WaterSaver L4800FT-325 Laboratory Water Valves User Manual
- June 4, 2024
- WaterSaver
Table of Contents
WaterSaver L4800FT-325 Laboratory Water Valves
Laboratory Water Valves
L4800FT-325
Water Valve, Wall Mounted
- Mounting: For installation on vertical surfaces (such as drywall) where there is no access behind wall during installation. Valve is threaded onto nipple stubbed out of wall. Threaded escutcheon is then backed up to wall to secure valve and conceal pipe.
- Valve Body: Straight pattern forged brass.
- Valve Unit: WaterSaver self-contained compression valve unit with replaceable stainless steel seat.
- Handle: Forged brass four-arm handle with color-coded index disc.
- Inlet: 3/8″ NPT female inlet with adjustable escutcheon.
- Outlet: 3/8″ NPT female outlet with removable anti-splash serrated hose end.
- Quality Assurance: Fixture is fully assembled and factory tested prior to shipment.
- Note: If vacuum breaker is required, add suffix “110”.
L4800F-225WSA
Water Valve, Panel/Overhead Mounted
- Mounting: For installation on vertical or horizontal surfaces (such as pipe chases and service carriers) where there is access behind surface during installation. Threaded mounting shank is inserted through hole in surface and secured with locknut and washer.
- Valve Body: Straight pattern forged brass.
- Valve Unit: WaterSaver self-contained compression valve unit with replaceable stainless steel seat.
- Handle: Forged brass four-arm handle with color-coded index disc.
- Inlet: Furnished with 3/8″ IPS mounting shank (assembled), locknut and washer. 3/8″ NPT male inlet.
- Outlet: 3/8″ NPT female outlet with removable anti-splash serrated hose end.
- Quality Assurance: Fixture is fully assembled and factory tested prior to shipment.
- Note: If vacuum breaker is required, add suffix “110”.
L5100FT-325
Water Valve, Wall Mounted
- Mounting: For installation on vertical surfaces (such as drywall) where there is no access behind wall during installation. Valve is threaded onto nipple stubbed out of wall. Threaded escutcheon is then backed up to wall to secure valve and conceal pipe.
- Valve Body: Angle pattern forged brass.
- Valve Unit: WaterSaver self-contained compression valve unit with replaceable stainless steel seat.
- Handle: Forged brass four-arm handle with color-coded index disc.
- Inlet: 3/8″ NPT female inlet with adjustable escutcheon.
- Outlet: 3/8″ NPT female outlet with removable anti-splash serrated hose end.
- Quality Assurance: Fixture is fully assembled and factory tested prior to shipment.
- Note: If vacuum breaker is required, add suffix “110”.
L5100F-225WSA
Water Valve, Panel/Overhead Mounted
- Mounting: For installation on vertical or horizontal surfaces (such as pipe chases and service carriers) where there is access behind surface during installation. Threaded mounting shank is inserted through hole in surface and secured with locknut and washer.
- Valve Body: Angle pattern forged brass.
- Valve Unit: WaterSaver self-contained compression valve unit with replaceable stainless steel seat.
- Handle: Forged brass four-arm handle with color-coded index disc.
- Inlet: Furnished with 3/8″ IPS mounting shank (assembled), locknut and washer. 3/8″ NPT male inlet.
- Outlet: 3/8″ NPT female outlet with removable anti-splash serrated hose end.
- Quality Assurance: Fixture is fully assembled and factory tested prior to shipment.
- Note: If vacuum breaker is required, add suffix “110”.
Options for Water Valves
Valve Unit: Compression valve unit with adjustable volume control (add prefix
“LA”) or ceramic disc valve unit (add prefix “LC”). Outlet: BO127S aspirator
in place of serrated hose end (add suffix “127”).
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>