hama 00184084 Bluetooth Headphones Instruction Manual

October 30, 2023
Hama

hama 00184084 Bluetooth Headphones Instruction Manual
Bluetooth Headphones

Operating Instructions

Thank you for choosing a Hama product. Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.

Controls and displays

Overview

  1. + button
  2. – button
  3. Microphone
  4. Multi-function button (MFB)
  5. Status LED
  6. Audio input (3.5 mm)
  7. Micro-USB connection

Explanation of warning symbols and notes

Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or important notes.

Package contents

Cable
Package contents

1x “Freedom Lit” Bluetooth® on-ear headphones
1x micro-USB charging cable
1x quick guide
1x warning and safety instructions

Safety instructions

  • The product is intended for private, noncommercial use only.
  • Use the product only for the intended purpose.
  • Children should be supervised to ensure that they do not play with the product.
  • Do not use the product in areas in which electronic products are not permitted.
  • Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
  • Do not open the device or continue to operate it if it becomes damaged.
  • Do not bend or crush the cable.
  • Do not drop the product and do not expose it to any major shocks.
  • Dispose of packaging material immediately in accordance with the locally applicable regulations.
  • Do not modify the product in any way. Doing so voids the warranty.
  • Protect the product from dirt, moisture and overheating and use it in dry environments only.
  • Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
  • Only use the article under moderate climatic conditions.
  • As with all electrical products, this device should be kept out of the reach of children.
  • Do not operate the product outside the power limits specified in the technical data.
  • Do not use the product in a damp environment and avoid splashing water
  • While driving a car or using sports equipment, do not allow yourself to be distracted by your product and keep an eye on the traffic situation and your surroundings.
  • The battery is permanently installed and cannot be removed; dispose of the product as a whole in accordance with the statutory regulations.
  • Do not incinerate the battery or the product.
  • Do not tamper with or damage/heat/disassemble the batteries/rechargeable batteries.
  • Do not use the product during the charging process!

Warning – rechargeable battery

  • Only use suitable charging devices or USB connections to charge the product.
  • Do not use defective chargers or USB ports and do not attempt to repair them.
  • Do not overcharge the product or allow the battery to completely discharge.
  • Avoid storing, charging and using in extreme temperatures and at extremely low atmospheric pressures (such as at high altitudes).
  • Charge regularly (at least quarterly) during periods of prolonged storage.

Warning – magnets

  • This product generates magnetic fields. Persons with a cardiac pacemaker should consult a doctor before using this product, as the pacemaker’s proper function could beaffected.
  • Do not store bank or similar cards with magnetic strips near the charging box or earphones. The data on the cards could be damaged or completely deleted.

Warning – high volume

  • High sound pressure!
  • There is a risk of hearing damage.
  • To prevent any loss of hearing, avoid listening at loud volumes for prolonged periods.
  • Always keep the volume at a sensible level. Loud volumes, even over short periods, can cause hearing loss.
  • Using this product limits your perception of ambient noise. You should therefore not drive or operate machinery while using them.

Switching on/off

ON Press the MFB button (4) for around 3 seconds until a signal tone is heard and the LED (5) flashes blue.

OFF To switch off, press the MFB button (4) for around 3 seconds until a signal tone is heard and the LED (5) flashes red and then goes out.

Switching on/off

Note – Automatic switch-off of the headphones The headphones are equipped with an automatic switch-off mechanism. If there is no connection toyour device within 3 minutes, they switch off automatically.

 Charging

Fully charge the headphones once before using them for the first time.

  1. Switch off the headphones and connect them
    Ensure that the headphones are switched off before charging them. Connect the USB charging cable included to the charging socket (7). Connect the free plug on the micro-USB charging cable to a suitable USB charger. To do this, consult the operating instructions for the USB charger you are using.
    Charging

  2. Charging process for the headphones
    The LED (5) lights up solid red during the charging process. Once the charging process is complete, the LED (5) goes out.
    Charging process

  3. Battery capacity
    When the headphone battery capacity is low, the LED (5) flashes red and a signal tone is heard.
    Note
    During the charging process, the Bluetooth® connection is automatically disconnected.

 Bluetooth® pairing

Note – Pairing

  • Make sure that your Bluetooth®-capable device is switched on and that Bluetooth® is activated.
  • For more information, please refer to the operating instructions of your device.

The headphones and the device should not be more than 1 metre apart. The shorter the distance, the better. Switch the headphones on using the MFB key (4).

Check the status of the status LED (5) and the signal tone
Status LED

If the LED (5) is flashing alternately and a signal tone is heard:
Headphones searching for a Bluetooth® connection.
Status LED

If the LED (5) is flashing and a signal tone is heard:
The headphones are already paired with a Bluetooth® device.

Status LED

Search using your device for the headphones (only required on the first connection)
Open the Bluetooth® settings on your device and wait until the list of found Bluetooth® devices shows Hama Freedom Lit. Select Hama Freedom Lit and wait until the headphones are shown as connected in your device’s Bluetooth® settings.
Bluetooth connection

Note – Bluetooth® password
Some devices require a password in order to connect to another Bluetooth® device.

  • If your device requests a password to connect to the headphones, enter 0000.

Disconnecting the Bluetooth® connection
Disconnect the headphones via your device’s Bluetooth® settings.

Controls

Note

  • Please be aware that your terminal device must support some functions if they are to be used.
  • For more information, please refer to the operating instructions of your device.

Voice iconVoice assistant function

Press the MFB button (4) three times to initiate communication with your Siri or Google Assistant. As soon as you hear a signal tone, your voice assistant is ready to assist you.

Note – Siri
Siri is only available on suitable devices running iOS 5 (iPhone 4s or later) or higher.

Note – Google Assistant

  • The Google Assistant is only available on suitable devices running Android 5.0 or higher with Google Play Services, >1.5 GB of free memory and a minimum screen resolution of 720P.
  • The Google Assistant App must be available on your device and be set as the default voice assistant.

Hands-free function
It is possible to use the earphones like a hands-free facility for your mobile phone.

  1. Make a call
    Dial the number directly via your device to make a call.

  2. Accept a call
    Accept a call

    Press the MFB button (4) to accept an incoming call.

  3. Reject a call
    Reject a call

    Press and hold the MFB key (4) for around 2 seconds or use your device to reject an incoming call.

  4. End a call
    End a call

    During the call, press the MFB button (4) once to end the call.

  5. Last number redial
    Last number redial

    Press the MFB button (4) twice to redial the last number.

Audio playback

Note
Please note that this function is only possible when a Bluetooth® connection is active.

  1. Start playback on your device.

  2. Play / Pause
    Play / Pause

    Press the MFB button (4) once to pause or start audio playback.

  3. Next track
    Next track

    Press the + button (1) once to skip to the next track.

  4. Previous track
    Previous track

    Press the – button (2) once to skip to the previous track.

Volume control

  1. Increase volume
    Increase volume

    Press and hold the + button (1) for 2 seconds to increase the volume. Once the maximum volume is reached, the announcement “beep beep” is heard.

  2. Reduce volume
    Reduce volume

    Press and hold the – button (2) for 2 seconds to reduce the volume. Once the minimum volume is reached, you will hear “beep beep”.

Audio playback via an audio cable (not included in the package contents)
In addition to the connection via Bluetooth®, you can also connect these headphones using an AUX cable. To do this, plug one end into the device and the other end into the audio input (6). When the audio cable is inserted, the Bluetooth® connection is automatically disconnected. The headphones now function like cabled headphones.
Connection

Setting icon Technical data

Bluetooth® headphones

Impedance headphones /
microphone| 32Ω / < 2.2 kΩ
Frequency headphones /
microphone| 20Hz – 20 kHz / 50Hz – 8 kHz
Sensitivity
Headphones / microphone| 98 dB / -42 dB
Range| Max. 10m
Bluetooth® technology| v5.0
Profiles| HFP V1.7 / A2DP V1.3 / AVRCP V1.6
Transmission frequency| 2.4 – 2.48GHz
Rechargeable battery| Li-Po 3.7 V
Battery capacity| 180 mAh
Power consumption| Max. 150mA
Charging voltage| max. 5 V USB
Total weight| 120 g
Standby /
music / talk time| max. 185 d / 8 h / 8 h

Information icon Care and maintenance

Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents.

Warranty disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

Service and Support

Please contact Hama Product Consulting if you have any questions about this product.
Hotline: +49 9091 502-0 (German/English)
Further support information can be found here: www.hama.com

Recycling information

Note on environmental protection:
 After the implementation of the European Directives 2012/19/EU and 2006/66/EU in the national legal system, the following applies: Electrical and electronic devices as well as batteries must not be disposed of with household waste. Consumers are obliged by law to return electrical and electronic devices as well as batteries to the designated public collection points or to the point of sale at the end of their service lives. Detailed information on this topic is defined in the national laws of the respective country. This presence of the above symbol on the product, operating instructions or package indicates that the product is subject to these regulations. By recycling, reusing the materials or other forms of utilising old devices/ batteries, you are making an important contribution to protecting our environment.

Declaration of Conformity

 Hama GmbH & Co KG hereby declares that the radio equipment type [00184084, 00184085, 00184086, 00184087, 00184088, 00184089] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following Internet address: www.hama.com->00184084, 00184085, 00184086, 00184087, 00184088, 00184089 ->Downloads.

Frequency band(s) 2402MHz – 2480MHz
Maximum radio-frequency power transmitted 2,5mW E.I.R.P.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals