hama 00121776 2 Way HDMI Splitter Instruction Manual

: October 30, 2023
: Hama

hama 00121776 2 Way HDMI Splitter

hama-001217762-Way-HDMI-Splitter-Instruction-product

Product Information

The HDMITM Splitter is a device that allows you to split one HDMI signal into two separate signals. This device has one HDMI input and two HDMI outputs and supports HDMI resolutions up to 2160P at 24/30Hz and 1080p/1080i/720p//576p//576i/480p/480i at 24/50/60Hz. It also supports various audio formats, including DTS-HD, Dolby-trueHD, LPCM7., DTS, Dolby-AC3, and DSD HD(HBR). The HDMITM Splitter can be powered via the USB cable connection to the AV devices or using an external USB power supply unit (not included).

Product Usage

Connect the HDMI input of the HDMITM Splitter to the HDMI output of your source device (e.g. Set-top box, DVD/Blu-ray player).
Connect one end of an HDMI cable to each of the HDMI outputs on the HDMITM Splitter.
Connect the other end of each HDMI cable to your display devices (e.g. Flat TV, Beamer).
Power the HDMITM Splitter using the USB cable connection to the AV devices or using an external USB power supply unit (not included).
Switch on all devices.
Select the correct channel on your display device to view the output from your source device.

product Troubleshooting

Problem: No picture
Solution: Please check whether all cables are connected correctly, whether the correct channel is set in the output device, and whether all devices are switched on.
Problem: No sound
Solution: Check to make sure that all devices are connected properly and switched on.

Product Care and Maintenance

Only clean this product with a slightly damp, lint-free cloth, and do not use aggressive cleaning agents.

product Warranty Disclaimer

Hama GmbH & Co. KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

OVERVIEW

hama-001217762-Way-HDMI-Splitter-Instruction-fig-1

CONNECTION

hama-001217762-Way-HDMI-Splitter-Instruction-fig-2

Operating instruction

Thank you for choosing a Hama product. Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.

Explanation of Warning Symbols and Notes

Warning

This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

Note

This symbol is used to indicate additional information or important notes.

Package Contents

HDMI splitter with integrated USB cable
Operating instructions

Safety Notes

The product is intended for private, noncommercial use only.
Use the product for its intended purpose only.
Protect the product from dirt, moisture and overheating, and only use it in a dry environment.
Children should be supervised to ensure that they do not play with the device.
Do not bend or crush the cable.
Do not drop the product and do not expose it to any major shocks.
Dispose of packaging material immediately according to locally applicable regulations.
Do not modify the product in any way. Doing so voids the warranty.
Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
Do not open the device or continue to operate it if it becomes damaged.
Do not use the product in the immediate vicinity of heaters or other heat sources or in direct sunlight.
Use the item only in moderate climatic conditions.
Package Contents
HDMI splitter with integrated USB cable
Operating instructions
Keep this product, as all electrical products, out of the reach of children!
Do not use the product in moist environments and avoid splashes.
Lay all cables so that they do not pose a tripping hazard.

Functions

Output: 2 HDMI sockets
Input: 1 HDMI plug
Plug and play installation (no software necessary)

Installing/connecting two HDMI playback devices

Connect the HDMI plug to your HDMI source device (for example, Blu-ray or set-top box).
Connect your two HDMI playback devices (for example, flat-screen TV and projector, or flatscreen TV and flat-screen TV) to the HDMI sockets using an HDMI cable (not included).
Connect the USB cable to an unused USB port on your TV or set-top box.
Alternatively, use an external USB power supply unit for power supply.
Switch on the desired source and playback devices.

Note
For cable lengths of over 10 m, repeaters must be used in order to ensure playback quality.

Troubleshooting

Problem	Solution
No picture	Please check …

– whether all cables are connected correctly

– whether the correct channel is set in the output device

– whether all devices are switched on

No sound| Check to make sure that all devices are connected properly and swit- ched on.

Care and Maintenance

Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents.

Warranty Disclaimer

Hama GmbH & Co. KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or failure to observe the operating instructions and/or safety notes.

Technical Data

Connections| 1 HDMI input

2 HDMI outputs

---|---
HDMI

resolutions

| 24/30Hz/2160P, 24/50/60Hz/

1080p/1080i/720p//576p//

576i/480p/480i

Supported audio formats| DTS-HD/Dolby-TrueHD/ LPCM7./DTS/Dolby-AC3/ DSD HD(HBR)
Supports HDMI cable up to 10 m in length
Power (5 V) is supplied via the USB cable connection to the AV devices or using an external USB power supply unit (not included).

Hama GmbH & Co KG

86652 Monheim/Germany Service & Support
www.hama.com
+49 9091 502-0

All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.