babyhug LFB-R1M3 Harley Quinn Bike Owner’s Manual

babyhug LFB-R1M3 Harley Quinn Bike

IMPORTANT! KEEP THIS MANUAL FOR FUTURE USE

ABOUT “Babyhug” PRODUCT

Thank you for purchasing BabyHug. We have devoted ourselves to create comfortable and safe electronic toys, thus offering a colorful childhood for your children.

• It is very important to read these instructions carefully before usage. This instruction Book not only specifies assembly process but also proper application method. It also helps to avoid injury or damage to the product in case of incorrect operation.
• This product can be operated in Battery Operated mode with Forward, Reverse, Left, Right, and equipped with functions like a headlight, and built-in music playing.

SPECIFICATION

Parts

No                 Description| Qty

8                 Side Indicator Light

9                 Back Number Plate

10                Bike Mirror Set

11                Back Rod

12                Wheel Cap

|

4

2

|
|

BATTERY CARE AND DISPOSAL

BATTERY CHARGING

Adults Note: Periodically examine this battery charger for damage to the cord, housing or other parts that may result in the risk of fire, electric shock or injury. If the battery charger is damaged, do not use it. Make sure you charge the battery for at least 18 hours using the enclosed 12-volt charger before operating your vehicle for the first time. Charge the battery for at least 12 hours after each use of the vehicle. Do not need to remove the battery from your vehicle to recharge it. Never charge the battery longer than 24 hours. Failure to follow these instructions may damage your battery and will void your warranty. Before charging the battery, examine the battery case for cracks and other damage which may cause the electrolyte to leak during the charging Process. Battery acid is very corrosive and can cause severe damage to the surface it contacts. Charge the battery in a well ventilated area.

BATTERY CARE

• First plug the charger connector into the battery socket. Then plug the charger into a standard wall outlet. Use the charger only in a wall outlet. Do not plug the charger into a ceilling outlet.
• If power flow to the wall outlet is controlled by a switch, make sure the switch is “OW
• Once the battery is charged, remove the charger connector from the battery and then uplug the charger from the wall outlet. Refer to the battery installation section for instructions to install your battery. If your battery is already installed in your vehicle, simply reconnect the motor harness connector to the battery.

PARTS OF TOY

• If you are missing a part, please call us at +91-135-3501241 or write to customercare@brainbees.com rather than return this product to the store.
• Wipe the surface of the each part with a clean, and cloth to remove any dust of oils.
• Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded.

All Parts to be assembled by customer (DIY) only

I INSTALLATION INSTRUCTIONS

• Connect foot pedal wire then push both the pedals firmly into the respective grooves.
• Remove the under body screws, place the training wheel frame in the groove and screw down.
• After connecting the cables, fix the bike head with the body clamping slot, Fix the front wheel line with supplied screws.
• Install front wheel assembly into the vehicle body, fix the handle bar by pressing through the bike body, adjust the hole between handlebar and front wheel and finally fix with supplied nut & bull.
• Finally connect the battery cable correctly and Screw the base plate.

TOY VEHICLE USE

WARNING

PREVENT INJURIES

• Direct adult supervision is required.
• Never ride at night.
• Keep children with in safe riding areas. these area must be away
  • From Swimming pools and other water bodies to prevent drowning.
  • From uneven floor to prevent tipovers.
  • From steps, steep inclines, cars, roads and alleys.
• Riding Rules: Make sure that the children follow these rules for safe driving & riding
  • Always sit on the seat.
  • Always wear shoes.
  • Only one rider at a time.

BATTERY USE

danger

• Keep out of the reach of the children.
• Do not open battery.
• Connect battery as directed.

TO PREVENT INJURIES:

• Do not make direct contact with the battery terminals, as it might cause an explosion or fire.
• Only Adults should change the battery.
• The battery must be handled by adults only. It contains Sulfuric Acid gel as an electrolyte. Dropping the battery could result in serious injury.

TO PREVENT FIRE:

• Do not operate the toy vehicle near flammable. The vehicle’s electrical switches and motor ignite an internal spark which could cause an explosion or fire.
• Examine battery, charger & Connectors for excessive damage/wear each time you charge the battery. If damage or excessive wear is detected, do not charge the battery until you replace the worn part.
• Never modify the electrical circuit. Alterations might cause excessive heating and fire.

STORAGE BATTERY MAINTENANCE

• Please charge 8 to 12 hours before first time use.
• Use the suitable adapter to charge the battery, otherwise the toy battery might get damaged.
• Please charge the car once the speed is slower than normal, otherwise it will derease battery life.
• Please fully charge the battery before you put your ride-on ideal, and remember to recharge the battery every 30 days. This will ensure the normal use of the battery, otherwise, the battery can not be charged.
• For safety, please ONLY use the battery supplied by the manufacturer which has been protected with polarity anti-reverse structure.

RIDE-ON FUNCTION

• Press the start button to start the toy.
• Press “Forward Switch and turn the accelerator to move the toy forward.
• Press the foot brake to stop.
• Press “Back Switch” and turn the hand accelerator to move the toy backward.

CARE AND MAINTENANCE

• Do not use if there is any damage.
• Check and maintain the toy at regular interval to keep your child safe.
• Periodically check and make sure that neither screws are loosen nor any spare parts are damaged.
• Before installing and using the toy, please check all spare parts carefully. For avoiding unnecessary damages, Please read this instruction in detail before aseembly and disassembly.

MAINTENANCE RECORD

• Date
• Details
• Result
• Remarks
  • Customer Name : Register your product on the manufacturer’s website to get an exciting offer.
  • Invoice No & Date:
  • Model Number: LFB-R1M
  • Retailer Seal & Sign :
  • Batch Number QC Officer Sign :
  • Packing Officer Sign :

TROUBLESHOOTING GUIDE

VEHICLE CARE

Check all Screws, fasteners and their protective coverings regularly and tighten as required. Check plastic parts on a regular basis for cracks or broken pieces. During snowy or rainy weather, store the vehicle inside or under a protective cover. Charge the battery at least once per month while your vehicle is not in regular use. Avoid operating the vehicle in wet or snowy conditions, and do not spray the vehicle with a hose. Do not wash the vehicle with soap and water.Water or moisture in the motors or electrical switches can cause them to corrode, and could cause switch or motor failure. Avoid operating the vehicle on sand, loose dirt or gravel. Sand, loose dirt or gravel in the motors or electrical switches can cause them to jam, and could cause switch or motor failure. Wipe the vehicle with a soft, dry cloth. For a Shiny finish, use a non- wax furniture polish and soft cloth. Do not use automotive wax.This toy has been tested and found to comply within limits for a safety of electrical toys pursuant to IS 15644:2006 & IS 9873 (Part 1, 3, 4, 7 & 9). However the manufacturer do not hold any responbility for the damage caused due to misuse or abuse of the product. These limits are designed to comply with the International level of safety of electric toys by Bureau of Indian Standards for child safety.

If the quantity and shape of some spare parts in this manual are missing from that of product you buy, Please call us at +91-135-3501241 or write to customercare@brainbees.com rather than return this product to the store.

FOR ANY FEEDBACK, CONTACT :
Customer Care Executive : +91-135-3501241 customercare@brainbees.com Brainbees Solutions Pvt. Ltd. Rajashree Business Park, Plot No. 114, Survey No. 338, Tadiwala Road, Near Sohrab Hall, Pune-411001
Write to: customercare@brainbees.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>