oe electrics INSTR1213 Connecting QikFit Modules and Power Supplies User Guide
- June 4, 2024
- oe electrics
Table of Contents
oe electrics INSTR1213 Connecting QikFit Modules and Power Supplies
Instructions
NOTE: Schuko QikFit shown. All QF modules connect similarly.
Cut locking clip as shown below
Using pliers remove both parts of locking clips from modules
Note: Care should be taken not to damage the modules when removing the locking clips
Remove QF3 from right hand side of unit one using pliers
Clip units one and two together
View the video here: QikFit Power Modules or search for connecting two QikFit Euro modules on YouTube
Contact US
UK
sales@oeelectrics.co.uk
+44 (0) 1924 367 255
AUS
sales@oeelsafe.com.au
1300 ELSAFE (357 233)
DE
info@oeelectrics.de
+49 (0)2261 958 3001
U.S.A
sales@oeelectrics.com
+1 (844)-927-0600
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>