EZE K1 Fast Wireless Charging Dock User Guide
- October 30, 2023
- EZE
Table of Contents
Wireless Charging Dock
Quick Start Guide
Compatible with Kindle Paperwhite
Signature Edition
Packing List
| List | Quantity |
|---|---|
| 1.Wireless charging dock | 1 PCS |
| 2.User manual | 1 PCS |
| 3.Type-C charging cable | 1 PCS |
| 4.Adapter | 1 PCS |
Specification
Input: 5V/3A, 9V/2A
Output: 15W (max) /10W/7.5W
Input Interface: Type-C
LED Indicator Light
| Indicator Light | Device Condition |
|---|---|
| Red indicator light on, off after 5 seconds | Charging dock is powered up |
| Blue indicator light on | Device starts charging |
| Red indicator light flashes | Metal substance detected |
| Red indicator light flashes | Overvoltage/Undervoltage/ anomalies |
| Indicator light is off | Charging dock standby or power off |
Device
cannot be placed horizontally
Do not
exceed 4mm protective case
FAQ
Q: What should I do if the charger doesn't work or charge devices intermittently?
Please check the in the following ways: 1. Please make sure your devices have wireless charging function and can be charged wirelessly. 2. Please use the adapter and cable provided in the package. 3. Please check if the charging indicator light is on, if not, please unplug and reinsert the adapter and cable. 4. Please using the other QC3.0 adapter and charging cable to check if the adapter and cable are damaged. 5. Please make sure the thickness of Protective Cover
Q: What if charging is slowly?
1. Please make sure to use the QC3.0 adapter and cable provided in the package. 2. Charging efficiency depends on the receiving power of your devices.
Q: What if charger heats up while charging Kindle?
1. It is normal for the receiving coil or transmitter board to generate heat during wireless charging. If the charger is too hot, please take your Kindle off from charger to wait the charger to cool down and charge again. 2. It is recommended to avoid using the charger in high temperature and sun exposure environments as possible. If there is any other issues, please contact our AFTER-SALES for solution.
SAFETY NOTICE
- Please use the Type-C cable provided in the package.
- Do not put metal objects or magnetic cards on the charging pad which may cause damage or abnormality to the charging station.
- If the charging station overheats and stops charging during use, please remove the charging device and try charging after cooling down.
- Please do not use this product in high temperature, humidity and corrosive environment.
- Avoid dropping the product from high places.
- Do not disassemble the product by yourselves. Please contact us if necessary.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.