iGaur XG21008 Wireless Charger Bluetooth Speaker Instruction Manual
- June 12, 2024
- iGaur
Table of Contents
iGaur XG21008 Wireless Charger Bluetooth Speaker
PRODUCT INSTRUCTIONS
Thank you very much for choosing our products, please read the instructions carefully before using the product.
FEATURES
- Exquisite and Practical
- Phone Stand Function
- Adjustable Lighting Angle
- Charging Distance €8mm
- Wireless Charging
- TWS interconnect
- Wireless Speaker
- Handsfree
- Carry Conveniently
- Lamp
APPEARANCE CHARACTERISTICS
Wireless Charging
- Reference Point
- On/off and Dimming
- lampshade
- unction Button
- Type-c Interface.
- Speaker Cavity
- Indicator Light (Blue and Red)
OPERATION METHOD
- Plug the USB data cable to the 5V= -3A 9V= -2A power adapter, and connect the other end to the Type-C interface.
- After the product is powered on, the product indicator red light stays on.
- Place the device that needs to be charged in the charging indication area of the product. The blue light is always on, and it enters the charging state
HANDLE ROTATION ANGLE DESCRIPTION
Warning: The handle rotation Angle is within 270° as shown in the
picture. Do not rotate 360°
LIGHT TOUCH FUNCTION
- Touch the first time to start the light at 10% brightness.
- Touch the second time to change the light to 70% brightness.
- Touch the third time to change the light to 70% brightness.
- Touch the fourth time to turn off the lick.
BUTTON FUNCTION
Power switch/play/pause hands-free calling/TWS stereo surround Press and hold for 5 seconds to turn on the speaker. in the playback state, short press to pause the song, and short press again to play the song. When there is a phone call, short press to answer the call, and long press for 2 seconds to reject the call; In the power-on state, press and hold for 5 seconds to power off. Double-click the power button of any speaker to enter the TWS pair speaker mode.
Volume up/next song
In the playback state, a short press to increase the volume, and “most volume”
will occur when the volume is maximized. Long press will play the next song.
Volume down/last song
In the playback state, a short press in order to decrease the volume, long
press will play the previous song.
TURN ON YOUR SPEAKER USE
In the off state, press the play button for about 5 seconds, and there is a
beep sound, indicating that the speaker is searching for pairing, the blue
light flashes quickly. At this time, turn on the Bluetooth function of your
mobile phone. In the Bluetooth device, search for Bluetooth click to select
the [iGaur S10 ] device name and it automatically enters the pairing. After
the pairing is successful, there will be a beep and the blue light will be on.
If you are not using the speaker, please press and hold the power button for 5
seconds to shut down to avoid power consumption.
Notes
- Model: XG21008A (without built-in Li-battery), It can be used only when it is plugged in.
- Model: XG21008B (without built-in Li-battery+ without Bluetooth speaker ). It can be used only when it is plugged in.
TWS INTERCONNECT
- Double-click the power switch of any speaker to enter this pair speaker mode. waiting for about 8 seconds, the two speakers are interconnected. after the connection is successful, the blue light of the main unit flashes quickly and the blue light of the slave unit stays on. the main unit keeps pairing with the mobile phone Bluetooth and realizes the surround effect of left and right stereo channels.
- double-click the power switch of any speaker to turn off TWS pair sparked mode, and you can play music separately.
PHONE HOLDER OPERATING INSTRUCTIONS
-
Lean the phone on the handle and tilt it to a comfortable angle to play the video. after the Bluetooth is connected to the speaker, the speaker source of the mobile phone is output to the speaker amplifier to enjoy the super
bass surround effect. See picture 1 -
Rotate the handle to the back of the speaker, and tilt the Wireless charging surface of the speaker to a comfortable angle, You can wirelessly charge the phone while playing and watching the video, the phone speaker source is output to the speaker for amplification and enjoy the super bass surround effect. See picture 2
-
When the thickness of the phone is too high, the buttons cannot support the phone and need to be installed With accessories put the heightened button on the original button. See picture 3
CARRYING OUT INSTRUCTIONS
Built-in 5000mAh lithium battery power supply, carry conveniently
- When going out and using it, press and hold the power button [U]for 5 seconds to turn it on, and all functions can be used normally
- When the mobile phone has a wireless charging function, it can be charged directly on the speaker charging panel. See picture A and b
- When turned on, the speaker is always in the search state and can be connected and paired.
- When not in use, be sure to press and hold the power button [U]for 5 seconds to shut down to avoid power consumption.
- Built-in lithium batteries, cannot be replaced, do not discard or put in the fire, so as to avoid danger.
APPLICABLE DEVICE
Intelligent identification of charging devices, compatible with major brands;
Phone: iPhone12/1 2Pro,iPhonell/11Pro/11 Pro Max iPhones/Xs Max,iPhone XR
iPhone X iPhone8/8Plus; Samsung: GalaxyS7/GalaxyS8/GalaxyS9; Note8, Note9;
Huawei: MateRS/Mate20Pro/Mate20RS; P30Pro; Xiaomi: MIX2S, MIX3;
Note: This product supports a wireless charging function and realizes
short-range wireless energy transmission by magnetic induction. with
overcharge protection, overvoltage protection (6.5V), and overcurrent
protection (2A). Please use the power adapter that has obtained a CC
certificate and meets relevant standards
PRECAUTIONS
- Do not use the product in direct sunlight or high temperature for a long time.
- Do not charge too close to magnetic cards, magnetic recording media, and precision instruments.
- Do not disassemble or modify this product.
- Do not touch the AC adapter with wet hands.
- Keep the product away from water or other liquids.
- If you want to clean this product, disconnect the power.
- Product working environment temperature range 20-45°C.
WIRELESS CHARGING SPECIFICATIONS
- Power Input: 5V=-3A 9V==-2A
- Output Power: 5W -15W
- Charging Efficiency: 65%
- Lithium Battery Capacity: 5000mAh
- (Model: XG21008A and XG21008B without built-in Li-battery)
- Product Size: 226×126×57mm
- The power charging port is the international universal
Type-C port SPEAKER SPECIFIC ATION
- Audio Specifications Bluetooth Version: 5.2
- Speaker Power: 4 810w
- Speaker Specifications: 66mm
- Bluetooth Distance: 10m
Manufacturer: Shenzhen Gaur Technology Co. Ltd
Address: 5 Floor, A Building, Zhuangbian Area,
Hezhou Baoan, Shenzhen.
Service Hotline: +86 0755-82810069
Website: www.igaur.cn
Made in China