

Assembly Requirements

Recommended maximum weight with distributed load.

Images for illustration only

NOTICE
To clean your furniture, use a dry or wet cloth, and do not use chemicals that may damage your product.

ASSEMBLY SYSTEM
The products’ assembly system works according to the increasing order of the indicated numbers. For example: 01, 02, 03, 04 … to the end of the assembly.

List of parts

07

|

1/2

|

01

| Bottom underside with label|

780x425x15

08| 1/2| 02| Crib Frame| 1301x36x22
09| 1/2| 01| Smaller upper side| 780x310x15
10| 1/2| 01| Larger top side| 780x560x15
11| 2/2| 02| Top frame| 783x50x20
12=15| 1/2| 01| Fixed Rail| 1300x670x25
13| 2/2| 01| 6mm Larges base Frame with seal| 680x420x6
14| 2/2| 02| 6mm Largest Base Frame| 680x420x6
15=12| 1/2| 01| Fixed Rail| 1300x670x25
16| 1/2| 01| Mosquito net support| 1320mm
17=21| 2/2| 02| Rear lath| 619x122x12
18| 2/2| 02| Front of drawer| 646x172x15
19| 2/2| 04| Side of drawer| 350x122x12
20| 2/2| 02| Drawer bottom| 606x361x3
21| 2/2| 02| Rear lath| 619x122x12

Hardware

Documents / Resources

| HENN 16-119 Berco Mini Bed Watercolor [pdf] Instruction Manual
16-119 Berco Mini Bed Watercolor, 16-119, Berco Mini Bed Watercolor, Mini Bed Watercolor, Bed Watercolor, Watercolor
---|---

References

• Qual a diferença entre móveis modulados e planejados?

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>